BD9576MUF provides over-current protection and detection. Current is measured as voltage loss over external FET. Allow specifying FET's on resistance so current monitoring limits can be converted to voltages. Signed-off-by: Matti Vaittinen Reviewed-by: Rob Herring --- v5 onwards: - No changes v4: - Fixed the description indentiation --- .../bindings/regulator/rohm,bd9576-regulator.yaml | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/Documentation/devicetree/bindings/regulator/rohm,bd9576-regulator.yaml b/Documentation/devicetree/bindings/regulator/rohm,bd9576-regulator.yaml index b6515a0cee62..7cb74cc8c5d9 100644 --- a/Documentation/devicetree/bindings/regulator/rohm,bd9576-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/rohm,bd9576-regulator.yaml @@ -27,6 +27,12 @@ patternProperties: Properties for single regulator. $ref: "regulator.yaml#" + properties: + rohm,ocw-fet-ron-micro-ohms: + description: | + External FET's ON-resistance. Required if VoutS1 OCP/OCW is + to be set. + required: - regulator-name -- 2.25.4 -- Matti Vaittinen, Linux device drivers ROHM Semiconductors, Finland SWDC Kiviharjunlenkki 1E 90220 OULU FINLAND ~~~ "I don't think so," said Rene Descartes. Just then he vanished ~~~ Simon says - in Latin please. ~~~ "non cogito me" dixit Rene Descarte, deinde evanescavit ~~~ Thanks to Simon Glass for the translation =]