Re: [PATCH] phy: qcom-qmp: Correct READY_STATUS poll break condition

[Marc Gonzalez <marc.w.gonzalez@free.fr>]

On 19/07/2019 17:50, Marc Gonzalez wrote:

> On 13/06/2019 11:10, Marc Gonzalez wrote:
> 
>> Here are my observations for a 8998 board:
>>
>> 1) If I apply only the readl_poll_timeout() fix (not the mask_pcs_ready fixup)
>> qcom_pcie_probe() fails with a timeout in phy_init.
>> => this is in line with your regression analysis.
>>
>> 2) Your patch also fixes a long-standing bug in UFS init whereby sending
>> lots of information to the console during phy init would lead to an
>> incorrectly diagnosed time-out.
>>
>> Good stuff!
>>
>> Reviewed-by: Marc Gonzalez <marc.w.gonzalez@free.fr>
>> Tested-by: Marc Gonzalez <marc.w.gonzalez@free.fr>
> 
> It looks like this patch fixed UFS, but broke PCIe and USB3 ^_^
> 
> qcom-qmp-phy 1c06000.phy: Registered Qcom-QMP phy
> qcom-qmp-phy c010000.phy: Registered Qcom-QMP phy
> qcom-qmp-phy 1da7000.phy: Registered Qcom-QMP phy
> 
> qcom-qmp-phy 1c06000.phy: BEFORE=000000a6 AFTER=000000a6
> qcom-qmp-phy 1c06000.phy: phy initialization timed-out
> phy phy-1c06000.phy.0: phy init failed --> -110
> qcom-pcie: probe of 1c00000.pci failed with error -110
> 
> qcom-qmp-phy 1da7000.phy: BEFORE=00000040 AFTER=0000000d
> 
> qcom-qmp-phy c010000.phy: BEFORE=69696969 AFTER=b7b7b7b7
> qcom-qmp-phy c010000.phy: phy initialization timed-out
> phy phy-c010000.phy.1: phy init failed --> -110
> dwc3 a800000.dwc3: failed to initialize core: -110
> dwc3: probe of a800000.dwc3 failed with error -110
> 
> 
> Downstream code for PCIe is:
> 
> static bool pcie_phy_is_ready(struct msm_pcie_dev_t *dev)
> {
> 	if (dev->phy_ver >= 0x20) {
> 		if (readl_relaxed(dev->phy + PCIE_N_PCS_STATUS(dev->rc_idx, dev->common_phy)) &	BIT(6))
> 			return false;
> 		else
> 			return true;
> 	}
> 
> 	if (!(readl_relaxed(dev->phy + PCIE_COM_PCS_READY_STATUS) & 0x1))
> 		return false;
> 	else
> 		return true;
> }
> 
> AFAICT:
> PCIe and USB3 QMP PHYs are ready when PHYSTATUS=BIT(6) goes to 0.
> But UFS is ready when PCS_READY=BIT(0) goes to 1.
> 
> 
> Can someone verify that USB3 is broken on 845 with 885bd765963b?

Suggested fix:

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c
index 34ff6434da8f..11c1b02f0206 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.c
@@ -1447,6 +1447,11 @@ static int qcom_qmp_phy_com_exit(struct qcom_qmp *qmp)
 	return 0;
 }
 
+static bool phy_is_ready(unsigned int val, unsigned int mask)
+{
+	return mask == PCS_READY ? val & mask : !(val & mask);
+}
+
 static int qcom_qmp_phy_enable(struct phy *phy)
 {
 	struct qmp_phy *qphy = phy_get_drvdata(phy);
@@ -1548,7 +1553,7 @@ static int qcom_qmp_phy_enable(struct phy *phy)
 	status = pcs + cfg->regs[QPHY_PCS_READY_STATUS];
 	mask = cfg->mask_pcs_ready;
 
-	ret = readl_poll_timeout(status, val, val & mask, 10,
+	ret = readl_poll_timeout(status, val, phy_is_ready(val, mask), 10,
 				 PHY_INIT_COMPLETE_TIMEOUT);
 	if (ret) {
 		dev_err(qmp->dev, "phy initialization timed-out\n");