linux-block.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jens Axboe <axboe@kernel.dk>
To: linux-fsdevel@vger.kernel.org, linux-aio@kvack.org,
	linux-block@vger.kernel.org
Cc: hch@lst.de, viro@zeniv.linux.org.uk, Jens Axboe <axboe@kernel.dk>
Subject: [PATCH 15/22] aio: pass in user index to __io_submit_one()
Date: Fri, 21 Dec 2018 12:22:29 -0700	[thread overview]
Message-ID: <20181221192236.12866-16-axboe@kernel.dk> (raw)
In-Reply-To: <20181221192236.12866-1-axboe@kernel.dk>

This is used for the user iocb pointer right now, but in preparation
for having iocbs not reside in userspace, unionize with a ki_index
and pass that in instead.

Signed-off-by: Jens Axboe <axboe@kernel.dk>
---
 fs/aio.c | 20 ++++++++++++++------
 1 file changed, 14 insertions(+), 6 deletions(-)

diff --git a/fs/aio.c b/fs/aio.c
index d33417bee594..9e9b49fe9a8b 100644
--- a/fs/aio.c
+++ b/fs/aio.c
@@ -209,7 +209,11 @@ struct aio_kiocb {
 	struct kioctx		*ki_ctx;
 	kiocb_cancel_fn		*ki_cancel;
 
-	struct iocb __user	*ki_user_iocb;	/* user's aiocb */
+	union {
+		struct iocb __user	*ki_user_iocb;	/* user's aiocb */
+		unsigned long		ki_index;
+	};
+
 	__u64			ki_user_data;	/* user's data for completion */
 
 	struct list_head	ki_list;	/* the aio core uses this
@@ -1192,7 +1196,7 @@ static void iocb_put_many(struct kioctx *ctx, void **iocbs, int *nr)
 static void aio_fill_event(struct io_event *ev, struct aio_kiocb *iocb,
 			   long res, long res2)
 {
-	ev->obj = (u64)(unsigned long)iocb->ki_user_iocb;
+	ev->obj = iocb->ki_index;
 	ev->data = iocb->ki_user_data;
 	ev->res = res;
 	ev->res2 = res2;
@@ -2299,7 +2303,7 @@ static ssize_t aio_poll(struct aio_kiocb *aiocb, const struct iocb *iocb)
 }
 
 static int __io_submit_one(struct kioctx *ctx, const struct iocb *iocb,
-			   struct iocb __user *user_iocb,
+			   unsigned long ki_index,
 			   struct aio_submit_state *state, bool compat)
 {
 	struct aio_kiocb *req;
@@ -2346,14 +2350,17 @@ static int __io_submit_one(struct kioctx *ctx, const struct iocb *iocb,
 	}
 
 	if (aio_ctx_supports_cancel(ctx)) {
+		struct iocb __user *user_iocb = (struct iocb __user *) ki_index;
+
 		ret = put_user(KIOCB_KEY, &user_iocb->aio_key);
 		if (unlikely(ret)) {
 			pr_debug("EFAULT: aio_key\n");
 			goto out_put_req;
 		}
-	}
+		req->ki_user_iocb = user_iocb;
+	} else
+		req->ki_index = ki_index;
 
-	req->ki_user_iocb = user_iocb;
 	req->ki_user_data = iocb->aio_data;
 
 	ret = -EINVAL;
@@ -2419,12 +2426,13 @@ static int __io_submit_one(struct kioctx *ctx, const struct iocb *iocb,
 static int io_submit_one(struct kioctx *ctx, struct iocb __user *user_iocb,
 			 struct aio_submit_state *state, bool compat)
 {
+	unsigned long ki_index = (unsigned long) user_iocb;
 	struct iocb iocb;
 
 	if (unlikely(copy_from_user(&iocb, user_iocb, sizeof(iocb))))
 		return -EFAULT;
 
-	return __io_submit_one(ctx, &iocb, user_iocb, state, compat);
+	return __io_submit_one(ctx, &iocb, ki_index, state, compat);
 }
 
 #ifdef CONFIG_BLOCK
-- 
2.17.1


  parent reply	other threads:[~2018-12-21 19:23 UTC|newest]

Thread overview: 39+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-12-21 19:22 [PATCHSET v10] Support for polled and buffered aio (and more) Jens Axboe
2018-12-21 19:22 ` [PATCH 01/22] fs: add an iopoll method to struct file_operations Jens Axboe
2018-12-21 19:22 ` [PATCH 02/22] block: add bio_set_polled() helper Jens Axboe
2018-12-21 19:22 ` [PATCH 03/22] block: wire up block device iopoll method Jens Axboe
2018-12-21 19:22 ` [PATCH 04/22] block: use REQ_HIPRI_ASYNC for non-sync polled IO Jens Axboe
2018-12-21 19:25   ` Jens Axboe
2018-12-27 13:15     ` Christoph Hellwig
2018-12-27 20:22       ` Jens Axboe
2018-12-21 19:22 ` [PATCH 05/22] block: use bio_set_polled() helper for O_DIRECT Jens Axboe
2018-12-21 19:22 ` [PATCH 06/22] iomap: wire up the iopoll method Jens Axboe
2018-12-21 19:22 ` [PATCH 07/22] aio: add io_setup2() system call Jens Axboe
2018-12-27 13:55   ` Christoph Hellwig
2018-12-27 20:27     ` Jens Axboe
2018-12-21 19:22 ` [PATCH 08/22] aio: support for IO polling Jens Axboe
2018-12-27 13:55   ` Christoph Hellwig
2018-12-27 20:29     ` Jens Axboe
2018-12-21 19:22 ` [PATCH 09/22] aio: add submission side request cache Jens Axboe
2018-12-27 13:56   ` Christoph Hellwig
2018-12-27 20:31     ` Jens Axboe
2018-12-21 19:22 ` [PATCH 10/22] fs: add fget_many() and fput_many() Jens Axboe
2018-12-21 19:22 ` [PATCH 11/22] aio: use fget/fput_many() for file references Jens Axboe
2018-12-21 19:22 ` [PATCH 12/22] aio: split iocb init from allocation Jens Axboe
2018-12-21 19:22 ` [PATCH 13/22] aio: batch aio_kiocb allocation Jens Axboe
2018-12-21 19:22 ` [PATCH 14/22] aio: split old ring complete out from aio_complete() Jens Axboe
2018-12-21 19:22 ` Jens Axboe [this message]
2018-12-21 19:22 ` [PATCH 16/22] aio: add support for submission/completion rings Jens Axboe
2018-12-27 13:47   ` Christoph Hellwig
2019-01-02 16:28     ` Jens Axboe
2019-01-02 20:32       ` Jens Axboe
2019-01-02 19:11   ` Jeff Moyer
2018-12-21 19:22 ` [PATCH 17/22] block: implement bio helper to add iter bvec pages to bio Jens Axboe
2018-12-21 19:22 ` [PATCH 18/22] aio: add support for pre-mapped user IO buffers Jens Axboe
2018-12-27 13:57   ` Christoph Hellwig
2018-12-21 19:22 ` [PATCH 19/22] aio: support kernel side submission for aio with SCQRING Jens Axboe
2018-12-27 13:57   ` Christoph Hellwig
2018-12-27 20:34     ` Jens Axboe
2018-12-21 19:22 ` [PATCH 20/22] aio: enable polling for IOCTX_FLAG_SQTHREAD Jens Axboe
2018-12-21 19:22 ` [PATCH 21/22] aio: utilize io_event->res2 for CQ ring Jens Axboe
2018-12-21 19:22 ` [PATCH 22/22] aio: add my copyright Jens Axboe

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181221192236.12866-16-axboe@kernel.dk \
    --to=axboe@kernel.dk \
    --cc=hch@lst.de \
    --cc=linux-aio@kvack.org \
    --cc=linux-block@vger.kernel.org \
    --cc=linux-fsdevel@vger.kernel.org \
    --cc=viro@zeniv.linux.org.uk \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).