linux-block.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Matias Bjørling" <mb@lightnvm.io>
To: Minwoo Im <minwoo.im.dev@gmail.com>,
	linux-block@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: "Klaus Birkelund" <klaus@birkelund.eu>,
	"Javier González" <javier@javigon.com>,
	"Chaitanya Kulkarni" <Chaitanya.Kulkarni@wdc.com>
Subject: Re: [PATCH 1/2] lightnvm: introduce pr_fmt for the prefix nvm
Date: Sun, 11 Aug 2019 21:43:46 +0200	[thread overview]
Message-ID: <712c30cc-4b23-087c-39fa-b919ed0529da@lightnvm.io> (raw)
In-Reply-To: <20190727182626.27991-2-minwoo.im.dev@gmail.com>

On 7/27/19 8:26 PM, Minwoo Im wrote:
> all the pr_() family can have this prefix by pr_fmt.
> 
> Changes to V2:
>    - Fix typo in title (s/previx/prefix)
> 
> Changes to V1:
>    - Squashed multiple lines to make it short (Chaitanya)
> 
> Cc: Matias Bjørling <mb@lightnvm.io>
> Cc: Javier González <javier@javigon.com>
> Cc: Chaitanya Kulkarni <Chaitanya.Kulkarni@wdc.com>
> Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com>
> Reviewed-by: Javier González <javier@javigon.com>
> ---
>   drivers/lightnvm/core.c | 48 ++++++++++++++++++++---------------------
>   1 file changed, 24 insertions(+), 24 deletions(-)
> 
> diff --git a/drivers/lightnvm/core.c b/drivers/lightnvm/core.c
> index a600934fdd9c..4c7b48f72e80 100644
> --- a/drivers/lightnvm/core.c
> +++ b/drivers/lightnvm/core.c
> @@ -4,6 +4,7 @@
>    * Initial release: Matias Bjorling <m@bjorling.me>
>    */
>   
> +#define pr_fmt(fmt) "nvm: " fmt
>   #include <linux/list.h>
>   #include <linux/types.h>
>   #include <linux/sem.h>
> @@ -74,7 +75,7 @@ static int nvm_reserve_luns(struct nvm_dev *dev, int lun_begin, int lun_end)
>   
>   	for (i = lun_begin; i <= lun_end; i++) {
>   		if (test_and_set_bit(i, dev->lun_map)) {
> -			pr_err("nvm: lun %d already allocated\n", i);
> +			pr_err("lun %d already allocated\n", i);
>   			goto err;
>   		}
>   	}
> @@ -264,7 +265,7 @@ static int nvm_config_check_luns(struct nvm_geo *geo, int lun_begin,
>   				 int lun_end)
>   {
>   	if (lun_begin > lun_end || lun_end >= geo->all_luns) {
> -		pr_err("nvm: lun out of bound (%u:%u > %u)\n",
> +		pr_err("lun out of bound (%u:%u > %u)\n",
>   			lun_begin, lun_end, geo->all_luns - 1);
>   		return -EINVAL;
>   	}
> @@ -297,7 +298,7 @@ static int __nvm_config_extended(struct nvm_dev *dev,
>   	if (e->op == 0xFFFF) {
>   		e->op = NVM_TARGET_DEFAULT_OP;
>   	} else if (e->op < NVM_TARGET_MIN_OP || e->op > NVM_TARGET_MAX_OP) {
> -		pr_err("nvm: invalid over provisioning value\n");
> +		pr_err("invalid over provisioning value\n");
>   		return -EINVAL;
>   	}
>   
> @@ -334,23 +335,23 @@ static int nvm_create_tgt(struct nvm_dev *dev, struct nvm_ioctl_create *create)
>   		e = create->conf.e;
>   		break;
>   	default:
> -		pr_err("nvm: config type not valid\n");
> +		pr_err("config type not valid\n");
>   		return -EINVAL;
>   	}
>   
>   	tt = nvm_find_target_type(create->tgttype);
>   	if (!tt) {
> -		pr_err("nvm: target type %s not found\n", create->tgttype);
> +		pr_err("target type %s not found\n", create->tgttype);
>   		return -EINVAL;
>   	}
>   
>   	if ((tt->flags & NVM_TGT_F_HOST_L2P) != (dev->geo.dom & NVM_RSP_L2P)) {
> -		pr_err("nvm: device is incompatible with target L2P type.\n");
> +		pr_err("device is incompatible with target L2P type.\n");
>   		return -EINVAL;
>   	}
>   
>   	if (nvm_target_exists(create->tgtname)) {
> -		pr_err("nvm: target name already exists (%s)\n",
> +		pr_err("target name already exists (%s)\n",
>   							create->tgtname);
>   		return -EINVAL;
>   	}
> @@ -367,7 +368,7 @@ static int nvm_create_tgt(struct nvm_dev *dev, struct nvm_ioctl_create *create)
>   
>   	tgt_dev = nvm_create_tgt_dev(dev, e.lun_begin, e.lun_end, e.op);
>   	if (!tgt_dev) {
> -		pr_err("nvm: could not create target device\n");
> +		pr_err("could not create target device\n");
>   		ret = -ENOMEM;
>   		goto err_t;
>   	}
> @@ -686,7 +687,7 @@ static int nvm_set_rqd_ppalist(struct nvm_tgt_dev *tgt_dev, struct nvm_rq *rqd,
>   	rqd->nr_ppas = nr_ppas;
>   	rqd->ppa_list = nvm_dev_dma_alloc(dev, GFP_KERNEL, &rqd->dma_ppa_list);
>   	if (!rqd->ppa_list) {
> -		pr_err("nvm: failed to allocate dma memory\n");
> +		pr_err("failed to allocate dma memory\n");
>   		return -ENOMEM;
>   	}
>   
> @@ -1048,7 +1049,7 @@ int nvm_set_chunk_meta(struct nvm_tgt_dev *tgt_dev, struct ppa_addr *ppas,
>   		return 0;
>   
>   	if (nr_ppas > NVM_MAX_VLBA) {
> -		pr_err("nvm: unable to update all blocks atomically\n");
> +		pr_err("unable to update all blocks atomically\n");
>   		return -EINVAL;
>   	}
>   
> @@ -1111,27 +1112,26 @@ static int nvm_init(struct nvm_dev *dev)
>   	int ret = -EINVAL;
>   
>   	if (dev->ops->identity(dev)) {
> -		pr_err("nvm: device could not be identified\n");
> +		pr_err("device could not be identified\n");
>   		goto err;
>   	}
>   
> -	pr_debug("nvm: ver:%u.%u nvm_vendor:%x\n",
> -				geo->major_ver_id, geo->minor_ver_id,
> -				geo->vmnt);
> +	pr_debug("ver:%u.%u nvm_vendor:%x\n", geo->major_ver_id,
> +			geo->minor_ver_id, geo->vmnt);
>   
>   	ret = nvm_core_init(dev);
>   	if (ret) {
> -		pr_err("nvm: could not initialize core structures.\n");
> +		pr_err("could not initialize core structures.\n");
>   		goto err;
>   	}
>   
> -	pr_info("nvm: registered %s [%u/%u/%u/%u/%u]\n",
> +	pr_info("registered %s [%u/%u/%u/%u/%u]\n",
>   			dev->name, dev->geo.ws_min, dev->geo.ws_opt,
>   			dev->geo.num_chk, dev->geo.all_luns,
>   			dev->geo.num_ch);
>   	return 0;
>   err:
> -	pr_err("nvm: failed to initialize nvm\n");
> +	pr_err("failed to initialize nvm\n");
>   	return ret;
>   }
>   
> @@ -1169,7 +1169,7 @@ int nvm_register(struct nvm_dev *dev)
>   	dev->dma_pool = dev->ops->create_dma_pool(dev, "ppalist",
>   						  exp_pool_size);
>   	if (!dev->dma_pool) {
> -		pr_err("nvm: could not create dma pool\n");
> +		pr_err("could not create dma pool\n");
>   		kref_put(&dev->ref, nvm_free);
>   		return -ENOMEM;
>   	}
> @@ -1214,7 +1214,7 @@ static int __nvm_configure_create(struct nvm_ioctl_create *create)
>   	up_write(&nvm_lock);
>   
>   	if (!dev) {
> -		pr_err("nvm: device not found\n");
> +		pr_err("device not found\n");
>   		return -EINVAL;
>   	}
>   
> @@ -1288,7 +1288,7 @@ static long nvm_ioctl_get_devices(struct file *file, void __user *arg)
>   		i++;
>   
>   		if (i > 31) {
> -			pr_err("nvm: max 31 devices can be reported.\n");
> +			pr_err("max 31 devices can be reported.\n");
>   			break;
>   		}
>   	}
> @@ -1315,7 +1315,7 @@ static long nvm_ioctl_dev_create(struct file *file, void __user *arg)
>   
>   	if (create.conf.type == NVM_CONFIG_TYPE_EXTENDED &&
>   	    create.conf.e.rsv != 0) {
> -		pr_err("nvm: reserved config field in use\n");
> +		pr_err("reserved config field in use\n");
>   		return -EINVAL;
>   	}
>   
> @@ -1331,7 +1331,7 @@ static long nvm_ioctl_dev_create(struct file *file, void __user *arg)
>   			flags &= ~NVM_TARGET_FACTORY;
>   
>   		if (flags) {
> -			pr_err("nvm: flag not supported\n");
> +			pr_err("flag not supported\n");
>   			return -EINVAL;
>   		}
>   	}
> @@ -1349,7 +1349,7 @@ static long nvm_ioctl_dev_remove(struct file *file, void __user *arg)
>   	remove.tgtname[DISK_NAME_LEN - 1] = '\0';
>   
>   	if (remove.flags != 0) {
> -		pr_err("nvm: no flags supported\n");
> +		pr_err("no flags supported\n");
>   		return -EINVAL;
>   	}
>   
> @@ -1365,7 +1365,7 @@ static long nvm_ioctl_dev_init(struct file *file, void __user *arg)
>   		return -EFAULT;
>   
>   	if (init.flags != 0) {
> -		pr_err("nvm: no flags supported\n");
> +		pr_err("no flags supported\n");
>   		return -EINVAL;
>   	}
>   
> 

Thanks Minwoo. Applied.

  reply	other threads:[~2019-08-11 19:43 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-07-27 18:26 [PATCH 0/2] lightnvm: minor updates for lightnvm core Minwoo Im
2019-07-27 18:26 ` [PATCH 1/2] lightnvm: introduce pr_fmt for the prefix nvm Minwoo Im
2019-08-11 19:43   ` Matias Bjørling [this message]
2019-07-27 18:26 ` [PATCH 2/2] lightnvm: print error when target is not found Minwoo Im

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=712c30cc-4b23-087c-39fa-b919ed0529da@lightnvm.io \
    --to=mb@lightnvm.io \
    --cc=Chaitanya.Kulkarni@wdc.com \
    --cc=javier@javigon.com \
    --cc=klaus@birkelund.eu \
    --cc=linux-block@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=minwoo.im.dev@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).