From: "Srivatsa S. Bhat" <srivatsa@csail.mit.edu>
To: Paolo Valente <paolo.valente@linaro.org>
Cc: linux-fsdevel@vger.kernel.org,
linux-block <linux-block@vger.kernel.org>,
linux-ext4@vger.kernel.org, cgroups@vger.kernel.org,
kernel list <linux-kernel@vger.kernel.org>,
Jens Axboe <axboe@kernel.dk>, Jan Kara <jack@suse.cz>,
jmoyer@redhat.com, Theodore Ts'o <tytso@mit.edu>,
amakhalov@vmware.com, anishs@vmware.com, srivatsab@vmware.com
Subject: Re: CFQ idling kills I/O performance on ext4 with blkio cgroup controller
Date: Thu, 23 May 2019 16:43:20 -0700 [thread overview]
Message-ID: <a04368ba-f1d5-8f2c-1279-a685a137d024@csail.mit.edu> (raw)
In-Reply-To: <2A58C239-EF3F-422B-8D87-E7A3B500C57C@linaro.org>
On 5/23/19 10:22 AM, Paolo Valente wrote:
>
>> Il giorno 23 mag 2019, alle ore 11:19, Paolo Valente <paolo.valente@linaro.org> ha scritto:
>>
>>> Il giorno 23 mag 2019, alle ore 04:30, Srivatsa S. Bhat <srivatsa@csail.mit.edu> ha scritto:
>>>
[...]
>>> Also, I'm very happy to run additional tests or experiments to help
>>> track down this issue. So, please don't hesitate to let me know if
>>> you'd like me to try anything else or get you additional traces etc. :)
>>>
>>
>> Here's to you! :) I've attached a new small improvement that may
>> reduce fluctuations (path to apply on top of the others, of course).
>> Unfortunately, I don't expect this change to boost the throughput
>> though.
>>
>> In contrast, I've thought of a solution that might be rather
>> effective: making BFQ aware (heuristically) of trivial
>> synchronizations between processes in different groups. This will
>> require a little more work and time.
>>
>
> Hi Srivatsa,
> I'm back :)
>
> First, there was a mistake in the last patch I sent you, namely in
> 0001-block-bfq-re-sample-req-service-times-when-possible.patch.
> Please don't apply that patch at all.
>
> I've attached a new series of patches instead. The first patch in this
> series is a fixed version of the faulty patch above (if I'm creating too
> much confusion, I'll send you again all patches to apply on top of
> mainline).
>
No problem, I got it :)
> This series also implements the more effective idea I told you a few
> hours ago. In my system, the loss is now around only 10%, even with
> low_latency on.
>
When trying to run multiple dd tasks simultaneously, I get the kernel
panic shown below (mainline is fine, without these patches).
[ 568.232231] BUG: kernel NULL pointer dereference, address: 0000000000000024
[ 568.232257] #PF: supervisor read access in kernel mode
[ 568.232273] #PF: error_code(0x0000) - not-present page
[ 568.232289] PGD 0 P4D 0
[ 568.232299] Oops: 0000 [#1] SMP PTI
[ 568.232312] CPU: 0 PID: 1029 Comm: dd Tainted: G E 5.1.0-io-dbg-4+ #6
[ 568.232334] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 04/05/2016
[ 568.232388] RIP: 0010:bfq_serv_to_charge+0x21/0x50
[ 568.232404] Code: ff e8 c3 5e bc ff 0f 1f 00 0f 1f 44 00 00 48 8b 86 20 01 00 00 55 48 89 e5 53 48 89 fb a8 40 75 09 83 be a0 01 00 00 01 76 09 <8b> 43 24 c1 e8 09 5b 5d c3 48 8b 7e 08 e8 5d fd ff ff 84 c0 75 ea
[ 568.232473] RSP: 0018:ffffa73a42dab750 EFLAGS: 00010002
[ 568.232489] RAX: 0000000000001052 RBX: 0000000000000000 RCX: ffffa73a42dab7a0
[ 568.232510] RDX: ffffa73a42dab657 RSI: ffff8b7b6ba2ab70 RDI: 0000000000000000
[ 568.232530] RBP: ffffa73a42dab758 R08: 0000000000000000 R09: 0000000000000001
[ 568.232551] R10: 0000000000000000 R11: ffffa73a42dab7a0 R12: ffff8b7b6aed3800
[ 568.232571] R13: 0000000000000000 R14: 0000000000000000 R15: ffff8b7b6aed3800
[ 568.232592] FS: 00007fb5b0724540(0000) GS:ffff8b7b6f800000(0000) knlGS:0000000000000000
[ 568.232615] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 568.232632] CR2: 0000000000000024 CR3: 00000004266be002 CR4: 00000000001606f0
[ 568.232690] Call Trace:
[ 568.232703] bfq_select_queue+0x781/0x1000
[ 568.232717] bfq_dispatch_request+0x1d7/0xd60
[ 568.232731] ? bfq_bfqq_handle_idle_busy_switch.isra.36+0x2cd/0xb20
[ 568.232751] blk_mq_do_dispatch_sched+0xa8/0xe0
[ 568.232765] blk_mq_sched_dispatch_requests+0xe3/0x150
[ 568.232783] __blk_mq_run_hw_queue+0x56/0x100
[ 568.232798] __blk_mq_delay_run_hw_queue+0x107/0x160
[ 568.232814] blk_mq_run_hw_queue+0x75/0x190
[ 568.232828] blk_mq_sched_insert_requests+0x7a/0x100
[ 568.232844] blk_mq_flush_plug_list+0x1d7/0x280
[ 568.232859] blk_flush_plug_list+0xc2/0xe0
[ 568.232872] blk_finish_plug+0x2c/0x40
[ 568.232886] ext4_writepages+0x592/0xe60
[ 568.233381] ? ext4_mark_iloc_dirty+0x52b/0x860
[ 568.233851] do_writepages+0x3c/0xd0
[ 568.234304] ? ext4_mark_inode_dirty+0x1a0/0x1a0
[ 568.234748] ? do_writepages+0x3c/0xd0
[ 568.235197] ? __generic_write_end+0x4e/0x80
[ 568.235644] __filemap_fdatawrite_range+0xa5/0xe0
[ 568.236089] ? __filemap_fdatawrite_range+0xa5/0xe0
[ 568.236533] ? ext4_da_write_end+0x13c/0x280
[ 568.236983] file_write_and_wait_range+0x5a/0xb0
[ 568.237407] ext4_sync_file+0x11e/0x3e0
[ 568.237819] vfs_fsync_range+0x48/0x80
[ 568.238217] ext4_file_write_iter+0x234/0x3d0
[ 568.238610] ? _cond_resched+0x19/0x40
[ 568.238982] new_sync_write+0x112/0x190
[ 568.239347] __vfs_write+0x29/0x40
[ 568.239705] vfs_write+0xb1/0x1a0
[ 568.240078] ksys_write+0x89/0xc0
[ 568.240428] __x64_sys_write+0x1a/0x20
[ 568.240771] do_syscall_64+0x5b/0x140
[ 568.241115] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 568.241456] RIP: 0033:0x7fb5b02325f4
[ 568.241787] Code: 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b3 0f 1f 80 00 00 00 00 48 8d 05 09 11 2d 00 8b 00 85 c0 75 13 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 f3 c3 66 90 41 54 55 49 89 d4 53 48 89 f5
[ 568.242842] RSP: 002b:00007ffcb12e2968 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
[ 568.243220] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fb5b02325f4
[ 568.243616] RDX: 0000000000000200 RSI: 000055698f2ad000 RDI: 0000000000000001
[ 568.244026] RBP: 0000000000000200 R08: 0000000000000004 R09: 0000000000000003
[ 568.244401] R10: 00007fb5b04feca0 R11: 0000000000000246 R12: 000055698f2ad000
[ 568.244775] R13: 0000000000000000 R14: 0000000000000000 R15: 000055698f2ad000
[ 568.245154] Modules linked in: xt_MASQUERADE(E) nf_conntrack_netlink(E) nfnetlink(E) xfrm_user(E) xfrm_algo(E) xt_addrtype(E) br_netfilter(E) bridge(E) stp(E) llc(E) overlay(E) vmw_vsock_vmci_transport(E) vsock(E) ip6table_filter(E) ip6_tables(E) xt_conntrack(E) iptable_mangle(E) iptable_nat(E) nf_nat(E) iptable_filter
[ 568.248651] CR2: 0000000000000024
[ 568.249142] ---[ end trace 0ddd315e0a5bdfba ]---
Regards,
Srivatsa
VMware Photon OS
next prev parent reply other threads:[~2019-05-23 23:43 UTC|newest]
Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-05-17 22:16 CFQ idling kills I/O performance on ext4 with blkio cgroup controller Srivatsa S. Bhat
2019-05-18 18:39 ` Paolo Valente
2019-05-18 19:28 ` Theodore Ts'o
2019-05-20 9:15 ` Jan Kara
2019-05-20 10:45 ` Paolo Valente
2019-05-21 16:48 ` Theodore Ts'o
2019-05-21 18:19 ` Josef Bacik
2019-05-21 19:10 ` Theodore Ts'o
2019-05-20 10:38 ` Paolo Valente
2019-05-21 7:38 ` Andrea Righi
2019-05-18 20:50 ` Srivatsa S. Bhat
2019-05-20 10:19 ` Paolo Valente
2019-05-20 22:45 ` Srivatsa S. Bhat
2019-05-21 6:23 ` Paolo Valente
2019-05-21 7:19 ` Srivatsa S. Bhat
2019-05-21 9:10 ` Jan Kara
2019-05-21 16:31 ` Theodore Ts'o
2019-05-21 11:25 ` Paolo Valente
2019-05-21 13:20 ` Paolo Valente
2019-05-21 16:21 ` Paolo Valente
2019-05-21 17:38 ` Paolo Valente
2019-05-21 22:51 ` Srivatsa S. Bhat
2019-05-22 8:05 ` Paolo Valente
2019-05-22 9:02 ` Srivatsa S. Bhat
2019-05-22 9:12 ` Paolo Valente
2019-05-22 10:02 ` Srivatsa S. Bhat
2019-05-22 9:09 ` Paolo Valente
2019-05-22 10:01 ` Srivatsa S. Bhat
2019-05-22 10:54 ` Paolo Valente
2019-05-23 2:30 ` Srivatsa S. Bhat
2019-05-23 9:19 ` Paolo Valente
2019-05-23 17:22 ` Paolo Valente
2019-05-23 23:43 ` Srivatsa S. Bhat [this message]
2019-05-24 6:51 ` Paolo Valente
2019-05-24 7:56 ` Paolo Valente
2019-05-29 1:09 ` Srivatsa S. Bhat
2019-05-29 7:41 ` Paolo Valente
2019-05-30 8:29 ` Srivatsa S. Bhat
2019-05-30 10:45 ` Paolo Valente
2019-06-02 7:04 ` Srivatsa S. Bhat
2019-06-11 22:34 ` Srivatsa S. Bhat
2019-06-12 13:04 ` Jan Kara
2019-06-12 19:36 ` Srivatsa S. Bhat
2019-06-13 6:02 ` Greg Kroah-Hartman
2019-06-13 19:03 ` Srivatsa S. Bhat
2019-06-13 8:20 ` Jan Kara
2019-06-13 19:05 ` Srivatsa S. Bhat
2019-06-13 8:37 ` Jens Axboe
2019-06-13 5:46 ` Paolo Valente
2019-06-13 19:13 ` Srivatsa S. Bhat
2019-05-23 23:32 ` Srivatsa S. Bhat
2019-05-30 8:38 ` Srivatsa S. Bhat
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=a04368ba-f1d5-8f2c-1279-a685a137d024@csail.mit.edu \
--to=srivatsa@csail.mit.edu \
--cc=amakhalov@vmware.com \
--cc=anishs@vmware.com \
--cc=axboe@kernel.dk \
--cc=cgroups@vger.kernel.org \
--cc=jack@suse.cz \
--cc=jmoyer@redhat.com \
--cc=linux-block@vger.kernel.org \
--cc=linux-ext4@vger.kernel.org \
--cc=linux-fsdevel@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=paolo.valente@linaro.org \
--cc=srivatsab@vmware.com \
--cc=tytso@mit.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).