linux-bluetooth.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Rocky Liao <rjliao@codeaurora.org>
To: marcel@holtmann.org, johan.hedberg@gmail.com
Cc: mka@chromium.org, linux-kernel@vger.kernel.org,
	linux-bluetooth@vger.kernel.org, linux-arm-msm@vger.kernel.org,
	bgodavar@codeaurora.org, Rocky Liao <rjliao@codeaurora.org>
Subject: [PATCH] Bluetooth: hci_qca: Load customized NVM based on the device property
Date: Thu,  4 Apr 2019 14:37:38 +0800	[thread overview]
Message-ID: <1554359858-21049-1-git-send-email-rjliao@codeaurora.org> (raw)

QCA BTSOC nvm is a customized file and different vendor/platoform may want
to have different BTSOC configuration via this file (e.g. Configure SCO over
PCM or I2S, Setting Tx power, etc.) This patch will allow vendors to download
different nvm file by reading a device property as the nvm file name postfix.

Signed-off-by: Rocky Liao <rjliao@codeaurora.org>
---
 drivers/bluetooth/btqca.c   | 13 +++++++++----
 drivers/bluetooth/btqca.h   |  4 ++--
 drivers/bluetooth/hci_qca.c | 18 +++++++++++++++++-
 3 files changed, 28 insertions(+), 7 deletions(-)

diff --git a/drivers/bluetooth/btqca.c b/drivers/bluetooth/btqca.c
index 6122685..81e42f3 100644
--- a/drivers/bluetooth/btqca.c
+++ b/drivers/bluetooth/btqca.c
@@ -332,7 +332,7 @@ int qca_set_bdaddr_rome(struct hci_dev *hdev, const bdaddr_t *bdaddr)
 EXPORT_SYMBOL_GPL(qca_set_bdaddr_rome);
 
 int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
-		   enum qca_btsoc_type soc_type, u32 soc_ver)
+		   enum qca_btsoc_type soc_type, u32 soc_ver, const char *nvm_postfix)
 {
 	struct rome_config config;
 	int err;
@@ -368,9 +368,14 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
 	if (soc_type == QCA_WCN3990)
 		snprintf(config.fwname, sizeof(config.fwname),
 			 "qca/crnv%02x.bin", rom_ver);
-	else
-		snprintf(config.fwname, sizeof(config.fwname),
-			 "qca/nvm_%08x.bin", soc_ver);
+	else {
+		if (NULL == nvm_postfix)
+			snprintf(config.fwname, sizeof(config.fwname),
+				 "qca/nvm_%08x.bin", soc_ver);
+		else
+			snprintf(config.fwname, sizeof(config.fwname),
+				 "qca/nvm_%08x_%s.bin", soc_ver, nvm_postfix);
+	}
 
 	err = qca_download_firmware(hdev, &config);
 	if (err < 0) {
diff --git a/drivers/bluetooth/btqca.h b/drivers/bluetooth/btqca.h
index 6fdc25d..60a868f 100644
--- a/drivers/bluetooth/btqca.h
+++ b/drivers/bluetooth/btqca.h
@@ -139,7 +139,7 @@ enum qca_btsoc_type {
 
 int qca_set_bdaddr_rome(struct hci_dev *hdev, const bdaddr_t *bdaddr);
 int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
-		   enum qca_btsoc_type soc_type, u32 soc_ver);
+		   enum qca_btsoc_type soc_type, u32 soc_ver, const char *nvm_postfix);
 int qca_read_soc_version(struct hci_dev *hdev, u32 *soc_version);
 int qca_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr);
 #else
@@ -150,7 +150,7 @@ static inline int qca_set_bdaddr_rome(struct hci_dev *hdev, const bdaddr_t *bdad
 }
 
 static inline int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
-				 enum qca_btsoc_type soc_type, u32 soc_ver)
+				 enum qca_btsoc_type soc_type, u32 soc_ver, const char *nvm_postfix)
 {
 	return -EOPNOTSUPP;
 }
diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
index 4ea995d..f495f3b 100644
--- a/drivers/bluetooth/hci_qca.c
+++ b/drivers/bluetooth/hci_qca.c
@@ -164,6 +164,7 @@ struct qca_serdev {
 	struct hci_uart	 serdev_hu;
 	struct gpio_desc *bt_en;
 	struct clk	 *susclk;
+	const char   *nvm_postfix;
 	enum qca_btsoc_type btsoc_type;
 	struct qca_power *bt_power;
 	u32 init_speed;
@@ -189,6 +190,17 @@ static enum qca_btsoc_type qca_soc_type(struct hci_uart *hu)
 	return soc_type;
 }
 
+static const char *qca_get_nvm_postfix(struct hci_uart *hu)
+{
+	if (hu->serdev) {
+		struct qca_serdev *qsd = serdev_device_get_drvdata(hu->serdev);
+
+		return qsd->nvm_postfix;
+	} else {
+		return NULL;
+	}
+}
+
 static void __serial_clock_on(struct tty_struct *tty)
 {
 	/* TODO: Some chipset requires to enable UART clock on client
@@ -1191,6 +1203,7 @@ static int qca_setup(struct hci_uart *hu)
 	struct qca_data *qca = hu->priv;
 	unsigned int speed, qca_baudrate = QCA_BAUDRATE_115200;
 	enum qca_btsoc_type soc_type = qca_soc_type(hu);
+	const char *nvm_postfix = qca_get_nvm_postfix(hu);
 	int ret;
 	int soc_ver = 0;
 
@@ -1241,7 +1254,7 @@ static int qca_setup(struct hci_uart *hu)
 
 	bt_dev_info(hdev, "QCA controller version 0x%08x", soc_ver);
 	/* Setup patch / NVM configurations */
-	ret = qca_uart_setup(hdev, qca_baudrate, soc_type, soc_ver);
+	ret = qca_uart_setup(hdev, qca_baudrate, soc_type, soc_ver, nvm_postfix);
 	if (!ret) {
 		set_bit(STATE_IN_BAND_SLEEP_ENABLED, &qca->flags);
 		qca_debugfs_init(hdev);
@@ -1462,6 +1475,9 @@ static int qca_serdev_probe(struct serdev_device *serdev)
 			return PTR_ERR(qcadev->bt_en);
 		}
 
+		device_property_read_string(&serdev->dev, "nvm-postfix",
+					 &qcadev->nvm_postfix);
+
 		qcadev->susclk = devm_clk_get(&serdev->dev, NULL);
 		if (IS_ERR(qcadev->susclk)) {
 			dev_err(&serdev->dev, "failed to acquire clk\n");
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project


             reply	other threads:[~2019-04-04  6:38 UTC|newest]

Thread overview: 34+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-04-04  6:37 Rocky Liao [this message]
2019-04-04  6:56 ` [PATCH] Bluetooth: hci_qca: Load customized NVM based on the device property Balakrishna Godavarthi
2019-04-04  9:08 ` [PATCH v2 1/2] " Rocky Liao
2019-04-04  9:08   ` [PATCH v2 2/2] dt-bindings: net: bluetooth: Add device property nvm-postfix for QCA6174 Rocky Liao
2019-04-04 12:32     ` Marc Gonzalez
2019-04-09 10:15       ` Rocky Liao
2019-04-09 14:03         ` Rob Herring
2019-04-09 14:48           ` Rocky Liao
2019-04-09 13:54       ` Rob Herring
2019-04-10  9:27     ` [PATCH v3 2/2] dt-bindings: net: bluetooth: Add device property firmware-name " Rocky Liao
2019-04-23 17:06       ` Marcel Holtmann
2019-04-24  6:19         ` Rocky Liao
2019-04-26 17:45           ` Rob Herring
2019-04-27  5:59             ` Marcel Holtmann
2019-05-03  7:56               ` Rocky Liao
2019-05-05 17:32                 ` Marcel Holtmann
2019-04-26 20:50       ` Rob Herring
2019-05-12  3:19       ` [PATCH v4 " Rocky Liao
2019-05-13 15:31         ` Rob Herring
2019-05-15 11:20         ` [PATCH v5 " Rocky Liao
2019-06-06  9:40           ` [PATCH v6 " Rocky Liao
2019-06-11 22:01             ` Rob Herring
2019-07-06 10:56             ` Marcel Holtmann
2019-04-04  9:59   ` [PATCH v2 1/2] Bluetooth: hci_qca: Load customized NVM based on the device property Balakrishna Godavarthi
2019-04-10  9:27   ` [PATCH v3 " Rocky Liao
2019-05-12  3:19     ` [PATCH v4 " Rocky Liao
2019-05-15  5:32       ` Balakrishna Godavarthi
2019-05-15  8:30         ` Rocky Liao
2019-05-15 11:19       ` [PATCH v5 " Rocky Liao
2019-05-17  2:43         ` Balakrishna Godavarthi
2019-05-17  4:26           ` Harish Bandi
2019-06-06  9:40         ` [PATCH v6 " Rocky Liao
2019-06-06 12:02           ` Harish Bandi
2019-07-06 10:51           ` Marcel Holtmann

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1554359858-21049-1-git-send-email-rjliao@codeaurora.org \
    --to=rjliao@codeaurora.org \
    --cc=bgodavar@codeaurora.org \
    --cc=johan.hedberg@gmail.com \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-bluetooth@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=marcel@holtmann.org \
    --cc=mka@chromium.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).