From: Manuel Reimer <mail@m-reimer.de>
To: Marcel Holtmann <marcel@holtmann.org>
Cc: linux-bluetooth@vger.kernel.org
Subject: Re: Problems with Bluetooth built into BCM4313 WLAN card
Date: Sat, 20 Oct 2018 11:29:17 +0200 (CEST) [thread overview]
Message-ID: <1843143565.101877.1540027757763@office.mailbox.org> (raw)
In-Reply-To: <1681973667.42596.1539676137500@office.mailbox.org>
Hello,
My new WLAN mini PCI card has arrived and is installed into my laptop.
I hope this at least fixes the unstable WLAN but unfortunately Bluetooth keeps absent.
While searching, I've found something that may be interesting:
Oct 20 11:08:07 manuelslaptop kernel: usb 1-1.3: Product: Bluetooth USB Host Controller
Oct 20 11:08:07 manuelslaptop kernel: usb 1-1.3: Manufacturer: Atheros Communications
Oct 20 11:08:07 manuelslaptop kernel: usb 1-1.3: SerialNumber: Alaska Day 2006
...
Oct 20 11:08:07 manuelslaptop kernel: usb 1-1.3: USB disconnect, device number 3
So yes, on this card the bluetooth controller is connected via USB. I just cant see it in lsusb as it, for some reason, disconnects itself. I have no idea what is causing this...
Maybe I should just stick with my USB dongle. Linux and MiniPCI Bluetooth doesn't seem to be a good combination.
Manuel
> mail+bluetooth@m-reimer.de hat am 16. Oktober 2018 um 09:48 geschrieben:
>
>
> Hello,
>
> my acpidump output doesn't seem to have anything about "bluetooth" and I even don't see anything about my BCM4313 card.
>
> About the Wifi chipset, I think it should be Broadcom (BCM4313)
>
> I've tried to load the "thinkpad-acpi" module, but sadly it doesn't detect my ideapad laptop. No way to configure Bluetooth there. I also don't have bluetooth in the BIOS setup to enable it there.
>
> If I'm right, then ACPI/BIOS can somehow block Bluetooth and so even if I get my new card, Bluetooth could still be disabled?
>
> Is there any other way to enable Bluetooth besides booting Windows on this machine to do it there?
>
> Manuel
>
> > Marcel Holtmann <marcel@holtmann.org> hat am 15. Oktober 2018 um 19:25 geschrieben:
> >
> >
> > Hi Manuel,
> >
> > > I've tried with unblocked bluetooth but don't get anyting in lsusb:
> > >
> > > # rfkill list
> > > 0: ideapad_wlan: Wireless LAN
> > > Soft blocked: no
> > > Hard blocked: no
> > > 1: ideapad_bluetooth: Bluetooth
> > > Soft blocked: no
> > > Hard blocked: no
> > > 3: phy0: Wireless LAN
> > > Soft blocked: no
> > > Hard blocked: no
> > > [root@manuelslaptop ~]# lsusb
> > > Bus 002 Device 003: ID 04f2:b2e2 Chicony Electronics Co., Ltd
> > > Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
> > > Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
> > > Bus 001 Device 004: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller
> > > Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
> > > Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
> > > Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
> > > Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
> > >
> > >
> > > The WLAN part is also not the greatest (open source driver).
> > >
> > > I've ordered a new card with Atheros chipset some days ago and will try if this solves this issue.
> >
> > Then use acpidump etc to look at your ACPI tables and see if a Bluetooth UART device is described there. There is sadly no simple lsacpi to list your devices.
> >
> > What is the WiFi chipset anyway? Is this Realtek based or what?
> >
> > Regards
> >
> > Marcel
> >
next prev parent reply other threads:[~2018-10-20 9:29 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-08 14:34 Problems with Bluetooth built into BCM4313 WLAN card mail+bluetooth
2018-10-14 8:30 ` Marcel Holtmann
2018-10-15 16:00 ` mail+bluetooth
2018-10-15 17:25 ` Marcel Holtmann
2018-10-16 7:48 ` mail+bluetooth
2018-10-20 9:29 ` Manuel Reimer [this message]
2018-10-20 9:37 ` Manuel Reimer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1843143565.101877.1540027757763@office.mailbox.org \
--to=mail@m-reimer.de \
--cc=linux-bluetooth@vger.kernel.org \
--cc=marcel@holtmann.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).