From: Matthias Kaehlcke <mka@chromium.org>
To: Balakrishna Godavarthi <bgodavar@codeaurora.org>
Cc: marcel@holtmann.org, johan.hedberg@gmail.com, johan@kernel.org,
linux-kernel@vger.kernel.org, linux-bluetooth@vger.kernel.org,
hemantg@codeaurora.org, linux-arm-msm@vger.kernel.org
Subject: Re: [PATCH v9 3/3] Bluetooth: hci_qca: Disable IBS state machine and flush Tx buffer
Date: Fri, 1 Feb 2019 10:35:06 -0800 [thread overview]
Message-ID: <20190201183506.GR81583@google.com> (raw)
In-Reply-To: <75923da910c43e7e5e033f4ff4360a90@codeaurora.org>
On Fri, Feb 01, 2019 at 05:10:11PM +0530, Balakrishna Godavarthi wrote:
> Hi Matthias,
>
> On 2019-01-25 06:25, Matthias Kaehlcke wrote:
> > On Thu, Jan 24, 2019 at 05:38:08PM +0530, Balakrishna Godavarthi wrote:
> > > During hci down we observed IBS sleep commands are queued in the Tx
> > > buffer and hci_uart_write_work is sending data to the chip which is
> > > not required as the chip is powered off. This patch will disable IBS
> > > and flush the Tx buffer before we turn off the chip.
> > >
> > > Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org>
> > > ---
> > > Changes v9:
> > > * added lock while disabling the IBS state machine.
> > >
> > > ---
> > > drivers/bluetooth/hci_qca.c | 17 +++++++++++++++--
> > > 1 file changed, 15 insertions(+), 2 deletions(-)
> > >
> > > diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
> > > index 6b5bcd44e24c..99ddc35f08c6 100644
> > > --- a/drivers/bluetooth/hci_qca.c
> > > +++ b/drivers/bluetooth/hci_qca.c
> > > @@ -771,16 +771,17 @@ static int qca_enqueue(struct hci_uart *hu,
> > > struct sk_buff *skb)
> > > /* Prepend skb with frame type */
> > > memcpy(skb_push(skb, 1), &hci_skb_pkt_type(skb), 1);
> > >
> > > + spin_lock_irqsave(&qca->hci_ibs_lock, flags);
> > > +
> > > /* Don't go to sleep in middle of patch download or
> > > * Out-Of-Band(GPIOs control) sleep is selected.
> > > */
> > > if (!test_bit(STATE_IN_BAND_SLEEP_ENABLED, &qca->flags)) {
> > > skb_queue_tail(&qca->txq, skb);
> > > + spin_unlock_irqrestore(&qca->hci_ibs_lock, flags);
> > > return 0;
> > > }
> > >
> > > - spin_lock_irqsave(&qca->hci_ibs_lock, flags);
> > > -
> > > /* Act according to current state */
> > > switch (qca->tx_ibs_state) {
> > > case HCI_IBS_TX_AWAKE:
> > > @@ -1273,6 +1274,18 @@ static const struct qca_vreg_data
> > > qca_soc_data = {
> > >
> > > static void qca_power_shutdown(struct hci_uart *hu)
> > > {
> > > + struct qca_data *qca = hu->priv;
> > > + unsigned long flags;
> > > +
> > > + /* From this point we go into power off state. But serial port is
> > > + * still open, stop queueing the IBS data and flush all the buffered
> > > + * data in skb's.
> > > + */
> > > + spin_lock_irqsave(&qca->hci_ibs_lock, flags);
> > > + clear_bit(STATE_IN_BAND_SLEEP_ENABLED, &qca->flags);
> > > + qca_flush(hu);
> > > + spin_unlock_irqrestore(&qca->hci_ibs_lock, flags);
> > > +
> > > host_set_baudrate(hu, 2400);
> > > qca_send_power_pulse(hu, QCA_WCN3990_POWEROFF_PULSE);
> > > qca_power_setup(hu, false);
> >
> > I was about to add my 'Reviewed-by' tag, but I'm still left with a
> > doubt. This patch certainly improves the situation by clearing the IBS
> > bit and flushing the buffered data, however IIUC new data could still
> > be added to the TX queue after releasing the spinlock:
> >
> > static int qca_enqueue(struct hci_uart *hu, struct sk_buff *skb)
> > {
> > ...
> >
> > if (!test_bit(STATE_IN_BAND_SLEEP_ENABLED, &qca->flags)) {
> > skb_queue_tail(&qca->txq, skb);
> >
> > ...
> > }
> >
> > To prevent this a boolean/bit like 'shutting_down' or similar would be
> > needed (I don't think there is something common in the HCI core),
> > which is set in qca_power_shutdown(). If the bit is set qca_enqueue()
> > discards the data.
> >
> > Not sure how important this is, and I don't want to add necessarily
> > more revisions to this series. If it is preferable to have an empty
> > queue after shutdown maybe it can be done in a follow up patch.
> >
> > Thanks
> >
> > Matthias
>
> [Bala]: during shutdown Bt stack will not send any data to the Bt kernel Tx
> path.
> so this call may not be called. once we shutdown chip.
Thanks for the clarification! I kinda expected that, but it wasn't
evident to me from the core code.
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
prev parent reply other threads:[~2019-02-01 18:35 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-24 12:08 [PATCH v9 0/3] Bug fixes for Qualcomm BT chip wcn3990 Balakrishna Godavarthi
2019-01-24 12:08 ` [PATCH v9 1/3] Bluetooth: hci_qca: use wait_until_sent() for power pulses Balakrishna Godavarthi
2019-01-25 1:14 ` Matthias Kaehlcke
2019-01-28 13:49 ` Balakrishna Godavarthi
2019-01-28 17:47 ` Matthias Kaehlcke
2019-01-29 13:08 ` Balakrishna Godavarthi
2019-01-24 12:08 ` [PATCH v9 2/3] Bluetooth: hci_qca: Deassert RTS while baudrate change command Balakrishna Godavarthi
2019-01-25 0:12 ` Matthias Kaehlcke
2019-01-28 13:45 ` Balakrishna Godavarthi
2019-01-24 12:08 ` [PATCH v9 3/3] Bluetooth: hci_qca: Disable IBS state machine and flush Tx buffer Balakrishna Godavarthi
2019-01-25 0:55 ` Matthias Kaehlcke
2019-02-01 11:40 ` Balakrishna Godavarthi
2019-02-01 18:35 ` Matthias Kaehlcke [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190201183506.GR81583@google.com \
--to=mka@chromium.org \
--cc=bgodavar@codeaurora.org \
--cc=hemantg@codeaurora.org \
--cc=johan.hedberg@gmail.com \
--cc=johan@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-bluetooth@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marcel@holtmann.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).