This is automated email and please do not reply to this email! Dear submitter, Thank you for submitting the patches to the linux bluetooth mailing list. This is a CI test results with your patch series: PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=519479 ---Test result--- Test Summary: CheckPatch FAIL 1.86 seconds GitLint FAIL 0.84 seconds Prep - Setup ELL PASS 47.00 seconds Build - Prep PASS 0.10 seconds Build - Configure PASS 8.33 seconds Build - Make PASS 203.42 seconds Make Check PASS 9.65 seconds Make Distcheck PASS 241.66 seconds Build w/ext ELL - Configure PASS 8.32 seconds Build w/ext ELL - Make PASS 191.62 seconds Details ############################## Test: CheckPatch - FAIL Desc: Run checkpatch.pl script with rule in .checkpatch.conf Output: adapter: Add support for get/set phy configuration property WARNING:LONG_LINE_STRING: line length of 82 exceeds 80 columns #103: FILE: src/adapter.c:3323: + g_dbus_pending_property_error(data->id, ERROR_INTERFACE ".Failed", WARNING:LONG_LINE: line length of 83 exceeds 80 columns #145: FILE: src/adapter.c:3365: + unconfigure_phys = adapter->supported_phys & ~(adapter->configurable_phys); WARNING:LONG_LINE: line length of 83 exceeds 80 columns #171: FILE: src/adapter.c:3391: + DBG("sending set phy configuration command for index %u", adapter->dev_id); WARNING:LONG_LINE_STRING: line length of 82 exceeds 80 columns #181: FILE: src/adapter.c:3401: + btd_error(adapter->dev_id, "Failed to set PHY configuration for index %u", ERROR:SPACING: need consistent spacing around '*' (ctx:WxV) #189: FILE: src/adapter.c:3409: + const GDBusPropertyTable *property, ^ ERROR:SPACING: need consistent spacing around '*' (ctx:WxV) #205: FILE: src/adapter.c:3425: + const GDBusPropertyTable *property, ^ - total: 2 errors, 4 warnings, 312 lines checked NOTE: For some of the reported defects, checkpatch may be able to mechanically convert to the typical style using --fix or --fix-inplace. "[PATCH] adapter: Add support for get/set phy configuration property" has style problems, please review. NOTE: Ignored message types: COMMIT_MESSAGE COMPLEX_MACRO CONST_STRUCT FILE_PATH_CHANGES MISSING_SIGN_OFF PREFER_PACKED SPDX_LICENSE_TAG SPLIT_STRING SSCANF_TO_KSTRTO NOTE: If any of the errors are false positives, please report them to the maintainer, see CHECKPATCH in MAINTAINERS. adapter: Add support for the get supported phy property ERROR:SPACING: need consistent spacing around '*' (ctx:WxV) #20: FILE: src/adapter.c:3409: + const GDBusPropertyTable *property, ^ - total: 1 errors, 0 warnings, 30 lines checked NOTE: For some of the reported defects, checkpatch may be able to mechanically convert to the typical style using --fix or --fix-inplace. "[PATCH] adapter: Add support for the get supported phy property" has style problems, please review. NOTE: Ignored message types: COMMIT_MESSAGE COMPLEX_MACRO CONST_STRUCT FILE_PATH_CHANGES MISSING_SIGN_OFF PREFER_PACKED SPDX_LICENSE_TAG SPLIT_STRING SSCANF_TO_KSTRTO NOTE: If any of the errors are false positives, please report them to the maintainer, see CHECKPATCH in MAINTAINERS. adapter: Add support for PHY Configuration Changed event WARNING:LONG_LINE: line length of 83 exceeds 80 columns #52: FILE: src/adapter.c:9944: + phy_configuration_changed_callback, - total: 0 errors, 1 warnings, 39 lines checked NOTE: For some of the reported defects, checkpatch may be able to mechanically convert to the typical style using --fix or --fix-inplace. "[PATCH] adapter: Add support for PHY Configuration Changed event" has style problems, please review. NOTE: Ignored message types: COMMIT_MESSAGE COMPLEX_MACRO CONST_STRUCT FILE_PATH_CHANGES MISSING_SIGN_OFF PREFER_PACKED SPDX_LICENSE_TAG SPLIT_STRING SSCANF_TO_KSTRTO NOTE: If any of the errors are false positives, please report them to the maintainer, see CHECKPATCH in MAINTAINERS. client: Add support for get/set PHY configuration in bluetoothctl WARNING:LONG_LINE_STRING: line length of 87 exceeds 80 columns #65: FILE: client/main.c:2046: + "SupportedPhyConfiguration", "Supported phys"); WARNING:LONG_LINE: line length of 83 exceeds 80 columns #86: FILE: client/main.c:2067: + "PhyConfiguration", DBUS_TYPE_STRING, phys, WARNING:LONG_LINE_STRING: line length of 88 exceeds 80 columns #87: FILE: client/main.c:2068: + phys_len, generic_callback, "PHY Configuration", - total: 0 errors, 3 warnings, 57 lines checked NOTE: For some of the reported defects, checkpatch may be able to mechanically convert to the typical style using --fix or --fix-inplace. "[PATCH] client: Add support for get/set PHY configuration in" has style problems, please review. NOTE: Ignored message types: COMMIT_MESSAGE COMPLEX_MACRO CONST_STRUCT FILE_PATH_CHANGES MISSING_SIGN_OFF PREFER_PACKED SPDX_LICENSE_TAG SPLIT_STRING SSCANF_TO_KSTRTO NOTE: If any of the errors are false positives, please report them to the maintainer, see CHECKPATCH in MAINTAINERS. ############################## Test: GitLint - FAIL Desc: Run gitlint with rule in .gitlint Output: client: Add support for get/set PHY configuration in bluetoothctl 18: B3 Line contains hard tab characters (\t): " Supported phys: BR1M1SLOT" 19: B3 Line contains hard tab characters (\t): " Supported phys: BR1M3SLOT" 20: B3 Line contains hard tab characters (\t): " Supported phys: BR1M5SLOT" 21: B3 Line contains hard tab characters (\t): " Supported phys: EDR2M1SLOT" 22: B3 Line contains hard tab characters (\t): " Supported phys: EDR2M3SLOT" 23: B3 Line contains hard tab characters (\t): " Supported phys: EDR2M5SLOT" 24: B3 Line contains hard tab characters (\t): " Supported phys: EDR3M1SLOT" 25: B3 Line contains hard tab characters (\t): " Supported phys: EDR3M3SLOT" 26: B3 Line contains hard tab characters (\t): " Supported phys: EDR3M5SLOT" 27: B3 Line contains hard tab characters (\t): " Supported phys: LE1MTX" 28: B3 Line contains hard tab characters (\t): " Supported phys: LE1MRX" 29: B3 Line contains hard tab characters (\t): " Selected phys: BR1M1SLOT" 30: B3 Line contains hard tab characters (\t): " Selected phys: LE1MTX" 31: B3 Line contains hard tab characters (\t): " Selected phys: LE1MRX" ############################## Test: Prep - Setup ELL - PASS Desc: Clone, build, and install ELL ############################## Test: Build - Prep - PASS Desc: Prepare environment for build ############################## Test: Build - Configure - PASS Desc: Configure the BlueZ source tree ############################## Test: Build - Make - PASS Desc: Build the BlueZ source tree ############################## Test: Make Check - PASS Desc: Run 'make check' ############################## Test: Make Distcheck - PASS Desc: Run distcheck to check the distribution ############################## Test: Build w/ext ELL - Configure - PASS Desc: Configure BlueZ source with '--enable-external-ell' configuration ############################## Test: Build w/ext ELL - Make - PASS Desc: Build BlueZ source with '--enable-external-ell' configuration --- Regards, Linux Bluetooth