From: "K, Kiran" <kiran.k@intel.com>
To: Luiz Augusto von Dentz <luiz.dentz@gmail.com>
Cc: "linux-bluetooth@vger.kernel.org"
<linux-bluetooth@vger.kernel.org>,
"Srivatsa, Ravishankar" <ravishankar.srivatsa@intel.com>,
"Tumkur Narayan, Chethan" <chethan.tumkur.narayan@intel.com>
Subject: RE: [PATCH v11 08/10] Bluetooth: Add support for HCI_Enhanced_Setup_Synchronous_Connection command
Date: Sat, 14 Aug 2021 06:41:50 +0000 [thread overview]
Message-ID: <DM8PR11MB5573975AAEBABB19041C8CD8F5FB9@DM8PR11MB5573.namprd11.prod.outlook.com> (raw)
In-Reply-To: <CABBYNZ+QKbwHd+XPNQ-3c+dF1wQzHTLVWncq4ctqk_yBTM5P9Q@mail.gmail.com>
Hi Luiz,
> -----Original Message-----
> From: Luiz Augusto von Dentz <luiz.dentz@gmail.com>
> Sent: Wednesday, July 28, 2021 9:30 AM
> To: K, Kiran <kiran.k@intel.com>
> Cc: linux-bluetooth@vger.kernel.org; Srivatsa, Ravishankar
> <ravishankar.srivatsa@intel.com>; Tumkur Narayan, Chethan
> <chethan.tumkur.narayan@intel.com>
> Subject: Re: [PATCH v11 08/10] Bluetooth: Add support for
> HCI_Enhanced_Setup_Synchronous_Connection command
>
> Hi Kiran,
>
> On Tue, Jul 27, 2021 at 1:45 AM Kiran K <kiran.k@intel.com> wrote:
> >
> > < HCI Command: Enhanced Setup Synchronous Connection (0x01|0x003d)
> plen 59
> > Handle: 256
> > Transmit bandwidth: 8000
> > Receive bandwidth: 8000
> > Max latency: 13
> > Packet type: 0x0380
> > 3-EV3 may not be used
> > 2-EV5 may not be used
> > 3-EV5 may not be used
> > Retransmission effort: Optimize for link quality (0x02)
> > > HCI Event: Command Status (0x0f) plen 4
> > Enhanced Setup Synchronous Connection (0x01|0x003d) ncmd 1
> > Status: Success (0x00)
> > > HCI Event: Synchronous Connect Complete (0x2c) plen 17
> > Status: Success (0x00)
> > Handle: 257
> > Address: CC:98:8B:92:04:FD (SONY Visual Products Inc.)
> > Link type: eSCO (0x02)
> > Transmission interval: 0x0c
> > Retransmission window: 0x06
> > RX packet length: 60
> > TX packet length: 60
> > Air mode: Transparent (0x03)
> >
> > Signed-off-by: Kiran K <kiran.k@intel.com>
> > Reviewed-by: Chethan T N <chethan.tumkur.narayan@intel.com>
> > Reviewed-by: Srivatsa Ravishankar <ravishankar.srivatsa@intel.com>
> > ---
> > * changes in v11:
> > - Remove changes related to Kconfig
> > - s/use_enhanced_sco_conn/enhanced_sco_capable/g
> > - Minor review comments
> >
> > * changes in v10:
> > - Fix typos and remove unwanted chunks
> > * changes in v9:
> > - Fix review comments, use bt_dev_dbg instead of BT_DBG
> >
> > include/net/bluetooth/bluetooth.h | 3 +-
> > include/net/bluetooth/hci.h | 34 ++++++++++
> > include/net/bluetooth/hci_core.h | 6 +-
> > net/bluetooth/hci_conn.c | 105 +++++++++++++++++++++++++++++-
> > net/bluetooth/hci_event.c | 39 +++++++++++
> > net/bluetooth/sco.c | 11 +++-
> > 6 files changed, 192 insertions(+), 6 deletions(-)
> >
> > diff --git a/include/net/bluetooth/bluetooth.h
> > b/include/net/bluetooth/bluetooth.h
> > index 1a48b6732eef..f2df8bb108d9 100644
> > --- a/include/net/bluetooth/bluetooth.h
> > +++ b/include/net/bluetooth/bluetooth.h
> > @@ -173,7 +173,8 @@ struct bt_codecs {
> > struct bt_codec codecs[];
> > } __packed;
> >
> > -#define CODING_FORMAT_CVSD 0x02
> > +#define CODING_FORMAT_CVSD 0x02
> > +#define CODING_FORMAT_TRANSPARENT 0x03
> >
> > __printf(1, 2)
> > void bt_info(const char *fmt, ...);
> > diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h
> > index c998607fc517..8af8892e18bc 100644
> > --- a/include/net/bluetooth/hci.h
> > +++ b/include/net/bluetooth/hci.h
> > @@ -871,6 +871,40 @@ struct hci_cp_logical_link_cancel {
> > __u8 flow_spec_id;
> > } __packed;
> >
> > +#define HCI_OP_ENHANCED_SETUP_SYNC_CONN 0x043d
> > +struct hci_coding_format {
> > + __u8 id;
> > + __le16 cid;
> > + __le16 vid;
> > +} __packed;
> > +
> > +struct hci_cp_enhanced_setup_sync_conn {
> > + __le16 handle;
> > + __le32 tx_bandwidth;
> > + __le32 rx_bandwidth;
> > + struct hci_coding_format tx_coding_format;
> > + struct hci_coding_format rx_coding_format;
> > + __le16 tx_codec_frame_size;
> > + __le16 rx_codec_frame_size;
> > + __le32 in_bandwidth;
> > + __le32 out_bandwidth;
> > + struct hci_coding_format in_coding_format;
> > + struct hci_coding_format out_coding_format;
> > + __le16 in_coded_data_size;
> > + __le16 out_coded_data_size;
> > + __u8 in_pcm_data_format;
> > + __u8 out_pcm_data_format;
> > + __u8 in_pcm_sample_payload_msb_pos;
> > + __u8 out_pcm_sample_payload_msb_pos;
> > + __u8 in_data_path;
> > + __u8 out_data_path;
> > + __u8 in_transport_unit_size;
> > + __u8 out_transport_unit_size;
> > + __le16 max_latency;
> > + __le16 pkt_type;
> > + __u8 retrans_effort;
> > +} __packed;
> > +
> > struct hci_rp_logical_link_cancel {
> > __u8 status;
> > __u8 phy_handle;
> > diff --git a/include/net/bluetooth/hci_core.h
> > b/include/net/bluetooth/hci_core.h
> > index eafa6f8114cb..4c310bd3e1c6 100644
> > --- a/include/net/bluetooth/hci_core.h
> > +++ b/include/net/bluetooth/hci_core.h
> > @@ -713,6 +713,7 @@ struct hci_conn {
> > struct amp_mgr *amp_mgr;
> >
> > struct hci_conn *link;
> > + struct bt_codec codec;
> >
> > void (*connect_cfm_cb) (struct hci_conn *conn, u8 status);
> > void (*security_cfm_cb) (struct hci_conn *conn, u8 status); @@
> > -1119,7 +1120,7 @@ struct hci_conn *hci_connect_acl(struct hci_dev
> *hdev, bdaddr_t *dst,
> > u8 sec_level, u8 auth_type,
> > enum conn_reasons conn_reason);
> > struct hci_conn *hci_connect_sco(struct hci_dev *hdev, int type, bdaddr_t
> *dst,
> > - __u16 setting);
> > + __u16 setting, struct bt_codec
> > + *codec);
> > int hci_conn_check_link_mode(struct hci_conn *conn); int
> > hci_conn_check_secure(struct hci_conn *conn, __u8 sec_level); int
> > hci_conn_security(struct hci_conn *conn, __u8 sec_level, __u8
> > auth_type, @@ -1440,6 +1441,9 @@ void hci_conn_del_sysfs(struct
> > hci_conn *conn);
> > /* Use LL Privacy based address resolution if supported */ #define
> > use_ll_privacy(dev) ((dev)->le_features[0] & HCI_LE_LL_PRIVACY)
> >
> > +/* Use enhanced synchronous connection if command is supported */
> > +#define enhanced_sco_capable(dev) ((dev)->commands[29] & 0x08)
> > +
> > /* Use ext scanning if set ext scan param and ext scan enable is
> > supported */ #define use_ext_scan(dev) (((dev)->commands[37] & 0x20)
> && \
> > ((dev)->commands[37] & 0x40)) diff --git
> > a/net/bluetooth/hci_conn.c b/net/bluetooth/hci_conn.c index
> > 2b5059a56cda..48943b01a356 100644
> > --- a/net/bluetooth/hci_conn.c
> > +++ b/net/bluetooth/hci_conn.c
> > @@ -307,13 +307,103 @@ static bool find_next_esco_param(struct
> hci_conn *conn,
> > return conn->attempt <= size;
> > }
> >
> > -bool hci_setup_sync(struct hci_conn *conn, __u16 handle)
> > +static bool hci_enhanced_setup_sync_conn(struct hci_conn *conn, __u16
> > +handle) {
> > + struct hci_dev *hdev = conn->hdev;
> > + struct hci_cp_enhanced_setup_sync_conn cp;
> > + const struct sco_param *param;
> > +
> > + bt_dev_dbg(hdev, "hcon %p", conn);
> > +
> > + conn->state = BT_CONNECT;
> > + conn->out = true;
> > +
> > + conn->attempt++;
> > +
> > + memset(&cp, 0x00, sizeof(cp));
> > +
> > + cp.handle = cpu_to_le16(handle);
> > +
> > + cp.tx_bandwidth = cpu_to_le32(0x00001f40);
> > + cp.rx_bandwidth = cpu_to_le32(0x00001f40);
> > +
> > + switch (conn->codec.id) {
> > + case CODING_FORMAT_TRANSPARENT:
> > + if (!find_next_esco_param(conn, esco_param_msbc,
> > + ARRAY_SIZE(esco_param_msbc)))
> > + return false;
> > + param = &esco_param_msbc[conn->attempt - 1];
> > + cp.tx_coding_format.id = 0x03;
> > + cp.rx_coding_format.id = 0x03;
> > + cp.tx_codec_frame_size = __cpu_to_le16(60);
> > + cp.rx_codec_frame_size = __cpu_to_le16(60);
> > + cp.in_bandwidth = __cpu_to_le32(0x1f40);
> > + cp.out_bandwidth = __cpu_to_le32(0x1f40);
> > + cp.in_coding_format.id = 0x03;
> > + cp.out_coding_format.id = 0x03;
> > + cp.in_coded_data_size = __cpu_to_le16(16);
> > + cp.out_coded_data_size = __cpu_to_le16(16);
> > + cp.in_pcm_data_format = 2;
> > + cp.out_pcm_data_format = 2;
> > + cp.in_pcm_sample_payload_msb_pos = 0;
> > + cp.out_pcm_sample_payload_msb_pos = 0;
> > + cp.in_data_path = conn->codec.data_path;
> > + cp.out_data_path = conn->codec.data_path;
> > + cp.in_transport_unit_size = 1;
> > + cp.out_transport_unit_size = 1;
> > + break;
> > +
> > + case CODING_FORMAT_CVSD:
> > + if (lmp_esco_capable(conn->link)) {
> > + if (!find_next_esco_param(conn, esco_param_cvsd,
> > + ARRAY_SIZE(esco_param_cvsd)))
> > + return false;
> > + param = &esco_param_cvsd[conn->attempt - 1];
> > + } else {
> > + if (conn->attempt > ARRAY_SIZE(sco_param_cvsd))
> > + return false;
> > + param = &sco_param_cvsd[conn->attempt - 1];
> > + }
> > + cp.tx_coding_format.id = 2;
> > + cp.rx_coding_format.id = 2;
> > + cp.tx_codec_frame_size = __cpu_to_le16(60);
> > + cp.rx_codec_frame_size = __cpu_to_le16(60);
> > + cp.in_bandwidth = __cpu_to_le32(16000);
> > + cp.out_bandwidth = __cpu_to_le32(16000);
> > + cp.in_coding_format.id = 4;
> > + cp.out_coding_format.id = 4;
> > + cp.in_coded_data_size = __cpu_to_le16(16);
> > + cp.out_coded_data_size = __cpu_to_le16(16);
> > + cp.in_pcm_data_format = 2;
> > + cp.out_pcm_data_format = 2;
> > + cp.in_pcm_sample_payload_msb_pos = 0;
> > + cp.out_pcm_sample_payload_msb_pos = 0;
> > + cp.in_data_path = conn->codec.data_path;
> > + cp.out_data_path = conn->codec.data_path;
> > + cp.in_transport_unit_size = 16;
> > + cp.out_transport_unit_size = 16;
> > + break;
> > + default:
> > + return false;
> > + }
> > +
> > + cp.retrans_effort = param->retrans_effort;
> > + cp.pkt_type = __cpu_to_le16(param->pkt_type);
> > + cp.max_latency = __cpu_to_le16(param->max_latency);
> > +
> > + if (hci_send_cmd(hdev, HCI_OP_ENHANCED_SETUP_SYNC_CONN,
> sizeof(cp), &cp) < 0)
> > + return false;
> > +
> > + return true;
> > +}
> > +
> > +static bool hci_setup_sync_conn(struct hci_conn *conn, __u16 handle)
> > {
> > struct hci_dev *hdev = conn->hdev;
> > struct hci_cp_setup_sync_conn cp;
> > const struct sco_param *param;
> >
> > - BT_DBG("hcon %p", conn);
> > + bt_dev_dbg(hdev, "hcon %p", conn);
> >
> > conn->state = BT_CONNECT;
> > conn->out = true;
> > @@ -359,6 +449,14 @@ bool hci_setup_sync(struct hci_conn *conn, __u16
> handle)
> > return true;
> > }
> >
> > +bool hci_setup_sync(struct hci_conn *conn, __u16 handle) {
> > + if (enhanced_sco_capable(conn->hdev))
> > + return hci_enhanced_setup_sync_conn(conn, handle);
> > +
> > + return hci_setup_sync_conn(conn, handle); }
> > +
> > u8 hci_le_conn_update(struct hci_conn *conn, u16 min, u16 max, u16
> latency,
> > u16 to_multiplier) { @@ -1319,7 +1417,7 @@
> > struct hci_conn *hci_connect_acl(struct hci_dev *hdev, bdaddr_t *dst,
> > }
> >
> > struct hci_conn *hci_connect_sco(struct hci_dev *hdev, int type, bdaddr_t
> *dst,
> > - __u16 setting)
> > + __u16 setting, struct bt_codec
> > + *codec)
> > {
> > struct hci_conn *acl;
> > struct hci_conn *sco;
> > @@ -1344,6 +1442,7 @@ struct hci_conn *hci_connect_sco(struct hci_dev
> *hdev, int type, bdaddr_t *dst,
> > hci_conn_hold(sco);
> >
> > sco->setting = setting;
> > + sco->codec = *codec;
> >
> > if (acl->state == BT_CONNECTED &&
> > (sco->state == BT_OPEN || sco->state == BT_CLOSED)) { diff
> > --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c index
> > 1c3018202564..18985ac6a83f 100644
> > --- a/net/bluetooth/hci_event.c
> > +++ b/net/bluetooth/hci_event.c
> > @@ -2236,6 +2236,41 @@ static void hci_cs_setup_sync_conn(struct
> hci_dev *hdev, __u8 status)
> > hci_dev_unlock(hdev);
> > }
> >
> > +static void hci_cs_enhanced_setup_sync_conn(struct hci_dev *hdev,
> > +__u8 status) {
> > + struct hci_cp_enhanced_setup_sync_conn *cp;
> > + struct hci_conn *acl, *sco;
> > + __u16 handle;
> > +
> > + bt_dev_dbg(hdev, "status 0x%2.2x", status);
> > +
> > + if (!status)
> > + return;
> > +
> > + cp = hci_sent_cmd_data(hdev,
> HCI_OP_ENHANCED_SETUP_SYNC_CONN);
> > + if (!cp)
> > + return;
> > +
> > + handle = __le16_to_cpu(cp->handle);
> > +
> > + bt_dev_dbg(hdev, "handle 0x%4.4x", handle);
> > +
> > + hci_dev_lock(hdev);
> > +
> > + acl = hci_conn_hash_lookup_handle(hdev, handle);
> > + if (acl) {
> > + sco = acl->link;
> > + if (sco) {
> > + sco->state = BT_CLOSED;
> > +
> > + hci_connect_cfm(sco, status);
> > + hci_conn_del(sco);
> > + }
> > + }
> > +
> > + hci_dev_unlock(hdev);
> > +}
> > +
> > static void hci_cs_sniff_mode(struct hci_dev *hdev, __u8 status) {
> > struct hci_cp_sniff_mode *cp;
> > @@ -3715,6 +3750,10 @@ static void hci_cmd_status_evt(struct hci_dev
> *hdev, struct sk_buff *skb,
> > hci_cs_setup_sync_conn(hdev, ev->status);
> > break;
> >
> > + case HCI_OP_ENHANCED_SETUP_SYNC_CONN:
> > + hci_cs_enhanced_setup_sync_conn(hdev, ev->status);
> > + break;
> > +
> > case HCI_OP_SNIFF_MODE:
> > hci_cs_sniff_mode(hdev, ev->status);
> > break;
> > diff --git a/net/bluetooth/sco.c b/net/bluetooth/sco.c index
> > 34541e971dc7..5ff06ac05fef 100644
> > --- a/net/bluetooth/sco.c
> > +++ b/net/bluetooth/sco.c
> > @@ -240,7 +240,7 @@ static int sco_connect(struct sock *sk)
> > }
> >
> > hcon = hci_connect_sco(hdev, type, &sco_pi(sk)->dst,
> > - sco_pi(sk)->setting);
> > + sco_pi(sk)->setting,
> > + &sco_pi(sk)->codec);
> > if (IS_ERR(hcon)) {
> > err = PTR_ERR(hcon);
> > goto done;
> > @@ -927,6 +927,15 @@ static int sco_sock_setsockopt(struct socket *sock,
> int level, int optname,
> > }
> >
> > sco_pi(sk)->setting = voice.setting;
> > + hdev = hci_get_route(&sco_pi(sk)->dst, &sco_pi(sk)->src,
> > + BDADDR_BREDR);
> > + if (!hdev) {
> > + err = -EBADFD;
> > + break;
> > + }
> > + if (enhanced_sco_capable(hdev) &&
> > + voice.setting == BT_VOICE_TRANSPARENT)
> > + sco_pi(sk)->codec.id =
> > + CODING_FORMAT_TRANSPARENT;
>
>
> hci_get_route does call hci_dev_hold so you need hci_dev_put once you are
> done with it.
Ack. I think same comment is relevant in 04/10 and 06/10 patch. I will send an updated version.
>
> > break;
> >
> > case BT_PKT_STATUS:
> > --
> > 2.17.1
> >
>
>
> --
> Luiz Augusto von Dentz
Thanks,
Kiran
next prev parent reply other threads:[~2021-08-14 6:41 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-07-27 8:47 [PATCH v11 01/10] Bluetooth: Enumerate local supported codec and cache details Kiran K
2021-07-27 8:47 ` [PATCH v11 02/10] Bluetooth: Add support for Read Local Supported Codecs V2 Kiran K
2021-07-30 14:07 ` Marcel Holtmann
2021-07-27 8:47 ` [PATCH v11 03/10] Bluetooth: btintel: Read supported offload usecases Kiran K
2021-07-30 14:10 ` Marcel Holtmann
2021-08-14 6:32 ` K, Kiran
2021-07-27 8:47 ` [PATCH v11 04/10] Bluetooth: Allow querying of supported offload codecs over SCO socket Kiran K
2021-07-30 14:14 ` Marcel Holtmann
2021-08-14 6:33 ` K, Kiran
2021-07-27 8:47 ` [PATCH v11 05/10] Bluetooth: btintel: Define callback to fetch data_path_id Kiran K
2021-07-27 8:47 ` [PATCH v11 06/10] Bluetooth: Allow setting of codec for HFP offload usecase Kiran K
2021-07-30 14:17 ` Marcel Holtmann
2021-08-01 23:45 ` K, Kiran
2021-08-14 6:39 ` K, Kiran
2021-07-27 8:47 ` [PATCH v11 07/10] Bluetooth: btintel: Define a callback to fetch codec config data Kiran K
2021-07-27 8:47 ` [PATCH v11 08/10] Bluetooth: Add support for HCI_Enhanced_Setup_Synchronous_Connection command Kiran K
2021-07-28 3:59 ` Luiz Augusto von Dentz
2021-08-14 6:41 ` K, Kiran [this message]
2021-07-27 8:47 ` [PATCH v11 09/10] Bluetooth: Add support for msbc coding format Kiran K
2021-07-27 8:47 ` [PATCH v11 10/10] Bluetooth: Add offload feature under experimental flag Kiran K
2021-07-30 14:22 ` Marcel Holtmann
2021-08-14 6:42 ` K, Kiran
2021-07-27 9:12 ` [v11,01/10] Bluetooth: Enumerate local supported codec and cache details bluez.test.bot
2021-07-30 14:06 ` [PATCH v11 01/10] " Marcel Holtmann
2021-08-02 0:23 ` K, Kiran
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=DM8PR11MB5573975AAEBABB19041C8CD8F5FB9@DM8PR11MB5573.namprd11.prod.outlook.com \
--to=kiran.k@intel.com \
--cc=chethan.tumkur.narayan@intel.com \
--cc=linux-bluetooth@vger.kernel.org \
--cc=luiz.dentz@gmail.com \
--cc=ravishankar.srivatsa@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).