[PATCH 1/5] dt-bindings: fsl: scu: add fallback compatible string for clock

[Aisheng Dong <aisheng.dong@nxp.com>]

SCU clock can be used in a similar way by IMX8QXP and IMX8QM SoCs.
Let's add a "fsl,scu-clk" fallback compatible string to allow other
SoCs to reuse the common part.

Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Michael Turquette <mturquette@baylibre.com>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
---
 Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
index c20f38e..b8ae529 100644
--- a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
+++ b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
@@ -70,7 +70,9 @@ Clock bindings based on SCU Message Protocol
 This binding uses the common clock binding[1].
 
 Required properties:
-- compatible:		Should be "fsl,imx8qxp-clock".
+- compatible:		Should be one of:
+			  "fsl,imx8qxp-clock"
+			followed by "fsl,scu-clk"
 - #clock-cells:		Should be 1. Contains the Clock ID value.
 - clocks:		List of clock specifiers, must contain an entry for
 			each required entry in clock-names
@@ -128,7 +130,7 @@ firmware {
 			  &lsio_mu1 1 3>;
 
 		clk: clk {
-			compatible = "fsl,imx8qxp-clk";
+			compatible = "fsl,imx8qxp-clk", "fsl,scu-clk";
 			#clock-cells = <1>;
 		};
 
-- 
2.7.4