From: Stefan Wahren <wahrenst@gmx.net>
To: Eric Anholt <eric@anholt.net>,
Florian Fainelli <f.fainelli@gmail.com>,
Ray Jui <rjui@broadcom.com>,
Scott Branden <sbranden@broadcom.com>,
Wolfram Sang <wsa@the-dreams.de>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>
Cc: bcm-kernel-feedback-list@broadcom.com,
linux-arm-kernel@lists.infradead.org, linux-i2c@vger.kernel.org,
linux-clk@vger.kernel.org, linux-rpi-kernel@lists.infradead.org,
devicetree@vger.kernel.org, Stefan Wahren <wahrenst@gmx.net>
Subject: [PATCH V2 04/13] clk: bcm2835: Introduce SoC specific clock registration
Date: Tue, 13 Aug 2019 18:20:39 +0200 [thread overview]
Message-ID: <1565713248-4906-5-git-send-email-wahrenst@gmx.net> (raw)
In-Reply-To: <1565713248-4906-1-git-send-email-wahrenst@gmx.net>
In order to support SoC specific clocks (e.g. emmc2 for BCM2711), we
extend the description with a SoC support flag. This approach avoids long
and mostly redundant lists of clock IDs. Since only PLLH is specific to
BCM2835, we register the rest of the clocks as common to all SoC.
Suggested-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Matthias Brugger <mbrugger@suse.com>
Acked-by: Eric Anholt <eric@anholt.net>
---
drivers/clk/bcm/clk-bcm2835.c | 113 +++++++++++++++++++++++++++++++++++-------
1 file changed, 96 insertions(+), 17 deletions(-)
diff --git a/drivers/clk/bcm/clk-bcm2835.c b/drivers/clk/bcm/clk-bcm2835.c
index 867ae3c..21cd952 100644
--- a/drivers/clk/bcm/clk-bcm2835.c
+++ b/drivers/clk/bcm/clk-bcm2835.c
@@ -31,7 +31,7 @@
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/module.h>
-#include <linux/of.h>
+#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <dt-bindings/clock/bcm2835.h>
@@ -289,6 +289,9 @@
#define LOCK_TIMEOUT_NS 100000000
#define BCM2835_MAX_FB_RATE 1750000000u
+#define SOC_BCM2835 BIT(0)
+#define SOC_ALL (SOC_BCM2835)
+
/*
* Names of clocks used within the driver that need to be replaced
* with an external parent's name. This array is in the order that
@@ -320,6 +323,10 @@ struct bcm2835_cprman {
struct clk_hw_onecell_data onecell;
};
+struct cprman_plat_data {
+ unsigned int soc;
+};
+
static inline void cprman_write(struct bcm2835_cprman *cprman, u32 reg, u32 val)
{
writel(CM_PASSWORD | val, cprman->regs + reg);
@@ -1451,22 +1458,28 @@ typedef struct clk_hw *(*bcm2835_clk_register)(struct bcm2835_cprman *cprman,
const void *data);
struct bcm2835_clk_desc {
bcm2835_clk_register clk_register;
+ unsigned int supported;
const void *data;
};
/* assignment helper macros for different clock types */
-#define _REGISTER(f, ...) { .clk_register = (bcm2835_clk_register)f, \
- .data = __VA_ARGS__ }
-#define REGISTER_PLL(...) _REGISTER(&bcm2835_register_pll, \
+#define _REGISTER(f, s, ...) { .clk_register = (bcm2835_clk_register)f, \
+ .supported = s, \
+ .data = __VA_ARGS__ }
+#define REGISTER_PLL(s, ...) _REGISTER(&bcm2835_register_pll, \
+ s, \
&(struct bcm2835_pll_data) \
{__VA_ARGS__})
-#define REGISTER_PLL_DIV(...) _REGISTER(&bcm2835_register_pll_divider, \
- &(struct bcm2835_pll_divider_data) \
- {__VA_ARGS__})
-#define REGISTER_CLK(...) _REGISTER(&bcm2835_register_clock, \
+#define REGISTER_PLL_DIV(s, ...) _REGISTER(&bcm2835_register_pll_divider, \
+ s, \
+ &(struct bcm2835_pll_divider_data) \
+ {__VA_ARGS__})
+#define REGISTER_CLK(s, ...) _REGISTER(&bcm2835_register_clock, \
+ s, \
&(struct bcm2835_clock_data) \
{__VA_ARGS__})
-#define REGISTER_GATE(...) _REGISTER(&bcm2835_register_gate, \
+#define REGISTER_GATE(s, ...) _REGISTER(&bcm2835_register_gate, \
+ s, \
&(struct bcm2835_gate_data) \
{__VA_ARGS__})
@@ -1480,7 +1493,8 @@ static const char *const bcm2835_clock_osc_parents[] = {
"testdebug1"
};
-#define REGISTER_OSC_CLK(...) REGISTER_CLK( \
+#define REGISTER_OSC_CLK(s, ...) REGISTER_CLK( \
+ s, \
.num_mux_parents = ARRAY_SIZE(bcm2835_clock_osc_parents), \
.parents = bcm2835_clock_osc_parents, \
__VA_ARGS__)
@@ -1497,7 +1511,8 @@ static const char *const bcm2835_clock_per_parents[] = {
"pllh_aux",
};
-#define REGISTER_PER_CLK(...) REGISTER_CLK( \
+#define REGISTER_PER_CLK(s, ...) REGISTER_CLK( \
+ s, \
.num_mux_parents = ARRAY_SIZE(bcm2835_clock_per_parents), \
.parents = bcm2835_clock_per_parents, \
__VA_ARGS__)
@@ -1522,7 +1537,8 @@ static const char *const bcm2835_pcm_per_parents[] = {
"-",
};
-#define REGISTER_PCM_CLK(...) REGISTER_CLK( \
+#define REGISTER_PCM_CLK(s, ...) REGISTER_CLK( \
+ s, \
.num_mux_parents = ARRAY_SIZE(bcm2835_pcm_per_parents), \
.parents = bcm2835_pcm_per_parents, \
__VA_ARGS__)
@@ -1541,7 +1557,8 @@ static const char *const bcm2835_clock_vpu_parents[] = {
"pllc_core2",
};
-#define REGISTER_VPU_CLK(...) REGISTER_CLK( \
+#define REGISTER_VPU_CLK(s, ...) REGISTER_CLK( \
+ s, \
.num_mux_parents = ARRAY_SIZE(bcm2835_clock_vpu_parents), \
.parents = bcm2835_clock_vpu_parents, \
__VA_ARGS__)
@@ -1577,12 +1594,14 @@ static const char *const bcm2835_clock_dsi1_parents[] = {
"dsi1_byte_inv",
};
-#define REGISTER_DSI0_CLK(...) REGISTER_CLK( \
+#define REGISTER_DSI0_CLK(s, ...) REGISTER_CLK( \
+ s, \
.num_mux_parents = ARRAY_SIZE(bcm2835_clock_dsi0_parents), \
.parents = bcm2835_clock_dsi0_parents, \
__VA_ARGS__)
-#define REGISTER_DSI1_CLK(...) REGISTER_CLK( \
+#define REGISTER_DSI1_CLK(s, ...) REGISTER_CLK( \
+ s, \
.num_mux_parents = ARRAY_SIZE(bcm2835_clock_dsi1_parents), \
.parents = bcm2835_clock_dsi1_parents, \
__VA_ARGS__)
@@ -1602,6 +1621,7 @@ static const struct bcm2835_clk_desc clk_desc_array[] = {
* AUDIO domain is on.
*/
[BCM2835_PLLA] = REGISTER_PLL(
+ SOC_ALL,
.name = "plla",
.cm_ctrl_reg = CM_PLLA,
.a2w_ctrl_reg = A2W_PLLA_CTRL,
@@ -1616,6 +1636,7 @@ static const struct bcm2835_clk_desc clk_desc_array[] = {
.max_rate = 2400000000u,
.max_fb_rate = BCM2835_MAX_FB_RATE),
[BCM2835_PLLA_CORE] = REGISTER_PLL_DIV(
+ SOC_ALL,
.name = "plla_core",
.source_pll = "plla",
.cm_reg = CM_PLLA,
@@ -1625,6 +1646,7 @@ static const struct bcm2835_clk_desc clk_desc_array[] = {
.fixed_divider = 1,
.flags = CLK_SET_RATE_PARENT),
[BCM2835_PLLA_PER] = REGISTER_PLL_DIV(
+ SOC_ALL,
.name = "plla_per",
.source_pll = "plla",
.cm_reg = CM_PLLA,
@@ -1634,6 +1656,7 @@ static const struct bcm2835_clk_desc clk_desc_array[] = {
.fixed_divider = 1,
.flags = CLK_SET_RATE_PARENT),
[BCM2835_PLLA_DSI0] = REGISTER_PLL_DIV(
+ SOC_ALL,
.name = "plla_dsi0",
.source_pll = "plla",
.cm_reg = CM_PLLA,
@@ -1642,6 +1665,7 @@ static const struct bcm2835_clk_desc clk_desc_array[] = {
.hold_mask = CM_PLLA_HOLDDSI0,
.fixed_divider = 1),
[BCM2835_PLLA_CCP2] = REGISTER_PLL_DIV(
+ SOC_ALL,
.name = "plla_ccp2",
.source_pll = "plla",
.cm_reg = CM_PLLA,
@@ -1663,6 +1687,7 @@ static const struct bcm2835_clk_desc clk_desc_array[] = {
* AUDIO domain is on.
*/
[BCM2835_PLLC] = REGISTER_PLL(
+ SOC_ALL,
.name = "pllc",
.cm_ctrl_reg = CM_PLLC,
.a2w_ctrl_reg = A2W_PLLC_CTRL,
@@ -1677,6 +1702,7 @@ static const struct bcm2835_clk_desc clk_desc_array[] = {
.max_rate = 3000000000u,
.max_fb_rate = BCM2835_MAX_FB_RATE),
[BCM2835_PLLC_CORE0] = REGISTER_PLL_DIV(
+ SOC_ALL,
.name = "pllc_core0",
.source_pll = "pllc",
.cm_reg = CM_PLLC,
@@ -1686,6 +1712,7 @@ static const struct bcm2835_clk_desc clk_desc_array[] = {
.fixed_divider = 1,
.flags = CLK_SET_RATE_PARENT),
[BCM2835_PLLC_CORE1] = REGISTER_PLL_DIV(
+ SOC_ALL,
.name = "pllc_core1",
.source_pll = "pllc",
.cm_reg = CM_PLLC,
@@ -1695,6 +1722,7 @@ static const struct bcm2835_clk_desc clk_desc_array[] = {
.fixed_divider = 1,
.flags = CLK_SET_RATE_PARENT),
[BCM2835_PLLC_CORE2] = REGISTER_PLL_DIV(
+ SOC_ALL,
.name = "pllc_core2",
.source_pll = "pllc",
.cm_reg = CM_PLLC,
@@ -1704,6 +1732,7 @@ static const struct bcm2835_clk_desc clk_desc_array[] = {
.fixed_divider = 1,
.flags = CLK_SET_RATE_PARENT),
[BCM2835_PLLC_PER] = REGISTER_PLL_DIV(
+ SOC_ALL,
.name = "pllc_per",
.source_pll = "pllc",
.cm_reg = CM_PLLC,
@@ -1720,6 +1749,7 @@ static const struct bcm2835_clk_desc clk_desc_array[] = {
* AUDIO domain is on.
*/
[BCM2835_PLLD] = REGISTER_PLL(
+ SOC_ALL,
.name = "plld",
.cm_ctrl_reg = CM_PLLD,
.a2w_ctrl_reg = A2W_PLLD_CTRL,
@@ -1734,6 +1764,7 @@ static const struct bcm2835_clk_desc clk_desc_array[] = {
.max_rate = 2400000000u,
.max_fb_rate = BCM2835_MAX_FB_RATE),
[BCM2835_PLLD_CORE] = REGISTER_PLL_DIV(
+ SOC_ALL,
.name = "plld_core",
.source_pll = "plld",
.cm_reg = CM_PLLD,
@@ -1743,6 +1774,7 @@ static const struct bcm2835_clk_desc clk_desc_array[] = {
.fixed_divider = 1,
.flags = CLK_SET_RATE_PARENT),
[BCM2835_PLLD_PER] = REGISTER_PLL_DIV(
+ SOC_ALL,
.name = "plld_per",
.source_pll = "plld",
.cm_reg = CM_PLLD,
@@ -1752,6 +1784,7 @@ static const struct bcm2835_clk_desc clk_desc_array[] = {
.fixed_divider = 1,
.flags = CLK_SET_RATE_PARENT),
[BCM2835_PLLD_DSI0] = REGISTER_PLL_DIV(
+ SOC_ALL,
.name = "plld_dsi0",
.source_pll = "plld",
.cm_reg = CM_PLLD,
@@ -1760,6 +1793,7 @@ static const struct bcm2835_clk_desc clk_desc_array[] = {
.hold_mask = CM_PLLD_HOLDDSI0,
.fixed_divider = 1),
[BCM2835_PLLD_DSI1] = REGISTER_PLL_DIV(
+ SOC_ALL,
.name = "plld_dsi1",
.source_pll = "plld",
.cm_reg = CM_PLLD,
@@ -1775,6 +1809,7 @@ static const struct bcm2835_clk_desc clk_desc_array[] = {
* It is in the HDMI power domain.
*/
[BCM2835_PLLH] = REGISTER_PLL(
+ SOC_BCM2835,
"pllh",
.cm_ctrl_reg = CM_PLLH,
.a2w_ctrl_reg = A2W_PLLH_CTRL,
@@ -1789,6 +1824,7 @@ static const struct bcm2835_clk_desc clk_desc_array[] = {
.max_rate = 3000000000u,
.max_fb_rate = BCM2835_MAX_FB_RATE),
[BCM2835_PLLH_RCAL] = REGISTER_PLL_DIV(
+ SOC_BCM2835,
.name = "pllh_rcal",
.source_pll = "pllh",
.cm_reg = CM_PLLH,
@@ -1798,6 +1834,7 @@ static const struct bcm2835_clk_desc clk_desc_array[] = {
.fixed_divider = 10,
.flags = CLK_SET_RATE_PARENT),
[BCM2835_PLLH_AUX] = REGISTER_PLL_DIV(
+ SOC_BCM2835,
.name = "pllh_aux",
.source_pll = "pllh",
.cm_reg = CM_PLLH,
@@ -1807,6 +1844,7 @@ static const struct bcm2835_clk_desc clk_desc_array[] = {
.fixed_divider = 1,
.flags = CLK_SET_RATE_PARENT),
[BCM2835_PLLH_PIX] = REGISTER_PLL_DIV(
+ SOC_BCM2835,
.name = "pllh_pix",
.source_pll = "pllh",
.cm_reg = CM_PLLH,
@@ -1822,6 +1860,7 @@ static const struct bcm2835_clk_desc clk_desc_array[] = {
/* One Time Programmable Memory clock. Maximum 10Mhz. */
[BCM2835_CLOCK_OTP] = REGISTER_OSC_CLK(
+ SOC_ALL,
.name = "otp",
.ctl_reg = CM_OTPCTL,
.div_reg = CM_OTPDIV,
@@ -1833,6 +1872,7 @@ static const struct bcm2835_clk_desc clk_desc_array[] = {
* bythe watchdog timer and the camera pulse generator.
*/
[BCM2835_CLOCK_TIMER] = REGISTER_OSC_CLK(
+ SOC_ALL,
.name = "timer",
.ctl_reg = CM_TIMERCTL,
.div_reg = CM_TIMERDIV,
@@ -1843,12 +1883,14 @@ static const struct bcm2835_clk_desc clk_desc_array[] = {
* Generally run at 2Mhz, max 5Mhz.
*/
[BCM2835_CLOCK_TSENS] = REGISTER_OSC_CLK(
+ SOC_ALL,
.name = "tsens",
.ctl_reg = CM_TSENSCTL,
.div_reg = CM_TSENSDIV,
.int_bits = 5,
.frac_bits = 0),
[BCM2835_CLOCK_TEC] = REGISTER_OSC_CLK(
+ SOC_ALL,
.name = "tec",
.ctl_reg = CM_TECCTL,
.div_reg = CM_TECDIV,
@@ -1857,6 +1899,7 @@ static const struct bcm2835_clk_desc clk_desc_array[] = {
/* clocks with vpu parent mux */
[BCM2835_CLOCK_H264] = REGISTER_VPU_CLK(
+ SOC_ALL,
.name = "h264",
.ctl_reg = CM_H264CTL,
.div_reg = CM_H264DIV,
@@ -1864,6 +1907,7 @@ static const struct bcm2835_clk_desc clk_desc_array[] = {
.frac_bits = 8,
.tcnt_mux = 1),
[BCM2835_CLOCK_ISP] = REGISTER_VPU_CLK(
+ SOC_ALL,
.name = "isp",
.ctl_reg = CM_ISPCTL,
.div_reg = CM_ISPDIV,
@@ -1876,6 +1920,7 @@ static const struct bcm2835_clk_desc clk_desc_array[] = {
* in the SDRAM controller can't be used.
*/
[BCM2835_CLOCK_SDRAM] = REGISTER_VPU_CLK(
+ SOC_ALL,
.name = "sdram",
.ctl_reg = CM_SDCCTL,
.div_reg = CM_SDCDIV,
@@ -1883,6 +1928,7 @@ static const struct bcm2835_clk_desc clk_desc_array[] = {
.frac_bits = 0,
.tcnt_mux = 3),
[BCM2835_CLOCK_V3D] = REGISTER_VPU_CLK(
+ SOC_ALL,
.name = "v3d",
.ctl_reg = CM_V3DCTL,
.div_reg = CM_V3DDIV,
@@ -1896,6 +1942,7 @@ static const struct bcm2835_clk_desc clk_desc_array[] = {
* in various hardware documentation.
*/
[BCM2835_CLOCK_VPU] = REGISTER_VPU_CLK(
+ SOC_ALL,
.name = "vpu",
.ctl_reg = CM_VPUCTL,
.div_reg = CM_VPUDIV,
@@ -1907,6 +1954,7 @@ static const struct bcm2835_clk_desc clk_desc_array[] = {
/* clocks with per parent mux */
[BCM2835_CLOCK_AVEO] = REGISTER_PER_CLK(
+ SOC_ALL,
.name = "aveo",
.ctl_reg = CM_AVEOCTL,
.div_reg = CM_AVEODIV,
@@ -1914,6 +1962,7 @@ static const struct bcm2835_clk_desc clk_desc_array[] = {
.frac_bits = 0,
.tcnt_mux = 38),
[BCM2835_CLOCK_CAM0] = REGISTER_PER_CLK(
+ SOC_ALL,
.name = "cam0",
.ctl_reg = CM_CAM0CTL,
.div_reg = CM_CAM0DIV,
@@ -1921,6 +1970,7 @@ static const struct bcm2835_clk_desc clk_desc_array[] = {
.frac_bits = 8,
.tcnt_mux = 14),
[BCM2835_CLOCK_CAM1] = REGISTER_PER_CLK(
+ SOC_ALL,
.name = "cam1",
.ctl_reg = CM_CAM1CTL,
.div_reg = CM_CAM1DIV,
@@ -1928,12 +1978,14 @@ static const struct bcm2835_clk_desc clk_desc_array[] = {
.frac_bits = 8,
.tcnt_mux = 15),
[BCM2835_CLOCK_DFT] = REGISTER_PER_CLK(
+ SOC_ALL,
.name = "dft",
.ctl_reg = CM_DFTCTL,
.div_reg = CM_DFTDIV,
.int_bits = 5,
.frac_bits = 0),
[BCM2835_CLOCK_DPI] = REGISTER_PER_CLK(
+ SOC_ALL,
.name = "dpi",
.ctl_reg = CM_DPICTL,
.div_reg = CM_DPIDIV,
@@ -1943,6 +1995,7 @@ static const struct bcm2835_clk_desc clk_desc_array[] = {
/* Arasan EMMC clock */
[BCM2835_CLOCK_EMMC] = REGISTER_PER_CLK(
+ SOC_ALL,
.name = "emmc",
.ctl_reg = CM_EMMCCTL,
.div_reg = CM_EMMCDIV,
@@ -1952,6 +2005,7 @@ static const struct bcm2835_clk_desc clk_desc_array[] = {
/* General purpose (GPIO) clocks */
[BCM2835_CLOCK_GP0] = REGISTER_PER_CLK(
+ SOC_ALL,
.name = "gp0",
.ctl_reg = CM_GP0CTL,
.div_reg = CM_GP0DIV,
@@ -1960,6 +2014,7 @@ static const struct bcm2835_clk_desc clk_desc_array[] = {
.is_mash_clock = true,
.tcnt_mux = 20),
[BCM2835_CLOCK_GP1] = REGISTER_PER_CLK(
+ SOC_ALL,
.name = "gp1",
.ctl_reg = CM_GP1CTL,
.div_reg = CM_GP1DIV,
@@ -1969,6 +2024,7 @@ static const struct bcm2835_clk_desc clk_desc_array[] = {
.is_mash_clock = true,
.tcnt_mux = 21),
[BCM2835_CLOCK_GP2] = REGISTER_PER_CLK(
+ SOC_ALL,
.name = "gp2",
.ctl_reg = CM_GP2CTL,
.div_reg = CM_GP2DIV,
@@ -1978,6 +2034,7 @@ static const struct bcm2835_clk_desc clk_desc_array[] = {
/* HDMI state machine */
[BCM2835_CLOCK_HSM] = REGISTER_PER_CLK(
+ SOC_ALL,
.name = "hsm",
.ctl_reg = CM_HSMCTL,
.div_reg = CM_HSMDIV,
@@ -1985,6 +2042,7 @@ static const struct bcm2835_clk_desc clk_desc_array[] = {
.frac_bits = 8,
.tcnt_mux = 22),
[BCM2835_CLOCK_PCM] = REGISTER_PCM_CLK(
+ SOC_ALL,
.name = "pcm",
.ctl_reg = CM_PCMCTL,
.div_reg = CM_PCMDIV,
@@ -1994,6 +2052,7 @@ static const struct bcm2835_clk_desc clk_desc_array[] = {
.low_jitter = true,
.tcnt_mux = 23),
[BCM2835_CLOCK_PWM] = REGISTER_PER_CLK(
+ SOC_ALL,
.name = "pwm",
.ctl_reg = CM_PWMCTL,
.div_reg = CM_PWMDIV,
@@ -2002,6 +2061,7 @@ static const struct bcm2835_clk_desc clk_desc_array[] = {
.is_mash_clock = true,
.tcnt_mux = 24),
[BCM2835_CLOCK_SLIM] = REGISTER_PER_CLK(
+ SOC_ALL,
.name = "slim",
.ctl_reg = CM_SLIMCTL,
.div_reg = CM_SLIMDIV,
@@ -2010,6 +2070,7 @@ static const struct bcm2835_clk_desc clk_desc_array[] = {
.is_mash_clock = true,
.tcnt_mux = 25),
[BCM2835_CLOCK_SMI] = REGISTER_PER_CLK(
+ SOC_ALL,
.name = "smi",
.ctl_reg = CM_SMICTL,
.div_reg = CM_SMIDIV,
@@ -2017,6 +2078,7 @@ static const struct bcm2835_clk_desc clk_desc_array[] = {
.frac_bits = 8,
.tcnt_mux = 27),
[BCM2835_CLOCK_UART] = REGISTER_PER_CLK(
+ SOC_ALL,
.name = "uart",
.ctl_reg = CM_UARTCTL,
.div_reg = CM_UARTDIV,
@@ -2026,6 +2088,7 @@ static const struct bcm2835_clk_desc clk_desc_array[] = {
/* TV encoder clock. Only operating frequency is 108Mhz. */
[BCM2835_CLOCK_VEC] = REGISTER_PER_CLK(
+ SOC_ALL,
.name = "vec",
.ctl_reg = CM_VECCTL,
.div_reg = CM_VECDIV,
@@ -2040,6 +2103,7 @@ static const struct bcm2835_clk_desc clk_desc_array[] = {
/* dsi clocks */
[BCM2835_CLOCK_DSI0E] = REGISTER_PER_CLK(
+ SOC_ALL,
.name = "dsi0e",
.ctl_reg = CM_DSI0ECTL,
.div_reg = CM_DSI0EDIV,
@@ -2047,6 +2111,7 @@ static const struct bcm2835_clk_desc clk_desc_array[] = {
.frac_bits = 8,
.tcnt_mux = 18),
[BCM2835_CLOCK_DSI1E] = REGISTER_PER_CLK(
+ SOC_ALL,
.name = "dsi1e",
.ctl_reg = CM_DSI1ECTL,
.div_reg = CM_DSI1EDIV,
@@ -2054,6 +2119,7 @@ static const struct bcm2835_clk_desc clk_desc_array[] = {
.frac_bits = 8,
.tcnt_mux = 19),
[BCM2835_CLOCK_DSI0P] = REGISTER_DSI0_CLK(
+ SOC_ALL,
.name = "dsi0p",
.ctl_reg = CM_DSI0PCTL,
.div_reg = CM_DSI0PDIV,
@@ -2061,6 +2127,7 @@ static const struct bcm2835_clk_desc clk_desc_array[] = {
.frac_bits = 0,
.tcnt_mux = 12),
[BCM2835_CLOCK_DSI1P] = REGISTER_DSI1_CLK(
+ SOC_ALL,
.name = "dsi1p",
.ctl_reg = CM_DSI1PCTL,
.div_reg = CM_DSI1PDIV,
@@ -2077,6 +2144,7 @@ static const struct bcm2835_clk_desc clk_desc_array[] = {
* non-stop vpu clock.
*/
[BCM2835_CLOCK_PERI_IMAGE] = REGISTER_GATE(
+ SOC_ALL,
.name = "peri_image",
.parent = "vpu",
.ctl_reg = CM_PERIICTL),
@@ -2109,9 +2177,14 @@ static int bcm2835_clk_probe(struct platform_device *pdev)
struct resource *res;
const struct bcm2835_clk_desc *desc;
const size_t asize = ARRAY_SIZE(clk_desc_array);
+ const struct cprman_plat_data *pdata;
size_t i;
int ret;
+ pdata = of_device_get_match_data(&pdev->dev);
+ if (!pdata)
+ return -ENODEV;
+
cprman = devm_kzalloc(dev,
struct_size(cprman, onecell.hws, asize),
GFP_KERNEL);
@@ -2147,8 +2220,10 @@ static int bcm2835_clk_probe(struct platform_device *pdev)
for (i = 0; i < asize; i++) {
desc = &clk_desc_array[i];
- if (desc->clk_register && desc->data)
+ if (desc->clk_register && desc->data &&
+ (desc->supported & pdata->soc)) {
hws[i] = desc->clk_register(cprman, desc->data);
+ }
}
ret = bcm2835_mark_sdc_parent_critical(hws[BCM2835_CLOCK_SDRAM]->clk);
@@ -2159,8 +2234,12 @@ static int bcm2835_clk_probe(struct platform_device *pdev)
&cprman->onecell);
}
+static const struct cprman_plat_data cprman_bcm2835_plat_data = {
+ .soc = SOC_BCM2835,
+};
+
static const struct of_device_id bcm2835_clk_of_match[] = {
- { .compatible = "brcm,bcm2835-cprman", },
+ { .compatible = "brcm,bcm2835-cprman", .data = &cprman_bcm2835_plat_data },
{}
};
MODULE_DEVICE_TABLE(of, bcm2835_clk_of_match);
--
2.7.4
next prev parent reply other threads:[~2019-08-13 16:21 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-13 16:20 [PATCH V2 00/13] ARM: Add minimal Raspberry Pi 4 support Stefan Wahren
2019-08-13 16:20 ` [PATCH V2 01/13] ARM: dts: bcm283x: Enable HDMI at board level Stefan Wahren
2019-08-13 16:20 ` [PATCH V2 02/13] ARM: dts: bcm283x: Move BCM2835/6/7 specific to bcm2835-common.dtsi Stefan Wahren
2019-08-13 16:20 ` [PATCH V2 03/13] dt-bindings: bcm2835-cprman: Add bcm2711 support Stefan Wahren
2019-08-16 17:41 ` Stephen Boyd
2019-08-27 16:00 ` Rob Herring
2019-08-13 16:20 ` Stefan Wahren [this message]
2019-08-13 16:20 ` [PATCH V2 05/13] clk: bcm2835: Add BCM2711_CLOCK_EMMC2 support Stefan Wahren
2019-09-12 17:24 ` Matthias Brugger
2019-09-12 18:52 ` Eric Anholt
2019-09-13 1:20 ` Stefan Wahren
2019-09-13 7:13 ` Matthias Brugger
2019-09-13 23:02 ` Florian Fainelli
2019-08-13 16:20 ` [PATCH V2 06/13] clk: bcm2835: Mark PLLD_PER as CRITICAL Stefan Wahren
2019-08-16 17:39 ` Stephen Boyd
2019-08-13 16:20 ` [PATCH V2 07/13] dt-bindings: i2c: bcm2835: Add brcm,bcm2711 compatible Stefan Wahren
2019-08-27 16:00 ` Rob Herring
2019-08-13 16:20 ` [PATCH V2 08/13] i2c: bcm2835: Avoid clk stretch quirk for BCM2711 Stefan Wahren
2019-08-14 19:36 ` Wolfram Sang
2019-08-17 7:32 ` Stefan Wahren
2019-08-17 8:30 ` Wolfram Sang
2019-08-13 16:20 ` [PATCH V2 09/13] dt-bindings: arm: Convert BCM2835 board/soc bindings to json-schema Stefan Wahren
2019-08-13 17:22 ` Rob Herring
2019-08-14 19:21 ` Stefan Wahren
2019-08-14 23:06 ` Rob Herring
2019-08-13 16:20 ` [PATCH V2 10/13] dt-bindings: arm: bcm2835: Add Raspberry Pi 4 to DT schema Stefan Wahren
2019-08-13 16:20 ` [PATCH V2 11/13] ARM: bcm: Add support for BCM2711 SoC Stefan Wahren
2019-09-10 14:13 ` Matthias Brugger
2019-08-13 16:20 ` [PATCH V2 12/13] ARM: dts: Add minimal Raspberry Pi 4 support Stefan Wahren
2019-08-13 16:20 ` [PATCH V2 13/13] MAINTAINERS: Add BCM2711 to BCM2835 ARCH Stefan Wahren
2019-08-13 20:42 ` [PATCH V2 00/13] ARM: Add minimal Raspberry Pi 4 support Eric Anholt
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1565713248-4906-5-git-send-email-wahrenst@gmx.net \
--to=wahrenst@gmx.net \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=devicetree@vger.kernel.org \
--cc=eric@anholt.net \
--cc=f.fainelli@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-rpi-kernel@lists.infradead.org \
--cc=mark.rutland@arm.com \
--cc=mturquette@baylibre.com \
--cc=rjui@broadcom.com \
--cc=robh+dt@kernel.org \
--cc=sboyd@kernel.org \
--cc=sbranden@broadcom.com \
--cc=wsa@the-dreams.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).