From: dillon.minfei@gmail.com
To: robh+dt@kernel.org, p.zabel@pengutronix.de,
mcoquelin.stm32@gmail.com, broonie@kernel.org,
devicetree@vger.kernel.org, alexandre.torgue@st.com,
thierry.reding@gmail.com, sam@ravnborg.org, airlied@linux.ie,
daniel@ffwll.ch, mturquette@baylibre.com, sboyd@kernel.org
Cc: linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-spi@vger.kernel.org,
linux-stm32@st-md-mailman.stormreply.com,
dri-devel@lists.freedesktop.org, linux-clk@vger.kernel.org,
dillon min <dillon.minfei@gmail.com>
Subject: [PATCH v4 4/8] ARM: dts: stm32: Add pin map for ltdc on stm32f429-disco board
Date: Mon, 18 May 2020 19:09:21 +0800 [thread overview]
Message-ID: <1589800165-3271-5-git-send-email-dillon.minfei@gmail.com> (raw)
In-Reply-To: <1589800165-3271-1-git-send-email-dillon.minfei@gmail.com>
From: dillon min <dillon.minfei@gmail.com>
This patch adds the pin configuration for ltdc controller
on stm32f429-disco board.
Signed-off-by: dillon min <dillon.minfei@gmail.com>
---
arch/arm/boot/dts/stm32f4-pinctrl.dtsi | 50 ++++++++++++++++++++++++++++++++++
1 file changed, 50 insertions(+)
diff --git a/arch/arm/boot/dts/stm32f4-pinctrl.dtsi b/arch/arm/boot/dts/stm32f4-pinctrl.dtsi
index 54c1b27..0eb107f 100644
--- a/arch/arm/boot/dts/stm32f4-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stm32f4-pinctrl.dtsi
@@ -316,6 +316,56 @@
};
};
+ ltdc_pins_f429_disco: ltdc-1 {
+ pins {
+ pinmux = <STM32_PINMUX('C', 6, AF14)>,
+ /* LCD_HSYNC */
+ <STM32_PINMUX('A', 4, AF14)>,
+ /* LCD_VSYNC */
+ <STM32_PINMUX('G', 7, AF14)>,
+ /* LCD_CLK */
+ <STM32_PINMUX('C', 10, AF14)>,
+ /* LCD_R2 */
+ <STM32_PINMUX('B', 0, AF9)>,
+ /* LCD_R3 */
+ <STM32_PINMUX('A', 11, AF14)>,
+ /* LCD_R4 */
+ <STM32_PINMUX('A', 12, AF14)>,
+ /* LCD_R5 */
+ <STM32_PINMUX('B', 1, AF9)>,
+ /* LCD_R6*/
+ <STM32_PINMUX('G', 6, AF14)>,
+ /* LCD_R7 */
+ <STM32_PINMUX('A', 6, AF14)>,
+ /* LCD_G2 */
+ <STM32_PINMUX('G', 10, AF9)>,
+ /* LCD_G3 */
+ <STM32_PINMUX('B', 10, AF14)>,
+ /* LCD_G4 */
+ <STM32_PINMUX('D', 6, AF14)>,
+ /* LCD_B2 */
+ <STM32_PINMUX('G', 11, AF14)>,
+ /* LCD_B3*/
+ <STM32_PINMUX('B', 11, AF14)>,
+ /* LCD_G5 */
+ <STM32_PINMUX('C', 7, AF14)>,
+ /* LCD_G6 */
+ <STM32_PINMUX('D', 3, AF14)>,
+ /* LCD_G7 */
+ <STM32_PINMUX('G', 12, AF9)>,
+ /* LCD_B4 */
+ <STM32_PINMUX('A', 3, AF14)>,
+ /* LCD_B5 */
+ <STM32_PINMUX('B', 8, AF14)>,
+ /* LCD_B6 */
+ <STM32_PINMUX('B', 9, AF14)>,
+ /* LCD_B7 */
+ <STM32_PINMUX('F', 10, AF14)>;
+ /* LCD_DE */
+ slew-rate = <2>;
+ };
+ };
+
spi5_pins: spi5-0 {
pins1 {
pinmux = <STM32_PINMUX('F', 7, AF5)>,
--
2.7.4
next prev parent reply other threads:[~2020-05-18 11:09 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-18 11:09 [PATCH v4 0/8] Enable ili9341 and l3gd20 on stm32f429-disco dillon.minfei
2020-05-18 11:09 ` [PATCH v4 1/8] ARM: dts: stm32: Add dma config for spi5 dillon.minfei
2020-05-18 11:09 ` [PATCH v4 2/8] ARM: dts: stm32: enable l3gd20 on stm32429-disco board dillon.minfei
2020-05-18 11:09 ` [PATCH v4 3/8] spi: stm32: Add 'SPI_SIMPLEX_RX', 'SPI_3WIRE_RX' support for stm32f4 dillon.minfei
2020-05-22 11:36 ` Mark Brown
2020-05-22 14:57 ` dillon min
2020-05-22 15:59 ` dillon min
2020-05-22 16:29 ` Mark Brown
2020-05-23 1:35 ` dillon min
2020-05-25 11:43 ` Mark Brown
2020-05-18 11:09 ` dillon.minfei [this message]
2020-05-18 11:09 ` [PATCH v4 5/8] dt-bindings: display: panel: Add ilitek ili9341 panel bindings dillon.minfei
2020-05-28 20:49 ` Rob Herring
2020-05-18 11:09 ` [PATCH v4 6/8] ARM: dts: stm32: enable ltdc binding with ili9341 on stm32429-disco board dillon.minfei
2020-05-18 11:09 ` [PATCH v4 7/8] clk: stm32: Fix stm32f429's ltdc driver hang in set clock rate dillon.minfei
2020-05-18 11:09 ` [PATCH v4 8/8] drm/panel: Add ilitek ili9341 panel driver dillon.minfei
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1589800165-3271-5-git-send-email-dillon.minfei@gmail.com \
--to=dillon.minfei@gmail.com \
--cc=airlied@linux.ie \
--cc=alexandre.torgue@st.com \
--cc=broonie@kernel.org \
--cc=daniel@ffwll.ch \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-spi@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=mcoquelin.stm32@gmail.com \
--cc=mturquette@baylibre.com \
--cc=p.zabel@pengutronix.de \
--cc=robh+dt@kernel.org \
--cc=sam@ravnborg.org \
--cc=sboyd@kernel.org \
--cc=thierry.reding@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).