linux-clk.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jernej Skrabec <jernej.skrabec@siol.net>
To: maxime.ripard@bootlin.com, wens@csie.org
Cc: robh+dt@kernel.org, sboyd@kernel.org, airlied@linux.ie,
	architt@codeaurora.org, a.hajda@samsung.com,
	Laurent.pinchart@ideasonboard.com, devicetree@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, linux-clk@vger.kernel.org,
	dri-devel@lists.freedesktop.org, linux-sunxi@googlegroups.com
Subject: [PATCH v2 22/29] drm/sun4i: Add support for Synopsys HDMI PHY
Date: Sun,  7 Oct 2018 11:38:58 +0200	[thread overview]
Message-ID: <20181007093905.11253-23-jernej.skrabec@siol.net> (raw)
In-Reply-To: <20181007093905.11253-1-jernej.skrabec@siol.net>

Currently sun8i-hdmi-phy driver supports only custom PHYs connected to
DW HDMI controller. Since newest Allwinner SoCs have unmodified Synopsys
PHY, driver has to be reorganized to support them.

Variant structure is expanded to allow differentiation between custom
and Sysnopsys PHYs and to hold Synopsys PHY settings.

Since DW HDMI bridge platform data has different fields for custom and
Sysnopsys PHY, function sun8i_hdmi_phy_get_ops() is replaced with
sun8i_hdmi_phy_set_ops().

Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
---
 drivers/gpu/drm/sun4i/sun8i_dw_hdmi.c  |  4 +---
 drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h  |  7 ++++++-
 drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c | 19 +++++++++++++++++--
 3 files changed, 24 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.c b/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.c
index 0306a51e1b35..492c938f119d 100644
--- a/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.c
+++ b/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.c
@@ -185,9 +185,7 @@ static int sun8i_dw_hdmi_bind(struct device *dev, struct device *master,
 	sun8i_hdmi_phy_init(hdmi->phy);
 
 	plat_data->mode_valid = hdmi->quirks->mode_valid;
-	plat_data->phy_ops = sun8i_hdmi_phy_get_ops();
-	plat_data->phy_name = "sun8i_dw_hdmi_phy";
-	plat_data->phy_data = hdmi->phy;
+	sun8i_hdmi_phy_set_ops(hdmi->phy, plat_data);
 
 	platform_set_drvdata(pdev, hdmi);
 
diff --git a/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h b/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h
index f9eb663865a4..37646ff9a7a2 100644
--- a/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h
+++ b/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h
@@ -150,6 +150,10 @@ struct sun8i_hdmi_phy;
 struct sun8i_hdmi_phy_variant {
 	bool has_phy_clk;
 	bool has_second_pll;
+	bool is_custom_phy;
+	const struct dw_hdmi_curr_ctrl *cur_ctr;
+	const struct dw_hdmi_mpll_config *mpll_cfg;
+	const struct dw_hdmi_phy_config *phy_cfg;
 	void (*phy_init)(struct sun8i_hdmi_phy *phy);
 	void (*phy_disable)(struct dw_hdmi *hdmi,
 			    struct sun8i_hdmi_phy *phy);
@@ -198,7 +202,8 @@ int sun8i_hdmi_phy_probe(struct sun8i_dw_hdmi *hdmi, struct device_node *node);
 void sun8i_hdmi_phy_remove(struct sun8i_dw_hdmi *hdmi);
 
 void sun8i_hdmi_phy_init(struct sun8i_hdmi_phy *phy);
-const struct dw_hdmi_phy_ops *sun8i_hdmi_phy_get_ops(void);
+void sun8i_hdmi_phy_set_ops(struct sun8i_hdmi_phy *phy,
+			    struct dw_hdmi_plat_data *plat_data);
 
 int sun8i_phy_clk_create(struct sun8i_hdmi_phy *phy, struct device *dev,
 			 bool second_parent);
diff --git a/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c b/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c
index adc3ba7df7e3..635825b55648 100644
--- a/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c
+++ b/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c
@@ -390,9 +390,20 @@ void sun8i_hdmi_phy_init(struct sun8i_hdmi_phy *phy)
 	phy->variant->phy_init(phy);
 }
 
-const struct dw_hdmi_phy_ops *sun8i_hdmi_phy_get_ops(void)
+void sun8i_hdmi_phy_set_ops(struct sun8i_hdmi_phy *phy,
+			    struct dw_hdmi_plat_data *plat_data)
 {
-	return &sun8i_hdmi_phy_ops;
+	struct sun8i_hdmi_phy_variant *variant = phy->variant;
+
+	if (variant->is_custom_phy) {
+		plat_data->phy_ops = &sun8i_hdmi_phy_ops;
+		plat_data->phy_name = "sun8i_dw_hdmi_phy";
+		plat_data->phy_data = phy;
+	} else {
+		plat_data->mpll_cfg = variant->mpll_cfg;
+		plat_data->cur_ctr = variant->cur_ctr;
+		plat_data->phy_config = variant->phy_cfg;
+	}
 }
 
 static struct regmap_config sun8i_hdmi_phy_regmap_config = {
@@ -404,6 +415,7 @@ static struct regmap_config sun8i_hdmi_phy_regmap_config = {
 };
 
 static const struct sun8i_hdmi_phy_variant sun8i_a83t_hdmi_phy = {
+	.is_custom_phy = true,
 	.phy_init = &sun8i_hdmi_phy_init_a83t,
 	.phy_disable = &sun8i_hdmi_phy_disable_a83t,
 	.phy_config = &sun8i_hdmi_phy_config_a83t,
@@ -411,6 +423,7 @@ static const struct sun8i_hdmi_phy_variant sun8i_a83t_hdmi_phy = {
 
 static const struct sun8i_hdmi_phy_variant sun8i_h3_hdmi_phy = {
 	.has_phy_clk = true,
+	.is_custom_phy = true,
 	.phy_init = &sun8i_hdmi_phy_init_h3,
 	.phy_disable = &sun8i_hdmi_phy_disable_h3,
 	.phy_config = &sun8i_hdmi_phy_config_h3,
@@ -419,6 +432,7 @@ static const struct sun8i_hdmi_phy_variant sun8i_h3_hdmi_phy = {
 static const struct sun8i_hdmi_phy_variant sun8i_r40_hdmi_phy = {
 	.has_phy_clk = true,
 	.has_second_pll = true,
+	.is_custom_phy = true,
 	.phy_init = &sun8i_hdmi_phy_init_h3,
 	.phy_disable = &sun8i_hdmi_phy_disable_h3,
 	.phy_config = &sun8i_hdmi_phy_config_h3,
@@ -426,6 +440,7 @@ static const struct sun8i_hdmi_phy_variant sun8i_r40_hdmi_phy = {
 
 static const struct sun8i_hdmi_phy_variant sun50i_a64_hdmi_phy = {
 	.has_phy_clk = true,
+	.is_custom_phy = true,
 	.phy_init = &sun8i_hdmi_phy_init_h3,
 	.phy_disable = &sun8i_hdmi_phy_disable_h3,
 	.phy_config = &sun8i_hdmi_phy_config_h3,
-- 
2.19.0


  parent reply	other threads:[~2018-10-07  9:41 UTC|newest]

Thread overview: 52+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-10-07  9:38 [PATCH v2 00/29] Allwinner H6 DE3 and HDMI support Jernej Skrabec
2018-10-07  9:38 ` [PATCH v2 01/29] dt-bindings: bus: add H6 DE3 bus binding Jernej Skrabec
2018-10-08  8:31   ` Maxime Ripard
2018-10-08 14:25     ` Jernej Škrabec
2018-10-07  9:38 ` [PATCH v2 02/29] clk: sunxi-ng: Adjust MP clock parent rate when allowed Jernej Skrabec
2018-10-07  9:38 ` [PATCH v2 03/29] clk: sunxi-ng: Use u64 for calculation of NM rate Jernej Skrabec
2018-10-07  9:38 ` [PATCH v2 04/29] clk: sunxi-ng: h6: Set video PLLs limits Jernej Skrabec
2018-10-12  8:13   ` [linux-sunxi] " Jagan Teki
2018-10-12  9:03     ` Chen-Yu Tsai
2018-10-07  9:38 ` [PATCH v2 05/29] dt-bindings: clock: sun8i-de2: Add H6 DE3 clock description Jernej Skrabec
2018-10-07  9:38 ` [PATCH v2 06/29] clk: sunxi-ng: Add support for H6 DE3 clocks Jernej Skrabec
2018-10-07  9:38 ` [PATCH v2 07/29] dt-bindings: display: sun4i-drm: Add H6 display engine compatibles Jernej Skrabec
2018-10-07  9:38 ` [PATCH v2 08/29] drm/sun4i: Add compatible for H6 display engine Jernej Skrabec
2018-10-07  9:38 ` [PATCH v2 09/29] drm/sun4i: Rework DE2 register defines Jernej Skrabec
2018-10-07  9:38 ` [PATCH v2 10/29] drm/sun4i: Rename DE2 registers related macros Jernej Skrabec
2018-10-08 10:18   ` Maxime Ripard
2018-10-08 14:28     ` Jernej Škrabec
2018-10-09 15:53       ` Maxime Ripard
2018-10-07  9:38 ` [PATCH v2 11/29] drm/sun4i: Fix DE2 mixer size Jernej Skrabec
2018-10-07  9:38 ` [PATCH v2 12/29] drm/sun4i: Disable unused DE2 sub-engines Jernej Skrabec
2018-10-07  9:38 ` [PATCH v2 13/29] drm/sun4i: Add basic support for DE3 Jernej Skrabec
2018-10-07  9:38 ` [PATCH v2 14/29] drm/sun4i: Add support for H6 DE3 mixer 0 Jernej Skrabec
2018-10-07  9:38 ` [PATCH v2 15/29] drm/bridge/synopsys: dw-hdmi: Enable workaround for v2.12a Jernej Skrabec
2018-10-09 17:40   ` Laurent Pinchart
2018-10-09 17:56     ` Ilia Mirkin
2018-10-09 21:23       ` Russell King - ARM Linux
2018-10-15 17:43     ` [linux-sunxi] " Jernej Škrabec
2018-10-07  9:38 ` [PATCH v2 16/29] drm/sun4i: Not all DW HDMI controllers has scrambled addresses Jernej Skrabec
2018-10-07  9:38 ` [PATCH v2 17/29] drm/sun4i: dw-hdmi: Make mode_valid function configurable Jernej Skrabec
2018-10-07  9:38 ` [PATCH v2 18/29] drm/sun4i: dw-hdmi: Add quirk for setting TMDS clock Jernej Skrabec
2018-10-08  9:14   ` Maxime Ripard
2018-10-08 15:09     ` Jernej Škrabec
2018-10-09  9:14       ` Maxime Ripard
2018-10-07  9:38 ` [PATCH v2 19/29] dt-bindings: display: sunxi: add DT binding for Allwinner H6 DW HDMI Jernej Skrabec
2018-10-07  9:38 ` [PATCH v2 20/29] drm/sun4i: Add support for H6 DW HDMI controller Jernej Skrabec
2018-10-07  9:38 ` [PATCH v2 21/29] drm/sun4i: dw-hdmi-phy: Reorder quirks by family Jernej Skrabec
2018-10-07  9:38 ` Jernej Skrabec [this message]
2018-10-07  9:38 ` [PATCH v2 23/29] drm/sun4i: Add support for H6 HDMI PHY Jernej Skrabec
2018-10-07  9:39 ` [PATCH v2 24/29] drm/sun4i: Initialize registers in tcon-top driver Jernej Skrabec
2018-10-07  9:39 ` [PATCH v2 25/29] drm: sun4i: add quirks for TCON TOP Jernej Skrabec
2018-10-08  8:51   ` Maxime Ripard
2018-10-08  9:06     ` Chen-Yu Tsai
2018-10-08 10:20       ` Maxime Ripard
2018-10-08 10:50         ` Chen-Yu Tsai
2018-10-08 12:33           ` Maxime Ripard
2018-10-08 13:10             ` Chen-Yu Tsai
2018-10-08 14:30     ` Jernej Škrabec
2018-10-07  9:39 ` [PATCH v2 26/29] dt-bindings: display: sun4i-drm: document H6 " Jernej Skrabec
2018-10-07  9:39 ` [PATCH v2 27/29] drm: sun4i: add support for " Jernej Skrabec
2018-10-07  9:39 ` [PATCH v2 28/29] arm64: dts: allwinner: h6: Add HDMI pipeline Jernej Skrabec
2018-10-07  9:39 ` [PATCH v2 29/29] arm64: dts: allwinner: h6: Enable HDMI output on Pine H64 board Jernej Skrabec
2018-10-07  9:50 ` [linux-sunxi] [PATCH v2 00/29] Allwinner H6 DE3 and HDMI support Jernej Škrabec

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181007093905.11253-23-jernej.skrabec@siol.net \
    --to=jernej.skrabec@siol.net \
    --cc=Laurent.pinchart@ideasonboard.com \
    --cc=a.hajda@samsung.com \
    --cc=airlied@linux.ie \
    --cc=architt@codeaurora.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sunxi@googlegroups.com \
    --cc=maxime.ripard@bootlin.com \
    --cc=robh+dt@kernel.org \
    --cc=sboyd@kernel.org \
    --cc=wens@csie.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).