linux-clk.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Joseph Lo <josephl@nvidia.com>
To: Thierry Reding <thierry.reding@gmail.com>,
	Peter De Schrijver <pdeschrijver@nvidia.com>,
	Jonathan Hunter <jonathanh@nvidia.com>,
	"Rob Herring" <robh+dt@kernel.org>,
	Stephen Boyd <sboyd@kernel.org>
Cc: <linux-arm-kernel@lists.infradead.org>,
	<linux-tegra@vger.kernel.org>, <linux-clk@vger.kernel.org>,
	<devicetree@vger.kernel.org>, Joseph Lo <josephl@nvidia.com>
Subject: [PATCH V3 1/8] dt-bindings: memory: tegra: Add external memory controller binding for Tegra210
Date: Fri, 10 May 2019 16:47:12 +0800	[thread overview]
Message-ID: <20190510084719.18902-2-josephl@nvidia.com> (raw)
In-Reply-To: <20190510084719.18902-1-josephl@nvidia.com>

Add the binding document for the external memory controller (EMC) which
communicates with external LPDDR4 devices. It includes the bindings of
the EMC node and a sub-node of EMC table which under the reserved memory
node. The EMC table contains the data of the rates that EMC supported.

Signed-off-by: Joseph Lo <josephl@nvidia.com>
---
v3:
- drop the bindings of EMC table
- add memory-region and reserved-memory node for EMC table
---
 .../nvidia,tegra210-emc.txt                   | 55 +++++++++++++++++++
 1 file changed, 55 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/memory-controllers/nvidia,tegra210-emc.txt

diff --git a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra210-emc.txt b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra210-emc.txt
new file mode 100644
index 000000000000..d65aeef2329c
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra210-emc.txt
@@ -0,0 +1,55 @@
+NVIDIA Tegra210 SoC EMC (external memory controller)
+====================================================
+
+Device node
+===========
+Required properties :
+- compatible : should be "nvidia,tegra210-emc".
+- reg : physical base address and length of the controller's registers.
+- clocks : phandles of the possible source clocks.
+- clock-names : names of the possible source clocks.
+- interrupts : Should contain the EMC general interrupt.
+- memory-region : phandle to the reserved memory (see
+  Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt) which
+  contains a sub-node of EMC table.
+- nvidia,memory-controller : phandle of the memory controller.
+
+Reserved memory node
+====================
+Should contain a sub-node of EMC table with required properties:
+- compatible : should be "nvidia,tegra210-emc-table".
+- reg : physical address and length of the location of EMC table.
+
+Example:
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		emc_table: emc-table@8be00000 {
+			compatible = "nvidia,tegra210-emc-table";
+			reg = <0x0 0x8be00000 0x0 0x10000>;
+			status = "okay";
+		};
+	};
+
+	external-memory-controller@7001b000 {
+		compatible = "nvidia,tegra210-emc";
+		reg = <0x0 0x7001b000 0x0 0x1000>,
+		      <0x0 0x7001e000 0x0 0x1000>,
+		      <0x0 0x7001f000 0x0 0x1000>;
+		clocks = <&tegra_car TEGRA210_CLK_EMC>,
+			 <&tegra_car TEGRA210_CLK_PLL_M>,
+			 <&tegra_car TEGRA210_CLK_PLL_C>,
+			 <&tegra_car TEGRA210_CLK_PLL_P>,
+			 <&tegra_car TEGRA210_CLK_CLK_M>,
+			 <&tegra_car TEGRA210_CLK_PLL_M_UD>,
+			 <&tegra_car TEGRA210_CLK_PLL_MB_UD>,
+			 <&tegra_car TEGRA210_CLK_PLL_MB>,
+			 <&tegra_car TEGRA210_CLK_PLL_P_UD>;
+		clock-names = "emc", "pll_m", "pll_c", "pll_p", "clk_m",
+			      "pll_m_ud", "pll_mb_ud", "pll_mb", "pll_p_ud";
+		interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+		memory-region = <&emc_table>;
+		nvidia,memory-controller = <&mc>;
+	};
-- 
2.21.0


  reply	other threads:[~2019-05-10  8:47 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-05-10  8:47 [PATCH V3 0/8] Add EMC scaling support for Tegra210 Joseph Lo
2019-05-10  8:47 ` Joseph Lo [this message]
2019-05-14 16:28   ` [PATCH V3 1/8] dt-bindings: memory: tegra: Add external memory controller binding " Dmitry Osipenko
2019-05-15  7:17     ` Joseph Lo
2019-05-15 13:50       ` Dmitry Osipenko
2019-05-16  9:01         ` Joseph Lo
2019-05-16 14:39           ` Dmitry Osipenko
2019-05-10  8:47 ` [PATCH V3 2/8] clk: tegra: Add PLLP_UD and PLLMB_UD " Joseph Lo
2019-05-10  8:47 ` [PATCH V3 3/8] clk: tegra: Export functions for EMC clock scaling Joseph Lo
2019-05-14 16:29   ` Dmitry Osipenko
2019-05-15  7:25     ` Joseph Lo
2019-05-10  8:47 ` [PATCH V3 4/8] memory: tegra: Add Tegra210 EMC clock driver Joseph Lo
2019-05-13 16:54   ` Dmitry Osipenko
2019-05-14  9:22     ` Joseph Lo
2019-05-14 17:04   ` Dmitry Osipenko
2019-05-15  8:42     ` Joseph Lo
2019-05-15 15:25       ` Dmitry Osipenko
2019-05-16  7:52         ` Joseph Lo
2019-05-16 14:29           ` Dmitry Osipenko
2019-05-10  8:47 ` [PATCH V3 5/8] memory: tegra: Add EMC scaling support code for Tegra210 Joseph Lo
2019-05-13 17:02   ` Dmitry Osipenko
2019-05-14  8:47     ` Joseph Lo
2019-05-14 16:30   ` Dmitry Osipenko
2019-05-15 14:09   ` Dmitry Osipenko
2019-05-15 15:26   ` Dmitry Osipenko
2019-05-10  8:47 ` [PATCH V3 6/8] memory: tegra: Add EMC scaling sequence " Joseph Lo
2019-05-10  8:47 ` [PATCH V3 7/8] clk: tegra: Remove the old emc_mux clock " Joseph Lo
2019-05-10  8:47 ` [PATCH V3 8/8] arm64: tegra: Add external memory controller node " Joseph Lo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190510084719.18902-2-josephl@nvidia.com \
    --to=josephl@nvidia.com \
    --cc=devicetree@vger.kernel.org \
    --cc=jonathanh@nvidia.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-tegra@vger.kernel.org \
    --cc=pdeschrijver@nvidia.com \
    --cc=robh+dt@kernel.org \
    --cc=sboyd@kernel.org \
    --cc=thierry.reding@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).