Re: [PATCH V2 4/6] clk: qcom: camcc-sm8550: Add camera clock controller driver for SM8550

[Jagadeesh Kona <quic_jkona@quicinc.com>]

Hi Konrad,

On 5/27/2023 1:24 AM, Konrad Dybcio wrote:
> 
> 
> On 25.05.2023 19:21, Jagadeesh Kona wrote:
>> Add support for the camera clock controller for camera clients to be
>> able to request for camcc clocks on SM8550 platform.
>>
>> Co-developed-by: Taniya Das <quic_tdas@quicinc.com>
>> Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
>> Signed-off-by: Jagadeesh Kona <quic_jkona@quicinc.com>
>> ---
>> Changes since V1:
>>   - Sorted the PLL names in proper order
>>   - Updated all PLL configurations to lower case hex
>>   - Reused evo ops instead of adding new ops for ole pll
>>   - Moved few clocks to separate patch to fix patch too long error
> The patches end up in the maintainers' inboxes, so it's fine to send
> it as one.
> 
> Konrad
Okay, thanks for the info. This patch didn't make it to the patch list 
in V1, since the length is too long. So we split this into 2 patches
considering Dmitry's comments. Since we already split this patch, we 
would like to keep it this way, since it is coming properly in the patch 
list now.

>>
>>   drivers/clk/qcom/Kconfig        |    7 +
>>   drivers/clk/qcom/Makefile       |    1 +
>>   drivers/clk/qcom/camcc-sm8550.c | 3405 +++++++++++++++++++++++++++++++
>>   3 files changed, 3413 insertions(+)
>>   create mode 100644 drivers/clk/qcom/camcc-sm8550.c
>>

Thanks & Regards,
Jagadeesh