Re: [PATCH v4 0/7] Add SD/MMC driver for Actions Semi S900 SoC

From: Ulf Hansson <ulf.hansson@linaro.org>
To: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: "Andreas Färber" <afaerber@suse.de>,
	"Rob Herring" <robh+dt@kernel.org>,
	"Stephen Boyd" <sboyd@kernel.org>,
	"Linux ARM" <linux-arm-kernel@lists.infradead.org>,
	"linux-mmc@vger.kernel.org" <linux-mmc@vger.kernel.org>,
	"Linux Kernel Mailing List" <linux-kernel@vger.kernel.org>,
	DTML <devicetree@vger.kernel.org>,
	thomas.liau@actions-semi.com, linux-actions@lists.infradead.org,
	"Linus Walleij" <linus.walleij@linaro.org>,
	linux-clk <linux-clk@vger.kernel.org>
Subject: Re: [PATCH v4 0/7] Add SD/MMC driver for Actions Semi S900 SoC
Date: Thu, 3 Oct 2019 12:01:18 +0200	[thread overview]
Message-ID: <CAPDyKFqsZ1mZ53b9wLruATzi+ymFrUCLhxzx7NFUq48p5w0Gtw@mail.gmail.com> (raw)
In-Reply-To: <20190916154546.24982-1-manivannan.sadhasivam@linaro.org>

On Mon, 16 Sep 2019 at 17:46, Manivannan Sadhasivam
<manivannan.sadhasivam@linaro.org> wrote:
>
> Hello,
>
> This patchset adds SD/MMC driver for Actions Semi S900 SoC from Owl
> family SoCs. There are 4 SD/MMC controller present in this SoC but
> only 2 are enabled currently for Bubblegum96 board to access uSD and
> onboard eMMC. SDIO support for this driver is not currently implemented.
>
> Note: Currently, driver uses 2 completion mechanisms for maintaining
> the coherency between SDC and DMA interrupts and I know that it is not
> efficient. Hence, I'd like to hear any suggestions for reimplementing
> the logic if anyone has.
>
> With this driver, this patchset also fixes one clk driver issue and enables
> the Actions Semi platform in ARM64 defconfig.
>
> Thanks,
> Mani
>
> Changes in v4:
>
> * Incorporated review comments from Rob on dt binding
>
> Changes in v3:
>
> * Incorporated a review comment from Andreas on board dts patch
> * Modified the MAINTAINERS entry for devicetree YAML binding
>
> Changes in v2:
>
> * Converted the devicetree bindings to YAML
> * Misc changes to bubblegum devicetree as per the review from Andreas
> * Dropped the read/write wrappers and renamed all functions to use owl-
>   prefix as per the review from Ulf
> * Renamed clk_val_best to owl_clk_val_best and added Reviewed-by tag
>   from Stephen
>
> Manivannan Sadhasivam (7):
>   clk: actions: Fix factor clk struct member access
>   dt-bindings: mmc: Add Actions Semi SD/MMC/SDIO controller binding
>   arm64: dts: actions: Add MMC controller support for S900
>   arm64: dts: actions: Add uSD and eMMC support for Bubblegum96
>   mmc: Add Actions Semi Owl SoCs SD/MMC driver
>   MAINTAINERS: Add entry for Actions Semi SD/MMC driver and binding
>   arm64: configs: Enable Actions Semi platform in defconfig
>
>  .../devicetree/bindings/mmc/owl-mmc.yaml      |  59 ++
>  MAINTAINERS                                   |   2 +
>  .../boot/dts/actions/s900-bubblegum-96.dts    |  62 ++
>  arch/arm64/boot/dts/actions/s900.dtsi         |  45 ++
>  arch/arm64/configs/defconfig                  |   1 +
>  drivers/clk/actions/owl-factor.c              |   7 +-
>  drivers/mmc/host/Kconfig                      |   8 +
>  drivers/mmc/host/Makefile                     |   1 +
>  drivers/mmc/host/owl-mmc.c                    | 696 ++++++++++++++++++
>  9 files changed, 877 insertions(+), 4 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/mmc/owl-mmc.yaml
>  create mode 100644 drivers/mmc/host/owl-mmc.c
>
> --
> 2.17.1
>

I have picked up the mmc patches for next and as Stephen picked the
clock patch, the rest are now for arm-soc, I guess!?

Kind regards
Uffe