From: Ben Widawsky <ben.widawsky@intel.com>
To: linux-cxl@vger.kernel.org
Cc: Ben Widawsky <ben.widawsky@intel.com>,
Alison Schofield <alison.schofield@intel.com>,
Dan Williams <dan.j.williams@intel.com>,
Ira Weiny <ira.weiny@intel.com>,
Jonathan Cameron <Jonathan.Cameron@Huawei.com>,
Vishal Verma <vishal.l.verma@intel.com>
Subject: [PATCH 03/13] cxl/core: Ignore interleave when adding decoders
Date: Thu, 2 Sep 2021 12:50:07 -0700 [thread overview]
Message-ID: <20210902195017.2516472-4-ben.widawsky@intel.com> (raw)
In-Reply-To: <20210902195017.2516472-1-ben.widawsky@intel.com>
Decoders will be added to the bus either already active (committed in
spec parlance), or inactive. From the driver perspective, the set of
devices comprising the former are those which are brought up by system
firmware; decoders that implement: volatile regions, persistent regions,
or platform specific (ie. CFMWS) constraints. Such devices have a given
interleave programming already in place. Inactive decoders on the other
hand, do not have any interleave programming in place. The set of
devices comprising that are hostbridges, switches, and endpoint devices.
Allow adding inactive decoders by removing this check.
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
---
drivers/cxl/core/bus.c | 3 ---
1 file changed, 3 deletions(-)
diff --git a/drivers/cxl/core/bus.c b/drivers/cxl/core/bus.c
index 9d98dd50d424..8d5061b0794d 100644
--- a/drivers/cxl/core/bus.c
+++ b/drivers/cxl/core/bus.c
@@ -532,9 +532,6 @@ int cxl_decoder_add(struct device *host, struct cxl_decoder *cxld,
if (IS_ERR(cxld))
return PTR_ERR(cxld);
- if (cxld->interleave_ways < 1)
- return -EINVAL;
-
port = to_cxl_port(cxld->dev.parent);
device_lock(&port->dev);
if (list_empty(&port->dports)) {
--
2.33.0
next prev parent reply other threads:[~2021-09-02 19:50 UTC|newest]
Thread overview: 60+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-09-02 19:50 [PATCH 00/13] Enumerate midlevel and endpoint decoders Ben Widawsky
2021-09-02 19:50 ` [PATCH 01/13] Documentation/cxl: Add bus internal docs Ben Widawsky
2021-09-03 14:05 ` Jonathan Cameron
2021-09-10 18:20 ` Dan Williams
2021-09-02 19:50 ` [PATCH 02/13] cxl/core/bus: Add kernel docs for decoder ops Ben Widawsky
2021-09-03 14:17 ` Jonathan Cameron
2021-09-10 18:51 ` Dan Williams
2021-09-11 17:25 ` Ben Widawsky
2021-09-02 19:50 ` Ben Widawsky [this message]
2021-09-03 14:25 ` [PATCH 03/13] cxl/core: Ignore interleave when adding decoders Jonathan Cameron
2021-09-10 19:00 ` Dan Williams
2021-09-11 17:30 ` Ben Widawsky
2021-09-02 19:50 ` [PATCH 04/13] cxl: Introduce endpoint decoders Ben Widawsky
2021-09-03 14:35 ` Jonathan Cameron
2021-09-13 16:19 ` Ben Widawsky
2021-09-10 19:19 ` Dan Williams
2021-09-13 16:11 ` Ben Widawsky
2021-09-13 22:07 ` Dan Williams
2021-09-13 23:19 ` Ben Widawsky
2021-09-14 21:16 ` Dan Williams
2021-09-02 19:50 ` [PATCH 05/13] cxl/pci: Disambiguate cxl_pci further from cxl_mem Ben Widawsky
2021-09-03 14:45 ` Jonathan Cameron
2021-09-10 19:27 ` Dan Williams
2021-09-02 19:50 ` [PATCH 06/13] cxl/mem: Introduce cxl_mem driver Ben Widawsky
2021-09-03 14:52 ` Jonathan Cameron
2021-09-10 21:32 ` Dan Williams
2021-09-13 16:46 ` Ben Widawsky
2021-09-13 19:37 ` Dan Williams
2021-09-02 19:50 ` [PATCH 07/13] cxl/memdev: Determine CXL.mem capability Ben Widawsky
2021-09-03 15:21 ` Jonathan Cameron
2021-09-13 19:01 ` Ben Widawsky
2021-09-10 21:59 ` Dan Williams
2021-09-13 22:10 ` Ben Widawsky
2021-09-14 22:42 ` Dan Williams
2021-09-14 22:55 ` Ben Widawsky
2021-09-02 19:50 ` [PATCH 08/13] cxl/mem: Add memdev as a port Ben Widawsky
2021-09-03 15:31 ` Jonathan Cameron
2021-09-10 23:09 ` Dan Williams
2021-09-02 19:50 ` [PATCH 09/13] cxl/pci: Retain map information in cxl_mem_probe Ben Widawsky
2021-09-10 23:12 ` Dan Williams
2021-09-10 23:45 ` Dan Williams
2021-09-02 19:50 ` [PATCH 10/13] cxl/core: Map component registers for ports Ben Widawsky
2021-09-02 22:41 ` Ben Widawsky
2021-09-02 22:42 ` Ben Widawsky
2021-09-03 16:14 ` Jonathan Cameron
2021-09-10 23:52 ` Dan Williams
2021-09-13 8:29 ` Jonathan Cameron
2021-09-10 23:44 ` Dan Williams
2021-09-02 19:50 ` [PATCH 11/13] cxl/core: Convert decoder range to resource Ben Widawsky
2021-09-03 16:16 ` Jonathan Cameron
2021-09-11 0:59 ` Dan Williams
2021-09-02 19:50 ` [PATCH 12/13] cxl/core/bus: Enumerate all HDM decoders Ben Widawsky
2021-09-03 17:43 ` Jonathan Cameron
2021-09-11 1:37 ` Dan Williams
2021-09-11 1:13 ` Dan Williams
2021-09-02 19:50 ` [PATCH 13/13] cxl/mem: Enumerate switch decoders Ben Widawsky
2021-09-03 17:56 ` Jonathan Cameron
2021-09-13 22:12 ` Ben Widawsky
2021-09-14 23:31 ` Dan Williams
2021-09-10 18:15 ` [PATCH 00/13] Enumerate midlevel and endpoint decoders Dan Williams
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210902195017.2516472-4-ben.widawsky@intel.com \
--to=ben.widawsky@intel.com \
--cc=Jonathan.Cameron@Huawei.com \
--cc=alison.schofield@intel.com \
--cc=dan.j.williams@intel.com \
--cc=ira.weiny@intel.com \
--cc=linux-cxl@vger.kernel.org \
--cc=vishal.l.verma@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).