From: Sebastian Reichel <sre@debian.org>
To: Sebastian Reichel <sre@ring0.de>,
Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Grant Likely <grant.likely@linaro.org>,
Rob Herring <rob.herring@calxeda.com>,
Sebastian Reichel <sre@debian.org>,
Peter Ujfalusi <peter.ujfalusi@ti.com>,
Sachin Kamat <sachin.kamat@linaro.org>,
linux-input@vger.kernel.org, linux-kernel@vger.kernel.org,
devicetree@vger.kernel.org
Subject: [PATCHv4 1/3] Input: twl4030-pwrbutton - add device tree support
Date: Wed, 23 Oct 2013 19:54:10 +0200 [thread overview]
Message-ID: <1382550852-11508-2-git-send-email-sre@debian.org> (raw)
In-Reply-To: <1382550852-11508-1-git-send-email-sre@debian.org>
Add device tree support for twl4030 power button driver.
Signed-off-by: Sebastian Reichel <sre@debian.org>
---
.../devicetree/bindings/input/twl4030-pwrbutton.txt | 13 +++++++++++++
drivers/input/misc/twl4030-pwrbutton.c | 16 ++++++++++++----
2 files changed, 25 insertions(+), 4 deletions(-)
create mode 100644 Documentation/devicetree/bindings/input/twl4030-pwrbutton.txt
diff --git a/Documentation/devicetree/bindings/input/twl4030-pwrbutton.txt b/Documentation/devicetree/bindings/input/twl4030-pwrbutton.txt
new file mode 100644
index 0000000..945ec74
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/twl4030-pwrbutton.txt
@@ -0,0 +1,13 @@
+* TWL4030's pwrbutton device tree bindings
+
+Required SoC Specific Properties:
+- compatible: should be one of the following
+ - "ti,twl4030-pwrbutton": For controllers compatible with twl4030
+- interrupt: should be one of the following
+ - <8>: For controllers compatible with twl4030
+
+Example:
+ twl_pwrbutton: pwrbutton {
+ compatible = "ti,twl4030-pwrbutton";
+ interrupts = <8>;
+ };
diff --git a/drivers/input/misc/twl4030-pwrbutton.c b/drivers/input/misc/twl4030-pwrbutton.c
index b9a05fd..a3a0fe3 100644
--- a/drivers/input/misc/twl4030-pwrbutton.c
+++ b/drivers/input/misc/twl4030-pwrbutton.c
@@ -52,7 +52,7 @@ static irqreturn_t powerbutton_irq(int irq, void *_pwr)
return IRQ_HANDLED;
}
-static int __init twl4030_pwrbutton_probe(struct platform_device *pdev)
+static int twl4030_pwrbutton_probe(struct platform_device *pdev)
{
struct input_dev *pwr;
int irq = platform_get_irq(pdev, 0);
@@ -106,16 +106,24 @@ static int __exit twl4030_pwrbutton_remove(struct platform_device *pdev)
return 0;
}
+#if IS_ENABLED(CONFIG_OF)
+static const struct of_device_id twl4030_pwrbutton_dt_match_table[] = {
+ { .compatible = "ti,twl4030-pwrbutton" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, twl4030_pwrbutton_dt_match_table);
+#endif
+
static struct platform_driver twl4030_pwrbutton_driver = {
+ .probe = twl4030_pwrbutton_probe,
.remove = __exit_p(twl4030_pwrbutton_remove),
.driver = {
.name = "twl4030_pwrbutton",
.owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(twl4030_pwrbutton_dt_match_table),
},
};
-
-module_platform_driver_probe(twl4030_pwrbutton_driver,
- twl4030_pwrbutton_probe);
+module_platform_driver(twl4030_pwrbutton_driver);
MODULE_ALIAS("platform:twl4030_pwrbutton");
MODULE_DESCRIPTION("Triton2 Power Button");
--
1.8.4.rc3
next prev parent reply other threads:[~2013-10-23 17:54 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-10-23 17:54 [PATCHv4 0/3] DT Support for TWL4030 power button Sebastian Reichel
2013-10-23 17:54 ` Sebastian Reichel [this message]
2013-10-24 7:47 ` [PATCHv4 1/3] Input: twl4030-pwrbutton - add device tree support Florian Vaussard
2013-10-24 8:38 ` Sebastian Reichel
2013-10-24 9:16 ` Florian Vaussard
2013-10-23 17:54 ` [PATCHv4 2/3] Input: twl4030-pwrbutton: use dev_err for errors Sebastian Reichel
2013-10-23 18:17 ` Joe Perches
2013-10-23 19:31 ` Sebastian Reichel
[not found] ` <20131023193112.GB30437-SfvFxonMDyemK9LvCR3Hrw@public.gmane.org>
2013-10-23 19:38 ` Joe Perches
2013-10-23 17:54 ` [PATCHv4 3/3] Input: twl4030-pwrbutton: simplify driver using devm_* Sebastian Reichel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1382550852-11508-2-git-send-email-sre@debian.org \
--to=sre@debian.org \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.torokhov@gmail.com \
--cc=grant.likely@linaro.org \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=peter.ujfalusi@ti.com \
--cc=rob.herring@calxeda.com \
--cc=sachin.kamat@linaro.org \
--cc=sre@ring0.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).