From mboxrd@z Thu Jan 1 00:00:00 1970 From: Douglas Anderson Subject: [PATCH 4/4] ARM: dts: rockchip: Point rk3288 dwc2 usb at phy port reset Date: Fri, 23 Oct 2015 11:28:11 -0700 Message-ID: <1445624891-31680-5-git-send-email-dianders@chromium.org> References: <1445624891-31680-1-git-send-email-dianders@chromium.org> Return-path: In-Reply-To: <1445624891-31680-1-git-send-email-dianders@chromium.org> Sender: linux-kernel-owner@vger.kernel.org To: heiko@sntech.de, kishon@ti.com, johnyoun@synopsys.com, balbi@ti.com Cc: gregkh@linuxfoundation.org, lyz@rock-chips.com, wulf@rock-chips.com, Douglas Anderson , robh+dt@kernel.org, pawel.moll@arm.com, mark.rutland@arm.com, ijc+devicetree@hellion.org.uk, galak@codeaurora.org, linux@arm.linux.org.uk, linux-arm-kernel@lists.infradead.org, linux-rockchip@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org List-Id: devicetree@vger.kernel.org The "host1" port (AKA the dwc2 port that isn't the OTG port) on rk3288 has a hardware errata that causes everything to get confused when we get a remote wakeup. It appears that the "port reset" bit that's in the USB phy (located in the rk3288 GRF) fixes things up and appears safe to do. We recently added code to the PHY to expose this reset and code to dwc2 to use it, so now let's hook things up. Note that we add the PHY port reset to both dwc2 controllers even though only one has the errata in case we find some other use for this reset that's unrelated to the current hardware errata. Only the host port gets the quirk property, though. Signed-off-by: Douglas Anderson --- arch/arm/boot/dts/rk3288.dtsi | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi index 4f76805..03de41d 100644 --- a/arch/arm/boot/dts/rk3288.dtsi +++ b/arch/arm/boot/dts/rk3288.dtsi @@ -496,6 +496,9 @@ dr_mode = "host"; phys = <&usbphy2>; phy-names = "usb2-phy"; + resets = <&usbphy2>; + reset-names = "phy-port-reset"; + snps,need-phy-port-reset-on-wake; status = "disabled"; }; @@ -513,6 +516,8 @@ g-use-dma; phys = <&usbphy0>; phy-names = "usb2-phy"; + resets = <&usbphy0>; + reset-names = "phy-port-reset"; status = "disabled"; }; -- 2.6.0.rc2.230.g3dd15c0