From: Marco Franchi <marcofrk@gmail.com>
To: shawnguo@kernel.org, robh+dt@kernel.org
Cc: devicetree@vger.kernel.org, marcofrk@gmail.com,
linux-kernel@vger.kernel.org,
Marco Franchi <marco.franchi@nxp.com>,
festevam@gmail.com, linux-arm-kernel@lists.infradead.org,
LW@karo-electronics.de
Subject: [PATCH v3 2/3] ARM: dts: imx: Remove empty memory size nodes
Date: Wed, 24 Jan 2018 11:22:13 -0200 [thread overview]
Message-ID: <1516800134-5018-2-git-send-email-marcofrk@gmail.com> (raw)
In-Reply-To: <1516800134-5018-1-git-send-email-marcofrk@gmail.com>
Remove the empty reg property from the SoC dtsi files in order to avoid
duplicate memory nodes when the correct size is passed in board dts files.
Signed-off-by: Marco Franchi <marco.franchi@nxp.com>
---
Change since v2:
-none
arch/arm/boot/dts/imx1.dtsi | 2 +-
arch/arm/boot/dts/imx23.dtsi | 2 +-
arch/arm/boot/dts/imx25.dtsi | 2 +-
arch/arm/boot/dts/imx27.dtsi | 2 +-
arch/arm/boot/dts/imx28.dtsi | 2 +-
arch/arm/boot/dts/imx31.dtsi | 2 +-
arch/arm/boot/dts/imx35.dtsi | 2 +-
arch/arm/boot/dts/imx50.dtsi | 2 +-
arch/arm/boot/dts/imx51.dtsi | 2 +-
arch/arm/boot/dts/imx53.dtsi | 2 +-
arch/arm/boot/dts/imx6qdl.dtsi | 2 +-
arch/arm/boot/dts/imx6sl.dtsi | 2 +-
arch/arm/boot/dts/imx6sx.dtsi | 2 +-
arch/arm/boot/dts/imx6ul.dtsi | 2 +-
arch/arm/boot/dts/imx7s.dtsi | 2 +-
15 files changed, 15 insertions(+), 15 deletions(-)
diff --git a/arch/arm/boot/dts/imx1.dtsi b/arch/arm/boot/dts/imx1.dtsi
index 20f6565..f7b9edf 100644
--- a/arch/arm/boot/dts/imx1.dtsi
+++ b/arch/arm/boot/dts/imx1.dtsi
@@ -25,7 +25,7 @@
* Also for U-Boot there must be a pre-existing /memory node.
*/
chosen {};
- memory { device_type = "memory"; reg = <0 0>; };
+ memory { device_type = "memory"; };
aliases {
gpio0 = &gpio1;
diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi
index 10d57f9..0aa111e 100644
--- a/arch/arm/boot/dts/imx23.dtsi
+++ b/arch/arm/boot/dts/imx23.dtsi
@@ -23,7 +23,7 @@
* Also for U-Boot there must be a pre-existing /memory node.
*/
chosen {};
- memory { device_type = "memory"; reg = <0 0>; };
+ memory { device_type = "memory"; };
aliases {
gpio0 = &gpio0;
diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi
index 9445f8e..9725705 100644
--- a/arch/arm/boot/dts/imx25.dtsi
+++ b/arch/arm/boot/dts/imx25.dtsi
@@ -22,7 +22,7 @@
* Also for U-Boot there must be a pre-existing /memory node.
*/
chosen {};
- memory { device_type = "memory"; reg = <0 0>; };
+ memory { device_type = "memory"; };
aliases {
ethernet0 = &fec;
diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi
index 15d85f1..6585b00 100644
--- a/arch/arm/boot/dts/imx27.dtsi
+++ b/arch/arm/boot/dts/imx27.dtsi
@@ -26,7 +26,7 @@
* Also for U-Boot there must be a pre-existing /memory node.
*/
chosen {};
- memory { device_type = "memory"; reg = <0 0>; };
+ memory { device_type = "memory"; };
aliases {
ethernet0 = &fec;
diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
index e52e05c..42d9a89 100644
--- a/arch/arm/boot/dts/imx28.dtsi
+++ b/arch/arm/boot/dts/imx28.dtsi
@@ -24,7 +24,7 @@
* Also for U-Boot there must be a pre-existing /memory node.
*/
chosen {};
- memory { device_type = "memory"; reg = <0 0>; };
+ memory { device_type = "memory"; };
aliases {
ethernet0 = &mac0;
diff --git a/arch/arm/boot/dts/imx31.dtsi b/arch/arm/boot/dts/imx31.dtsi
index a720314..ebc3f2d 100644
--- a/arch/arm/boot/dts/imx31.dtsi
+++ b/arch/arm/boot/dts/imx31.dtsi
@@ -19,7 +19,7 @@
* Also for U-Boot there must be a pre-existing /memory node.
*/
chosen {};
- memory { device_type = "memory"; reg = <0 0>; };
+ memory { device_type = "memory"; };
aliases {
serial0 = &uart1;
diff --git a/arch/arm/boot/dts/imx35.dtsi b/arch/arm/boot/dts/imx35.dtsi
index e08c0c1..bf343195 100644
--- a/arch/arm/boot/dts/imx35.dtsi
+++ b/arch/arm/boot/dts/imx35.dtsi
@@ -20,7 +20,7 @@
* Also for U-Boot there must be a pre-existing /memory node.
*/
chosen {};
- memory { device_type = "memory"; reg = <0 0>; };
+ memory { device_type = "memory"; };
aliases {
ethernet0 = &fec;
diff --git a/arch/arm/boot/dts/imx50.dtsi b/arch/arm/boot/dts/imx50.dtsi
index 35955e6..7954e79 100644
--- a/arch/arm/boot/dts/imx50.dtsi
+++ b/arch/arm/boot/dts/imx50.dtsi
@@ -25,7 +25,7 @@
* Also for U-Boot there must be a pre-existing /memory node.
*/
chosen {};
- memory { device_type = "memory"; reg = <0 0>; };
+ memory { device_type = "memory"; };
aliases {
ethernet0 = &fec;
diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi
index 00d30bd..5d390a6 100644
--- a/arch/arm/boot/dts/imx51.dtsi
+++ b/arch/arm/boot/dts/imx51.dtsi
@@ -26,7 +26,7 @@
* Also for U-Boot there must be a pre-existing /memory node.
*/
chosen {};
- memory { device_type = "memory"; reg = <0 0>; };
+ memory { device_type = "memory"; };
aliases {
ethernet0 = &fec;
diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi
index 1040251..7d647d0 100644
--- a/arch/arm/boot/dts/imx53.dtsi
+++ b/arch/arm/boot/dts/imx53.dtsi
@@ -26,7 +26,7 @@
* Also for U-Boot there must be a pre-existing /memory node.
*/
chosen {};
- memory { device_type = "memory"; reg = <0 0>; };
+ memory { device_type = "memory"; };
aliases {
ethernet0 = &fec;
diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
index 59ff866..0c70ea8 100644
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
@@ -23,7 +23,7 @@
* Also for U-Boot there must be a pre-existing /memory node.
*/
chosen {};
- memory { device_type = "memory"; reg = <0 0>; };
+ memory { device_type = "memory"; };
aliases {
ethernet0 = &fec;
diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi
index ae8df3c..ab6a7e2 100644
--- a/arch/arm/boot/dts/imx6sl.dtsi
+++ b/arch/arm/boot/dts/imx6sl.dtsi
@@ -21,7 +21,7 @@
* Also for U-Boot there must be a pre-existing /memory node.
*/
chosen {};
- memory { device_type = "memory"; reg = <0 0>; };
+ memory { device_type = "memory"; };
aliases {
ethernet0 = &fec;
diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi
index fd78793..c486791 100644
--- a/arch/arm/boot/dts/imx6sx.dtsi
+++ b/arch/arm/boot/dts/imx6sx.dtsi
@@ -22,7 +22,7 @@
* Also for U-Boot there must be a pre-existing /memory node.
*/
chosen {};
- memory { device_type = "memory"; reg = <0 0>; };
+ memory { device_type = "memory"; };
aliases {
can0 = &flexcan1;
diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi
index 5d6c3ba..c6515a3 100644
--- a/arch/arm/boot/dts/imx6ul.dtsi
+++ b/arch/arm/boot/dts/imx6ul.dtsi
@@ -22,7 +22,7 @@
* Also for U-Boot there must be a pre-existing /memory node.
*/
chosen {};
- memory { device_type = "memory"; reg = <0 0>; };
+ memory { device_type = "memory"; };
aliases {
ethernet0 = &fec1;
diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi
index 9aa2bb9..ec6292c 100644
--- a/arch/arm/boot/dts/imx7s.dtsi
+++ b/arch/arm/boot/dts/imx7s.dtsi
@@ -58,7 +58,7 @@
* Also for U-Boot there must be a pre-existing /memory node.
*/
chosen {};
- memory { device_type = "memory"; reg = <0 0>; };
+ memory { device_type = "memory"; };
aliases {
gpio0 = &gpio1;
--
2.7.4
next prev parent reply other threads:[~2018-01-24 13:22 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-01-24 13:22 [PATCH v3 1/3] ARM: dts: imx: Pass empty memory size on board dts Marco Franchi
2018-01-24 13:22 ` Marco Franchi [this message]
[not found] ` <1516800134-5018-2-git-send-email-marcofrk-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2018-02-03 0:02 ` [PATCH v3 2/3] ARM: dts: imx: Remove empty memory size nodes Fabio Estevam
[not found] ` <1516800134-5018-1-git-send-email-marcofrk-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2018-01-24 13:22 ` [PATCH v3 3/3] ARM: dts: imx: Add memory node unit name Marco Franchi
[not found] ` <1516800134-5018-3-git-send-email-marcofrk-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2018-02-03 0:03 ` Fabio Estevam
2018-02-03 0:01 ` [PATCH v3 1/3] ARM: dts: imx: Pass empty memory size on board dts Fabio Estevam
2018-02-05 7:31 ` Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1516800134-5018-2-git-send-email-marcofrk@gmail.com \
--to=marcofrk@gmail.com \
--cc=LW@karo-electronics.de \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marco.franchi@nxp.com \
--cc=robh+dt@kernel.org \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).