From: Dennis YC Hsieh <dennis-yc.hsieh@mediatek.com>
To: Rob Herring <robh+dt@kernel.org>,
Matthias Brugger <matthias.bgg@gmail.com>,
Jassi Brar <jassisinghbrar@gmail.com>
Cc: <linux-kernel@vger.kernel.org>,
<linux-mediatek@lists.infradead.org>,
<devicetree@vger.kernel.org>, <wsd_upstream@mediatek.com>,
Bibby Hsieh <bibby.hsieh@mediatek.com>,
CK Hu <ck.hu@mediatek.com>,
Houlong Wei <houlong.wei@mediatek.com>,
<linux-arm-kernel@lists.infradead.org>,
Dennis YC Hsieh <dennis-yc.hsieh@mediatek.com>
Subject: [PATCH v1 08/12] soc: mediatek: cmdq: add read_s function
Date: Thu, 21 Nov 2019 17:12:28 +0800 [thread overview]
Message-ID: <1574327552-11806-9-git-send-email-dennis-yc.hsieh@mediatek.com> (raw)
In-Reply-To: <1574327552-11806-1-git-send-email-dennis-yc.hsieh@mediatek.com>
Add read_s function in cmdq helper functions which support read value from
register or dma physical address into gce internal register.
Signed-off-by: Dennis YC Hsieh <dennis-yc.hsieh@mediatek.com>
---
drivers/soc/mediatek/mtk-cmdq-helper.c | 24 ++++++++++++++++++++++++
include/linux/mailbox/mtk-cmdq-mailbox.h | 1 +
include/linux/soc/mediatek/mtk-cmdq.h | 10 ++++++++++
3 files changed, 35 insertions(+)
diff --git a/drivers/soc/mediatek/mtk-cmdq-helper.c b/drivers/soc/mediatek/mtk-cmdq-helper.c
index 1b074a9..4c90fed 100644
--- a/drivers/soc/mediatek/mtk-cmdq-helper.c
+++ b/drivers/soc/mediatek/mtk-cmdq-helper.c
@@ -23,6 +23,10 @@ struct cmdq_instruction {
union {
u32 value;
u32 mask;
+ struct {
+ u16 arg_c;
+ u16 arg_b;
+ };
};
union {
u16 offset;
@@ -227,6 +231,26 @@ int cmdq_pkt_write_mask(struct cmdq_pkt *pkt, u8 subsys,
}
EXPORT_SYMBOL(cmdq_pkt_write_mask);
+int cmdq_pkt_read_s(struct cmdq_pkt *pkt, phys_addr_t addr, u16 reg_idx)
+{
+ struct cmdq_instruction inst = { {0} };
+ int err;
+ const u16 src_reg_idx = CMDQ_SPR_TEMP;
+
+ err = cmdq_pkt_assign(pkt, src_reg_idx, CMDQ_ADDR_HIGH(addr));
+ if (err < 0)
+ return err;
+
+ inst.op = CMDQ_CODE_READ_S;
+ inst.arg_a_t = CMDQ_REG_TYPE;
+ inst.sop = src_reg_idx;
+ inst.reg_dst = reg_idx;
+ inst.arg_b = CMDQ_ADDR_LOW(addr);
+
+ return cmdq_pkt_append_command(pkt, inst);
+}
+EXPORT_SYMBOL(cmdq_pkt_read_s);
+
int cmdq_pkt_write_s(struct cmdq_pkt *pkt, dma_addr_t addr,
u32 value, u32 mask)
{
diff --git a/include/linux/mailbox/mtk-cmdq-mailbox.h b/include/linux/mailbox/mtk-cmdq-mailbox.h
index 8ef87e1..3f6bc0d 100644
--- a/include/linux/mailbox/mtk-cmdq-mailbox.h
+++ b/include/linux/mailbox/mtk-cmdq-mailbox.h
@@ -59,6 +59,7 @@ enum cmdq_code {
CMDQ_CODE_JUMP = 0x10,
CMDQ_CODE_WFE = 0x20,
CMDQ_CODE_EOC = 0x40,
+ CMDQ_CODE_READ_S = 0x80,
CMDQ_CODE_WRITE_S = 0x90,
CMDQ_CODE_WRITE_S_MASK = 0x91,
CMDQ_CODE_LOGIC = 0xa0,
diff --git a/include/linux/soc/mediatek/mtk-cmdq.h b/include/linux/soc/mediatek/mtk-cmdq.h
index 8dbd046..fb48d3c 100644
--- a/include/linux/soc/mediatek/mtk-cmdq.h
+++ b/include/linux/soc/mediatek/mtk-cmdq.h
@@ -104,6 +104,16 @@ int cmdq_pkt_write_mask(struct cmdq_pkt *pkt, u8 subsys,
u16 offset, u32 value, u32 mask);
/**
+ * cmdq_pkt_read_s() - append read_s command to the CMDQ packet
+ * @pkt: the CMDQ packet
+ * @addr: the physical address of register or dma to read
+ * @reg_idx: the CMDQ internal register ID to cache read data
+ *
+ * Return: 0 for success; else the error code is returned
+ */
+int cmdq_pkt_read_s(struct cmdq_pkt *pkt, phys_addr_t addr, u16 reg_idx);
+
+/**
* cmdq_pkt_write_s() - append write_s command with mask to the CMDQ packet
* @pkt: the CMDQ packet
* @addr: the physical address of register or dma
--
1.7.9.5
next prev parent reply other threads:[~2019-11-21 9:13 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-11-21 9:12 support gce on mt6779 platform Dennis YC Hsieh
2019-11-21 9:12 ` [PATCH v1 01/12] dt-binding: gce: add gce header file for mt6779 Dennis YC Hsieh
2019-11-21 9:12 ` [PATCH v1 02/12] mailbox: cmdq: variablize address shift in platform Dennis YC Hsieh
2019-11-21 9:12 ` [PATCH v1 03/12] mailbox: cmdq: support mt6779 gce platform definition Dennis YC Hsieh
2019-11-21 9:12 ` [PATCH v1 04/12] mailbox: mediatek: cmdq: clear task in channel before shutdown Dennis YC Hsieh
2019-11-21 9:12 ` [PATCH v1 05/12] arm64: dts: add gce node for mt6779 Dennis YC Hsieh
2019-11-21 9:12 ` [PATCH v1 06/12] soc: mediatek: cmdq: add assign function Dennis YC Hsieh
2019-11-25 5:35 ` CK Hu
2019-11-25 7:41 ` Dennis-YC Hsieh
2019-11-21 9:12 ` [PATCH v1 07/12] soc: mediatek: cmdq: add write_s function Dennis YC Hsieh
2019-11-22 8:56 ` CK Hu
2019-11-22 10:11 ` Dennis-YC Hsieh
2019-11-25 2:08 ` CK Hu
2019-11-25 7:39 ` Dennis-YC Hsieh
2019-11-21 9:12 ` Dennis YC Hsieh [this message]
2019-11-21 9:12 ` [PATCH v1 09/12] soc: mediatek: cmdq: add mem move function Dennis YC Hsieh
2019-11-21 9:12 ` [PATCH v1 10/12] soc: mediatek: cmdq: add loop function Dennis YC Hsieh
2019-11-22 9:46 ` CK Hu
2019-11-22 10:29 ` Dennis-YC Hsieh
2019-11-25 1:35 ` CK Hu
2019-11-25 7:36 ` Dennis-YC Hsieh
2019-11-21 9:12 ` [PATCH v1 11/12] soc: mediatek: cmdq: add wait no clear event function Dennis YC Hsieh
2019-11-21 9:12 ` [PATCH v1 12/12] soc: mediatek: cmdq: add set " Dennis YC Hsieh
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1574327552-11806-9-git-send-email-dennis-yc.hsieh@mediatek.com \
--to=dennis-yc.hsieh@mediatek.com \
--cc=bibby.hsieh@mediatek.com \
--cc=ck.hu@mediatek.com \
--cc=devicetree@vger.kernel.org \
--cc=houlong.wei@mediatek.com \
--cc=jassisinghbrar@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=matthias.bgg@gmail.com \
--cc=robh+dt@kernel.org \
--cc=wsd_upstream@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).