From: Eddie James <eajames@linux.ibm.com>
To: linux-aspeed@lists.ozlabs.org
Cc: linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
mark.rutland@arm.com, jason@lakedaemon.net, maz@kernel.org,
robh+dt@kernel.org, tglx@linutronix.de, joel@jms.id.au,
andrew@aj.id.au, eajames@linux.ibm.com
Subject: [PATCH v3 05/12] dt-bindings: soc: Add Aspeed XDMA Engine
Date: Wed, 18 Dec 2019 09:09:31 -0600 [thread overview]
Message-ID: <1576681778-18737-6-git-send-email-eajames@linux.ibm.com> (raw)
In-Reply-To: <1576681778-18737-1-git-send-email-eajames@linux.ibm.com>
Document the bindings for the Aspeed AST25XX and AST26XX XDMA engine.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
Changes since v2:
- Remove 'sdmc', rename 'vga-mem' to 'memory'
.../devicetree/bindings/soc/aspeed/xdma.txt | 40 +++++++++++++++++++
MAINTAINERS | 6 +++
2 files changed, 46 insertions(+)
create mode 100644 Documentation/devicetree/bindings/soc/aspeed/xdma.txt
diff --git a/Documentation/devicetree/bindings/soc/aspeed/xdma.txt b/Documentation/devicetree/bindings/soc/aspeed/xdma.txt
new file mode 100644
index 000000000000..58253ea1587b
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/aspeed/xdma.txt
@@ -0,0 +1,40 @@
+Aspeed AST25XX and AST26XX XDMA Engine
+
+The XDMA Engine embedded in the AST2500 and AST2600 SOCs can perform automatic
+DMA operations over PCI between the SOC (acting as a BMC) and a host processor.
+
+Required properties:
+ - compatible : must be "aspeed,ast2500-xdma" or
+ "aspeed,ast2600-xdma"
+ - reg : contains the address and size of the memory region
+ associated with the XDMA engine registers
+ - clocks : clock specifier for the clock associated with the
+ XDMA engine
+ - resets : reset specifier for the syscon reset associated with
+ the XDMA engine
+ - interrupts-extended : two interrupt cells; the first specifies the global
+ interrupt for the XDMA engine and the second
+ specifies the PCI-E reset or PERST interrupt.
+ - scu : a phandle to the syscon node for the system control
+ unit of the SOC
+ - memory : contains the address and size of the memory area to
+ be used by the XDMA engine for DMA operations
+
+Optional properties:
+ - pcie-device : should be either "bmc" or "vga", corresponding to
+ which device should be used by the XDMA engine for
+ DMA operations. If this property is not set, the XDMA
+ engine will use the BMC PCI-E device.
+
+Example:
+
+ xdma@1e6e7000 {
+ compatible = "aspeed,ast2500-xdma";
+ reg = <0x1e6e7000 0x100>;
+ clocks = <&syscon ASPEED_CLK_GATE_BCLK>;
+ resets = <&syscon ASPEED_RESET_XDMA>;
+ interrupts-extended = <&vic 6>, <&scu_ic ASPEED_AST2500_SCU_IC_PCIE_RESET_LO_TO_HI>;
+ scu = <&syscon>;
+ pcie-device = "bmc";
+ memory = <0x9f000000 0x01000000>;
+ };
diff --git a/MAINTAINERS b/MAINTAINERS
index ac9c120d192b..8a14d4268bdc 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2708,6 +2708,12 @@ S: Maintained
F: drivers/media/platform/aspeed-video.c
F: Documentation/devicetree/bindings/media/aspeed-video.txt
+ASPEED XDMA ENGINE DRIVER
+M: Eddie James <eajames@linux.ibm.com>
+L: linux-aspeed@lists.ozlabs.org (moderated for non-subscribers)
+S: Maintained
+F: Documentation/devicetree/bindings/soc/aspeed/xdma.txt
+
ASUS NOTEBOOKS AND EEEPC ACPI/WMI EXTRAS DRIVERS
M: Corentin Chary <corentin.chary@gmail.com>
L: acpi4asus-user@lists.sourceforge.net
--
2.24.0
next prev parent reply other threads:[~2019-12-18 15:11 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-18 15:09 [PATCH v3 00/12] aspeed: Add SCU interrupt controller and XDMA engine drivers Eddie James
2019-12-18 15:09 ` [PATCH v3 01/12] dt-bindings: interrupt-controller: Add Aspeed SCU interrupt controller Eddie James
2019-12-18 15:09 ` [PATCH v3 02/12] irqchip: " Eddie James
2019-12-18 15:09 ` [PATCH v3 03/12] ARM: dts: aspeed: ast2500: Add " Eddie James
2019-12-18 22:34 ` Andrew Jeffery
2019-12-18 15:09 ` [PATCH v3 04/12] ARM: dts: aspeed: ast2600: Add SCU interrupt controllers Eddie James
2019-12-18 15:09 ` Eddie James [this message]
2019-12-18 23:12 ` [PATCH v3 05/12] dt-bindings: soc: Add Aspeed XDMA Engine Andrew Jeffery
2019-12-19 15:48 ` Eddie James
2019-12-19 21:14 ` Andrew Jeffery
2019-12-18 15:09 ` [PATCH v3 06/12] soc: aspeed: Add XDMA Engine Driver Eddie James
2019-12-18 23:12 ` Andrew Jeffery
2019-12-18 15:09 ` [PATCH v3 07/12] soc: aspeed: xdma: Add user interface Eddie James
2019-12-19 1:19 ` Andrew Jeffery
2019-12-19 16:00 ` Eddie James
2019-12-19 21:16 ` Andrew Jeffery
2019-12-18 15:09 ` [PATCH v3 08/12] soc: aspeed: xdma: Add reset ioctl Eddie James
2019-12-18 15:09 ` [PATCH v3 09/12] ARM: dts: aspeed: ast2500: Add XDMA Engine Eddie James
2019-12-18 15:09 ` [PATCH v3 10/12] ARM: dts: aspeed: ast2600: " Eddie James
2019-12-18 15:09 ` [PATCH v3 11/12] ARM: dts: aspeed: witherspoon: Enable " Eddie James
2019-12-18 15:09 ` [PATCH v3 12/12] ARM: dts: aspeed: tacoma: Enable XDMA engine Eddie James
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1576681778-18737-6-git-send-email-eajames@linux.ibm.com \
--to=eajames@linux.ibm.com \
--cc=andrew@aj.id.au \
--cc=devicetree@vger.kernel.org \
--cc=jason@lakedaemon.net \
--cc=joel@jms.id.au \
--cc=linux-aspeed@lists.ozlabs.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=maz@kernel.org \
--cc=robh+dt@kernel.org \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).