Re: [PATCH v3 1/2] doc: Add bindings document for Xilinx LogiCore PR Decoupler

[Moritz Fischer <moritz.fischer.private@gmail.com>]

[-- Attachment #1.1: Type: text/plain, Size: 3577 bytes --]

On Fri, Mar 24, 2017 at 12:25:25PM -0500, Alan Tull wrote:
> On Fri, Mar 24, 2017 at 10:23 AM, Moritz Fischer
> <moritz.fischer.private@gmail.com> wrote:
> > On Fri, Mar 24, 2017 at 09:59:08AM -0500, Rob Herring wrote:
> >> On Fri, Mar 17, 2017 at 01:11:12PM -0700, Moritz Fischer wrote:
> >> > This adds the binding documentation for the Xilinx LogiCORE PR
> >> > Decoupler soft core.
> >> >
> >> > Signed-off-by: Moritz Fischer <mdf@kernel.org>
> >> > Cc: Michal Simek <michal.simek@xilinx.com>
> >> > Cc: Sören Brinkmann <soren.brinkmann@xilinx.com>
> >> > Cc: linux-kernel@vger.kernel.org
> >> > Cc: devicetree@vger.kernel.org
> >> > ---
> >> >
> >> > Changes from v2:
> >> > - Added refence to generic fpga-region bindings
> >> > - Fixed up reg property in example
> >> > - Added fallback to "xlnx,pr-decoupler" without version
> >> >
> >> > Changes from v1:
> >> > - Added clock names & clock to example
> >> > - Merged some of the description from Michal's version
> >> >
> >> > ---
> >> >  .../bindings/fpga/xilinx-pr-decoupler.txt          | 35 ++++++++++++++++++++++
> >> >  1 file changed, 35 insertions(+)
> >> >  create mode 100644 Documentation/devicetree/bindings/fpga/xilinx-pr-decoupler.txt
> >> >
> >> > diff --git a/Documentation/devicetree/bindings/fpga/xilinx-pr-decoupler.txt b/Documentation/devicetree/bindings/fpga/xilinx-pr-decoupler.txt
> >> > new file mode 100644
> >> > index 0000000..16141bd
> >> > --- /dev/null
> >> > +++ b/Documentation/devicetree/bindings/fpga/xilinx-pr-decoupler.txt
> >> > @@ -0,0 +1,35 @@
> >> > +Xilinx LogiCORE Partial Reconfig Decoupler Softcore
> >> > +
> >> > +The Xilinx LogiCORE Partial Reconfig Decoupler manages one or more
> >> > +decouplers / fpga bridges.
> >> > +The controller can decouple/disable the bridges which prevents signal
> >> > +changes from passing through the bridge.  The controller can also
> >> > +couple / enable the bridges which allows traffic to pass through the
> >> > +bridge normally.
> >> > +
> >> > +The Driver supports only MMIO handling. A PR region can have multiple
> >> > +PR Decouples which can bhe handled independently or chaines via decouple/
> >>
> >> s/chaines/chains/
> >
> > Fixed in v4.
> >
> >> > +decouple_status signals.
> >> > +
> >> > +Required properties:
> >> > +- compatible               : Should contain "xlnx,pr-decoupler-1.00"
> >> > +- regs                     : base address and size for decoupler module
> >> > +- clocks           : input clock to IP
> >> > +- clock-names              : should contain "aclk"
> >> > +
> >> > +Optional properties:
> >> > +- bridge-enable            : 0 if driver should disable bridge at startup
> >> > +                     1 if driver should enable bridge at startup
> >> > +                     Default is to leave bridge in current state.
> >>
> >> This is common and should move into a common doc. Maybe fpga-region.txt
> >> works?
> >
> > Ok will add patch for that to v5 series.
> 
> Arg, our emails criss-crossed.  I've already sent v4 to Greg.  I hope
> we don't need v5 for this one thing.  bridge-enable is common for the
> fpga bridges (altera-fpga2sdram-bridge.txt, altera-freeze-bridge.txt,
> altera-hps2fpga-bridge.txt, xilinx-pr-decoupler.txt).  Probably we
> need a new patch to move this common bridges binding from all the
> above to fpga-region.txt or create a new fpga-bridges.txt.  At first
> blush, I prefer the later.

Yeah, I'll just send a follow-up patch, it's not that it breaks anything
the way it is.

- Moritz

[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 455 bytes --]

[-- Attachment #2: Type: text/plain, Size: 176 bytes --]

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel