Hi Philipp,

On Mon, Jan 29, 2018 at 12:29:07AM +0100, Philipp Rossak wrote:
> For adding newer sensor some basic rework of the code is necessary.
> 
> This commit reworks the code and allows the sampling start/end code and
> the position of value readout register to be altered. Later the start/end
> functions will be used to configure the ths and start/stop the
> sampling.
> 
> Signed-off-by: Icenowy Zheng <icenowy-h8G6r0blFSE@public.gmane.org>
> Signed-off-by: Philipp Rossak <embed3d-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> ---
>  drivers/iio/adc/sun4i-gpadc-iio.c | 44 ++++++++++++++++++++++++++++++++++-----
>  1 file changed, 39 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/iio/adc/sun4i-gpadc-iio.c b/drivers/iio/adc/sun4i-gpadc-iio.c
> index 03804ff9c006..db57d9fffe48 100644
> --- a/drivers/iio/adc/sun4i-gpadc-iio.c
> +++ b/drivers/iio/adc/sun4i-gpadc-iio.c
> @@ -49,6 +49,15 @@ static unsigned int sun6i_gpadc_chan_select(unsigned int chan)
>  	return SUN6I_GPADC_CTRL1_ADC_CHAN_SELECT(chan);
>  }
>  
> +struct sun4i_gpadc_iio;
> +
> +/*
> + * Prototypes for these functions, which enable these functions to be
> + * referenced in gpadc_data structures.
> + */

Comment not needed.

> +static int sun4i_gpadc_sample_start(struct sun4i_gpadc_iio *info);
> +static int sun4i_gpadc_sample_end(struct sun4i_gpadc_iio *info);
> +
>  struct gpadc_data {
>  	int		temp_offset;
>  	int		temp_scale;
> @@ -56,6 +65,9 @@ struct gpadc_data {
>  	unsigned int	tp_adc_select;
>  	unsigned int	(*adc_chan_select)(unsigned int chan);
>  	unsigned int	adc_chan_mask;
> +	unsigned int	temp_data;

Does not really have anything to do with sample_start/end. I would have
made a different commit for it.

Otherwise,
Reviewed-by: Quentin Schulz <quentin.schulz-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>

Quentin