From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-7.1 required=3.0 tests=DKIMWL_WL_HIGH,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,INCLUDES_PATCH,MAILING_LIST_MULTI,PDS_BTC_ID, PDS_BTC_MSGID,SIGNED_OFF_BY,SPF_HELO_NONE,SPF_PASS,USER_AGENT_SANE_1 autolearn=ham autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 79F4AC43603 for ; Thu, 5 Dec 2019 22:24:25 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id 32F8720707 for ; Thu, 5 Dec 2019 22:24:25 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=kernel.org; s=default; t=1575584665; bh=yoOXzr+BmG4ch4AnxW3RjKkOM7fzJsI9RxKXV57oCwg=; h=Date:From:To:Cc:Subject:References:In-Reply-To:List-ID:From; b=t0Iz+SVHzttFZfQuuMX2NeWP79ZcpkiZpWt6q+2uaCfj7kjnj2uSj0mBo7u2RKwWu e04l0HLTkasZSk1UVwm2+0otGRTAgoIiZCI/fKddDl2eqWwPPW/nqfZsVoMsur//g9 nwcNk4rnNu1qdWKYqZwwXVxU43ifsDgrs5zWj8i4= Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1729552AbfLEWYY (ORCPT ); Thu, 5 Dec 2019 17:24:24 -0500 Received: from mail-ot1-f66.google.com ([209.85.210.66]:38994 "EHLO mail-ot1-f66.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1729489AbfLEWYY (ORCPT ); Thu, 5 Dec 2019 17:24:24 -0500 Received: by mail-ot1-f66.google.com with SMTP id 77so4088156oty.6; Thu, 05 Dec 2019 14:24:23 -0800 (PST) X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:date:from:to:cc:subject:message-id:references :mime-version:content-disposition:in-reply-to:user-agent; bh=V+ntObkjRpAa/oOIcrXOi6B2bOSJNJ8qawZSdjlonVM=; b=QEBnD4IsmHX6hafNovR1VZeKthExfQQ3yBxiLYuuxqzg18RT+yPcn6Qcp8Njta8Buc CMKGl6WoOS5GaDpXcQU5+RDTSw0CT/EITtUqCs8Jaw+PrY9Hn4vrG9lHO61EvkbJE8NH Ptl6SjAQU+OOJu9C8omexuVzeENh5Vwz9hc1EzOoKt0vkXuIO+ve7X4oWjAP01ej3NlM qDH5k8PNtJqAMda7xAXglk1oXk7Qcp6r4KZoj+7FcekcQdzKf5yILqPB9Fc2NqHEvQKJ /HkTc2cgdW5L0niwtkLk5WT0zgRZArxprnBwyZHGD79xDXO2wCKEqCP2CZAcicW0d/yt epaQ== X-Gm-Message-State: APjAAAUWiPXefMtTPFpuyW/nj0lng49OQ3M+M7A5iqIHaFMGR9QsNMTw 1rSvpWBMywU+yPVJxFpPVg== X-Google-Smtp-Source: APXvYqzwgOnIep4g2tpFIV3s/3gibmbz5buTcOGPMtyrZVZBEnUJrTuNJw11+0nE6brk2O2rA2p/LQ== X-Received: by 2002:a9d:7305:: with SMTP id e5mr8346342otk.64.1575584662374; Thu, 05 Dec 2019 14:24:22 -0800 (PST) Received: from localhost (24-155-109-49.dyn.grandenetworks.net. [24.155.109.49]) by smtp.gmail.com with ESMTPSA id r24sm3868153ota.61.2019.12.05.14.24.21 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Thu, 05 Dec 2019 14:24:21 -0800 (PST) Date: Thu, 5 Dec 2019 16:24:21 -0600 From: Rob Herring To: Fabrice Gasnier Cc: jic23@kernel.org, alexandre.torgue@st.com, mark.rutland@arm.com, mcoquelin.stm32@gmail.com, lars@metafoo.de, knaack.h@gmx.de, pmeerw@pmeerw.net, linux-iio@vger.kernel.org, devicetree@vger.kernel.org, linux-stm32@st-md-mailman.stormreply.com, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org Subject: Re: [PATCH] dt-bindings: iio: adc: stm32-adc: convert bindings to json-schema Message-ID: <20191205222421.GA312@bogus> References: <1574873325-9916-1-git-send-email-fabrice.gasnier@st.com> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <1574873325-9916-1-git-send-email-fabrice.gasnier@st.com> User-Agent: Mutt/1.10.1 (2018-07-13) Sender: devicetree-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org On Wed, Nov 27, 2019 at 05:48:45PM +0100, Fabrice Gasnier wrote: > Convert the STM32 ADC binding to DT schema format using json-schema > > Signed-off-by: Fabrice Gasnier > --- > Note: this applies on top of IIO tree currently (iio-for-5.5c). > --- > .../devicetree/bindings/iio/adc/st,stm32-adc.txt | 149 ------- > .../devicetree/bindings/iio/adc/st,stm32-adc.yaml | 448 +++++++++++++++++++++ > 2 files changed, 448 insertions(+), 149 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt > create mode 100644 Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml > diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml > new file mode 100644 > index 00000000..2ebc2e6 > --- /dev/null > +++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml > @@ -0,0 +1,448 @@ > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: "http://devicetree.org/schemas/bindings/iio/adc/st,stm32-adc.yaml#" > +$schema: "http://devicetree.org/meta-schemas/core.yaml#" > + > +title: STMicroelectronics STM32 ADC bindings > + > +description: | > + STM32 ADC is a successive approximation analog-to-digital converter. > + It has several multiplexed input channels. Conversions can be performed > + in single, continuous, scan or discontinuous mode. Result of the ADC is > + stored in a left-aligned or right-aligned 32-bit data register. > + Conversions can be launched in software or using hardware triggers. > + > + The analog watchdog feature allows the application to detect if the input > + voltage goes beyond the user-defined, higher or lower thresholds. > + > + Each STM32 ADC block can have up to 3 ADC instances. > + > +maintainers: > + - Fabrice Gasnier > + > +properties: > + compatible: > + enum: > + - st,stm32f4-adc-core > + - st,stm32h7-adc-core > + - st,stm32mp1-adc-core > + > + reg: > + description: Offset and length of the ADC block register set Don't need generic description of a standard property. > + maxItems: 1 > + > + interrupts: > + description: | > + One or more interrupts for ADC block, depending on part used: > + - stm32f4 and stm32h7 share a common ADC interrupt line. > + - stm32mp1 has two separate interrupt lines, one for each ADC within > + ADC block. You can put minItems: 1, maxItems: 2 here. > + > + clocks: > + description: | > + Core can use up to two clocks, depending on part used: > + - "adc" clock: for the analog circuitry, common to all ADCs. > + It's required on stm32f4. > + It's optional on stm32h7 and stm32mp1. > + - "bus" clock: for registers access, common to all ADCs. > + It's not present on stm32f4. > + It's required on stm32h7 and stm32mp1. > + > + clock-names: true > + > + st,max-clk-rate-hz: > + description: | > + Allow to specify desired max clock rate used by analog circuitry. > + allOf: > + - $ref: /schemas/types.yaml#/definitions/uint32 *-hz already has a type, so you can drop this. No range you can specify? > + > + vdda-supply: > + description: Phandle to the vdda input analog voltage. > + > + vref-supply: > + description: Phandle to the vref input analog reference voltage. > + > + booster-supply: > + description: | There's not any formatting here, so '|' can be dropped. > + Phandle to the embedded booster regulator that can be used to supply ADC > + analog input switches on stm32h7 and stm32mp1. > + > + vdd-supply: > + description: | > + Phandle to the vdd input voltage. It can be used to supply ADC analog > + input switches on stm32mp1. > + > + st,syscfg: > + description: | > + Phandle to system configuration controller. It can be used to control the > + analog circuitry on stm32mp1. > + allOf: > + - $ref: "/schemas/types.yaml#/definitions/phandle-array" > + > + interrupt-controller: true > + > + '#interrupt-cells': > + const: 1 > + > + '#address-cells': > + const: 1 > + > + '#size-cells': > + const: 0 > + > +allOf: > + - if: > + properties: > + compatible: > + contains: > + const: st,stm32f4-adc-core > + > + then: > + properties: > + clocks: > + maxItems: 1 > + > + clock-names: > + items: > + const: adc > + maxItems: 1 You can simplify to: clock-names: const: adc Note that if you did have 'items' it should be a list (i.e. have '-'). > + > + interrupts: > + items: > + - description: interrupt line common for all ADCs > + > + booster-supply: false > + > + vdd-supply: false > + > + st,syscfg: false > + > + - if: > + properties: > + compatible: > + contains: > + const: st,stm32h7-adc-core > + > + then: > + properties: > + clocks: > + minItems: 1 > + maxItems: 2 > + > + clock-names: > + items: > + - const: bus > + - const: adc > + minItems: 1 > + maxItems: 2 > + > + interrupts: > + items: > + - description: interrupt line common for all ADCs > + > + vdd-supply: false > + > + st,syscfg: false > + > + - if: > + properties: > + compatible: > + contains: > + const: st,stm32mp1-adc-core > + > + then: > + properties: > + clocks: > + minItems: 1 > + maxItems: 2 > + > + clock-names: > + items: > + - const: bus > + - const: adc > + minItems: 1 > + maxItems: 2 > + > + interrupts: > + items: > + - description: interrupt line for ADC1 > + - description: interrupt line for ADC2 > + > +additionalProperties: false > + > +required: > + - compatible > + - reg > + - interrupts > + - clocks > + - clock-names > + - vdda-supply > + - vref-supply > + - interrupt-controller > + - '#interrupt-cells' > + - '#address-cells' > + - '#size-cells' > + > +patternProperties: > + "^adc@[0-9]+$": > + type: object > + description: | > + An ADC block node should contain at least one subnode, representing an > + ADC instance available on the machine. > + > + properties: > + compatible: > + enum: > + - st,stm32f4-adc > + - st,stm32h7-adc > + - st,stm32mp1-adc > + > + reg: > + description: | > + Offset of ADC instance in ADC block. Valid values are: > + - 0x0: ADC1 > + - 0x100: ADC2 > + - 0x200: ADC3 (stm32f4 only) > + maxItems: 1 > + > + '#io-channel-cells': > + const: 1 > + > + interrupts: > + description: | > + IRQ Line for the ADC instance. Valid values are: > + - 0 for adc@0 > + - 1 for adc@100 > + - 2 for adc@200 (stm32f4 only) > + maxItems: 1 > + > + clocks: > + description: | > + Input clock private to this ADC instance. It's required only on > + stm32f4, that has per instance clock input for registers access. > + maxItems: 1 > + > + dmas: > + description: RX DMA Channel > + maxItems: 1 > + > + dma-names: > + const: rx > + > + assigned-resolution-bits: > + description: | > + Resolution (bits) to use for conversions: > + - can be 6, 8, 10 or 12 on stm32f4 > + - can be 8, 10, 12, 14 or 16 on stm32h7 and stm32mp1 > + allOf: > + - $ref: /schemas/types.yaml#/definitions/uint32 > + > + st,adc-channels: > + description: | > + List of single-ended channels muxed for this ADC. It can have up to: > + - 16 channels, numbered from 0 to 15 (for in0..in15) on stm32f4 > + - 20 channels, numbered from 0 to 19 (for in0..in19) on stm32h7 and > + stm32mp1. > + allOf: > + - $ref: /schemas/types.yaml#/definitions/uint32-array > + > + st,adc-diff-channels: > + description: | > + List of differential channels muxed for this ADC. Some channels can > + be configured as differential instead of single-ended on stm32h7 and > + on stm32mp1. Positive and negative inputs pairs are listed: > + , ,... vinp and vinn are numbered from 0 to 19. > + > + Note: At least one of "st,adc-channels" or "st,adc-diff-channels" is > + required. Both properties can be used together. Some channels can be > + used as single-ended and some other ones as differential (mixed). But > + channels can't be configured both as single-ended and differential. > + allOf: > + - $ref: /schemas/types.yaml#/definitions/uint32-matrix > + - items: > + items: > + - description: | > + "vinp" indicates positive input number > + minimum: 0 > + maximum: 19 > + - description: | > + "vinn" indicates negative input number > + minimum: 0 > + maximum: 19 > + > + st,min-sample-time-nsecs: > + description: | > + Minimum sampling time in nanoseconds. Depending on hardware (board) > + e.g. high/low analog input source impedance, fine tune of ADC > + sampling time may be recommended. This can be either one value or an > + array that matches "st,adc-channels" and/or "st,adc-diff-channels" > + list, to set sample time resp. for all channels, or independently for > + each channel. > + allOf: > + - $ref: /schemas/types.yaml#/definitions/uint32-array > + > + allOf: > + - if: > + properties: > + compatible: > + contains: > + const: st,stm32f4-adc There's a lot of if/thens in this binding. I wonder if splitting this into 2 files might be cleaner. > + > + then: > + properties: > + reg: > + enum: > + - 0x0 > + - 0x100 > + - 0x200 > + > + interrupts: > + minimum: 0 > + maximum: 2 > + > + assigned-resolution-bits: > + allOf: > + - enum: [6, 8, 10, 12] > + - default: 12 > + > + st,adc-channels: > + allOf: > + - maxItems: 16 > + items: > + minimum: 0 > + maximum: 15 > + > + st,adc-diff-channels: false > + > + st,min-sample-time-nsecs: > + allOf: > + - maxItems: 16 > + items: > + minimum: 80 > + > + required: > + - clocks > + > + - if: > + properties: > + compatible: > + contains: > + enum: > + - st,stm32h7-adc > + - st,stm32mp1-adc > + > + then: > + properties: > + reg: > + enum: > + - 0x0 > + - 0x100 > + > + interrupts: > + minimum: 0 > + maximum: 1 > + > + assigned-resolution-bits: > + allOf: Shouldn't need the allOf here. > + - enum: [8, 10, 12, 14, 16] > + - default: 16 > + > + st,adc-channels: > + allOf: Shouldn't need the allOf here. > + - maxItems: 20 > + items: > + minimum: 0 > + maximum: 19 > + > + st,min-sample-time-nsecs: > + allOf: Shouldn't need the allOf here. > + - maxItems: 20 > + items: > + minimum: 40 > + > + additionalProperties: false > + > + anyOf: > + - required: > + - st,adc-channels > + - required: > + - st,adc-diff-channels > + > + required: > + - compatible > + - reg > + - interrupts > + - '#io-channel-cells' > + > +examples: > + - | > + // Example 1: with stm32f429 > + adc123: adc@40012000 { > + compatible = "st,stm32f4-adc-core"; > + reg = <0x40012000 0x400>; > + interrupts = <18>; > + clocks = <&rcc 0 168>; > + clock-names = "adc"; > + st,max-clk-rate-hz = <36000000>; > + vdda-supply = <&vdda>; > + vref-supply = <&vref>; > + interrupt-controller; > + #interrupt-cells = <1>; > + #address-cells = <1>; > + #size-cells = <0>; > + adc@0 { > + compatible = "st,stm32f4-adc"; > + #io-channel-cells = <1>; > + reg = <0x0>; > + clocks = <&rcc 0 168>; > + interrupt-parent = <&adc123>; > + interrupts = <0>; > + st,adc-channels = <8>; > + dmas = <&dma2 0 0 0x400 0x0>; > + dma-names = "rx"; > + assigned-resolution-bits = <8>; > + }; > + // ... > + // other adc child nodes follow... > + }; > + > + - | > + // Example 2: with stm32mp157c to setup ADC1 with: > + // - channel 1 as single-ended > + // - channels 2 & 3 as differential (with resp. 6 & 7 negative inputs) > + #include > + #include > + adc12: adc@48003000 { > + compatible = "st,stm32mp1-adc-core"; > + reg = <0x48003000 0x400>; > + interrupts = , > + ; > + clocks = <&rcc ADC12>, <&rcc ADC12_K>; > + clock-names = "bus", "adc"; > + booster-supply = <&booster>; > + vdd-supply = <&vdd>; > + vdda-supply = <&vdda>; > + vref-supply = <&vref>; > + st,syscfg = <&syscfg>; > + interrupt-controller; > + #interrupt-cells = <1>; > + #address-cells = <1>; > + #size-cells = <0>; > + adc@0 { > + compatible = "st,stm32mp1-adc"; > + #io-channel-cells = <1>; > + reg = <0x0>; > + interrupt-parent = <&adc12>; > + interrupts = <0>; > + st,adc-channels = <1>; > + st,adc-diff-channels = <2 6>, <3 7>; > + st,min-sample-time-nsecs = <5000>; > + dmas = <&dmamux1 9 0x400 0x05>; > + dma-names = "rx"; > + }; > + // ... > + // other adc child node follow... > + }; > + > +... > -- > 2.7.4 >