From: Anand Moon <linux.amoon@gmail.com>
To: Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Heiko Stuebner <heiko@sntech.de>,
Jagan Teki <jagan@amarulasolutions.com>,
Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>,
Robin Murphy <robin.murphy@arm.com>,
Daniel Schultz <d.schultz@phytec.de>
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: [RFCv1 8/8] arm: rockchip: drop unused field from rk8xx i2c node
Date: Fri, 6 Dec 2019 18:45:36 +0000 [thread overview]
Message-ID: <20191206184536.2507-9-linux.amoon@gmail.com> (raw)
In-Reply-To: <20191206184536.2507-1-linux.amoon@gmail.com>
Drop unused rockchip,system-power-controller from rk8xx
i2c node.
Cc: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
---
arch/arm/boot/dts/rk3036-kylin.dts | 1 -
arch/arm/boot/dts/rk3188-px3-evb.dts | 1 -
arch/arm/boot/dts/rk3288-evb-rk808.dts | 1 -
arch/arm/boot/dts/rk3288-phycore-som.dtsi | 1 -
arch/arm/boot/dts/rk3288-popmetal.dts | 1 -
arch/arm/boot/dts/rk3288-tinker.dtsi | 1 -
arch/arm/boot/dts/rk3288-veyron.dtsi | 1 -
arch/arm/boot/dts/rk3288-vyasa.dts | 1 -
arch/arm/boot/dts/rv1108-elgin-r1.dts | 1 -
arch/arm/boot/dts/rv1108-evb.dts | 1 -
10 files changed, 10 deletions(-)
diff --git a/arch/arm/boot/dts/rk3036-kylin.dts b/arch/arm/boot/dts/rk3036-kylin.dts
index fb3cf005cc90..0a7290ab718d 100644
--- a/arch/arm/boot/dts/rk3036-kylin.dts
+++ b/arch/arm/boot/dts/rk3036-kylin.dts
@@ -118,7 +118,6 @@ rk808: pmic@1b {
interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pmic_int &global_pwroff>;
- rockchip,system-power-controller;
wakeup-source;
#clock-cells = <1>;
clock-output-names = "xin32k", "rk808-clkout2";
diff --git a/arch/arm/boot/dts/rk3188-px3-evb.dts b/arch/arm/boot/dts/rk3188-px3-evb.dts
index c32e1d441cf7..334fa510995c 100644
--- a/arch/arm/boot/dts/rk3188-px3-evb.dts
+++ b/arch/arm/boot/dts/rk3188-px3-evb.dts
@@ -88,7 +88,6 @@ rk808: pmic@1c {
reg = <0x1c>;
interrupt-parent = <&gpio0>;
interrupts = <RK_PB3 IRQ_TYPE_LEVEL_LOW>;
- rockchip,system-power-controller;
wakeup-source;
#clock-cells = <1>;
clock-output-names = "xin32k", "rk808-clkout2";
diff --git a/arch/arm/boot/dts/rk3288-evb-rk808.dts b/arch/arm/boot/dts/rk3288-evb-rk808.dts
index 16788209625b..4b280c4b4850 100644
--- a/arch/arm/boot/dts/rk3288-evb-rk808.dts
+++ b/arch/arm/boot/dts/rk3288-evb-rk808.dts
@@ -17,7 +17,6 @@ rk808: pmic@1b {
interrupts = <RK_PA4 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pmic_int &global_pwroff>;
- rockchip,system-power-controller;
wakeup-source;
#clock-cells = <1>;
clock-output-names = "xin32k", "rk808-clkout2";
diff --git a/arch/arm/boot/dts/rk3288-phycore-som.dtsi b/arch/arm/boot/dts/rk3288-phycore-som.dtsi
index 77a47b9b756d..2076566a2c97 100644
--- a/arch/arm/boot/dts/rk3288-phycore-som.dtsi
+++ b/arch/arm/boot/dts/rk3288-phycore-som.dtsi
@@ -148,7 +148,6 @@ rk818: pmic@1c {
interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pmic_int>;
- rockchip,system-power-controller;
wakeup-source;
#clock-cells = <1>;
diff --git a/arch/arm/boot/dts/rk3288-popmetal.dts b/arch/arm/boot/dts/rk3288-popmetal.dts
index 6a51940398b5..251668fee14d 100644
--- a/arch/arm/boot/dts/rk3288-popmetal.dts
+++ b/arch/arm/boot/dts/rk3288-popmetal.dts
@@ -168,7 +168,6 @@ rk808: pmic@1b {
interrupts = <RK_PA4 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pmic_int &global_pwroff>;
- rockchip,system-power-controller;
wakeup-source;
#clock-cells = <1>;
clock-output-names = "xin32k", "rk808-clkout2";
diff --git a/arch/arm/boot/dts/rk3288-tinker.dtsi b/arch/arm/boot/dts/rk3288-tinker.dtsi
index 0aeef23ca3db..15fc1caca852 100644
--- a/arch/arm/boot/dts/rk3288-tinker.dtsi
+++ b/arch/arm/boot/dts/rk3288-tinker.dtsi
@@ -154,7 +154,6 @@ rk808: pmic@1b {
<&gpio0 12 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pmic_int &global_pwroff &dvs_1 &dvs_2>;
- rockchip,system-power-controller;
wakeup-source;
vcc1-supply = <&vcc_sys>;
diff --git a/arch/arm/boot/dts/rk3288-veyron.dtsi b/arch/arm/boot/dts/rk3288-veyron.dtsi
index 7525e3dd1fc1..d7663ebc798f 100644
--- a/arch/arm/boot/dts/rk3288-veyron.dtsi
+++ b/arch/arm/boot/dts/rk3288-veyron.dtsi
@@ -221,7 +221,6 @@ rk808: pmic@1b {
interrupts = <RK_PA4 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pmic_int_l>;
- rockchip,system-power-controller;
wakeup-source;
#clock-cells = <1>;
diff --git a/arch/arm/boot/dts/rk3288-vyasa.dts b/arch/arm/boot/dts/rk3288-vyasa.dts
index ba06e9f97ddc..98e48ecb473e 100644
--- a/arch/arm/boot/dts/rk3288-vyasa.dts
+++ b/arch/arm/boot/dts/rk3288-vyasa.dts
@@ -167,7 +167,6 @@ rk808: pmic@1b {
clock-output-names = "xin32k", "rk808-clkout2";
pinctrl-names = "default";
pinctrl-0 = <&pmic_int &global_pwroff>;
- rockchip,system-power-controller;
wakeup-source;
vcc1-supply = <&vcc_sys>;
diff --git a/arch/arm/boot/dts/rv1108-elgin-r1.dts b/arch/arm/boot/dts/rv1108-elgin-r1.dts
index b1db924710c8..39acc472774d 100644
--- a/arch/arm/boot/dts/rv1108-elgin-r1.dts
+++ b/arch/arm/boot/dts/rv1108-elgin-r1.dts
@@ -67,7 +67,6 @@ rk805: pmic@18 {
reg = <0x18>;
interrupt-parent = <&gpio0>;
interrupts = <RK_PB4 IRQ_TYPE_LEVEL_LOW>;
- rockchip,system-power-controller;
vcc1-supply = <&vcc_sys>;
vcc2-supply = <&vcc_sys>;
diff --git a/arch/arm/boot/dts/rv1108-evb.dts b/arch/arm/boot/dts/rv1108-evb.dts
index 30f3d0470ad9..e21817237792 100644
--- a/arch/arm/boot/dts/rv1108-evb.dts
+++ b/arch/arm/boot/dts/rv1108-evb.dts
@@ -80,7 +80,6 @@ rk805: pmic@18 {
reg = <0x18>;
interrupt-parent = <&gpio0>;
interrupts = <RK_PB4 IRQ_TYPE_LEVEL_LOW>;
- rockchip,system-power-controller;
vcc1-supply = <&vcc_sys>;
vcc2-supply = <&vcc_sys>;
--
2.24.0
next prev parent reply other threads:[~2019-12-06 18:46 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-06 18:45 [RFCv1 0/8] RK3399 clean shutdown issue Anand Moon
2019-12-06 18:45 ` [RFCv1 1/8] mfd: rk808: Refactor shutdown functions Anand Moon
2019-12-16 11:11 ` Lee Jones
2019-12-06 18:45 ` [RFCv1 2/8] mfd: rk808: use syscore for RK805 PMIC shutdown Anand Moon
2019-12-09 13:34 ` Robin Murphy
2019-12-09 15:38 ` Anand Moon
2019-12-06 18:45 ` [RFCv1 3/8] mfd: rk808: use syscore for RK808 " Anand Moon
2019-12-06 18:45 ` [RFCv1 4/8] mfd: rk808: use syscore for RK818 " Anand Moon
2019-12-06 18:45 ` [RFCv1 5/8] mfd: rk808: cleanup unused function pointer Anand Moon
2019-12-06 18:45 ` [RFCv1 6/8] mfd: rk808: use common syscore for all PMCI for clean shutdown Anand Moon
2019-12-06 18:45 ` [RFCv1 7/8] arm64: rockchip: drop unused field from rk8xx i2c node Anand Moon
2019-12-06 18:45 ` Anand Moon [this message]
2019-12-06 22:32 ` [RFCv1 0/8] RK3399 clean shutdown issue Heiko Stuebner
2019-12-07 5:07 ` Anand Moon
2019-12-07 11:45 ` Heiko Stuebner
2019-12-09 13:29 ` Robin Murphy
2019-12-09 13:37 ` Peter Geis
2019-12-09 13:53 ` Heiko Stübner
2019-12-09 13:58 ` Robin Murphy
2019-12-09 14:51 ` Tobias Schramm
2019-12-09 14:56 ` Anand Moon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191206184536.2507-9-linux.amoon@gmail.com \
--to=linux.amoon@gmail.com \
--cc=d.schultz@phytec.de \
--cc=devicetree@vger.kernel.org \
--cc=heiko@sntech.de \
--cc=jagan@amarulasolutions.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=manivannan.sadhasivam@linaro.org \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
--cc=robin.murphy@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).