On Mon, Dec 23, 2019 at 04:16:40PM +0100, Yuti Amonkar wrote:
> Document the bindings used for the Cadence MHDP DPI/DP bridge in
> yaml format.
>
> Signed-off-by: Yuti Amonkar <yamonkar@cadence.com>
> ---
>  .../bindings/display/bridge/cdns,mhdp.yaml         | 109 +++++++++++++++++++++
>  1 file changed, 109 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/bridge/cdns,mhdp.yaml
>
> diff --git a/Documentation/devicetree/bindings/display/bridge/cdns,mhdp.yaml b/Documentation/devicetree/bindings/display/bridge/cdns,mhdp.yaml
> new file mode 100644
> index 0000000..aed6224
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/bridge/cdns,mhdp.yaml
> @@ -0,0 +1,109 @@
> +%YAML 1.2
> +---
> +$id: "http://devicetree.org/schemas/display/bridge/cdns,mhdp.yaml#"
> +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> +
> +title: Cadence MHDP bridge
> +
> +maintainers:
> +  - Swapnil Jakhade <sjakhade@cadence.com>
> +  - Yuti Amonkar <yamonkar@cadence.com>
> +
> +properties:
> +  compatible:
> +    enum:
> +      - cdns,mhdp8546
> +      - ti,j721e-mhdp8546
> +
> +  clocks:
> +    maxItems: 1
> +    description:
> +      DP bridge clock, it's used by the IP to know how to translate a number of
> +      clock cycles into a time (which is used to comply with DP standard timings
> +      and delays).
> +
> +  reg:
> +    minItems: 1
> +    maxItems: 2
> +    items:
> +      - description:
> +          Register block of mhdptx apb registers upto PHY mapped area(AUX_CONFIG_P).
> +          The AUX and PMA registers are mapped to associated phy driver.
> +      - description:
> +          Register block for DSS_EDP0_INTG_CFG_VP registers in case of TI J7 SoCs.
> +
> +  reg-names:
> +    minItems: 1
> +    maxItems: 2
> +    items:
> +      - const: mhdptx
> +      - const: j721e-intg

You should have an if / then clause to validate that the length is the
proper one based on the value of the compatible.

> +  phys:
> +    description: see the Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml

phys is a generic property, so we shouldn't tie it to one particular
phy. Especially since there's nothing in it that really explain what
this property is supposed to be.

> +  phy-names:
> +    const: dpphy
> +
> +  ports:
> +    type: object
> +    description:
> +      Ports as described in Documentation/devicetree/bindings/graph.txt
> +    properties:
> +       '#address-cells':
> +         const: 1
> +       '#size-cells':
> +         const: 0
> +       port@0:
> +         description:
> +           input port representing the DP bridge input
> +
> +       port@1:
> +         description:
> +           output port representing the DP bridge output
> +    required:
> +      - port@0
> +      - port@1
> +      - '#address-cells'
> +      - '#size-cells'
> +
> +required:
> +  - compatible
> +  - clocks
> +  - reg
> +  - phys
> +  - phy-names
> +  - ports
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    mhdp: dp-bridge@f0fb000000 {
> +        compatible = "cdns,mhdp8546";
> +        reg = <0xf0 0xfb000000 0x0 0x1000000>,
> +              <0xf0 0xfc000000 0x0 0x2000000>;

There's two items here, yet you're not using the TI compatible?

Maxime