From: Jacopo Mondi <jacopo+renesas@jmondi.org>
To: robh+dt@kernel.org, devicetree@vger.kernel.org,
linux-media@vger.kernel.org
Cc: Jacopo Mondi <jacopo+renesas@jmondi.org>,
mchehab@kernel.org, sakari.ailus@linux.intel.com,
hverkuil-cisco@xs4all.nl, laurent.pinchart@ideasonboard.com,
linux-renesas-soc@vger.kernel.org
Subject: [PATCH 7/8] dt-bindings: media: ov772x: Convert to json-schema
Date: Wed, 15 Jul 2020 16:09:50 +0200 [thread overview]
Message-ID: <20200715140951.90753-8-jacopo+renesas@jmondi.org> (raw)
In-Reply-To: <20200715140951.90753-1-jacopo+renesas@jmondi.org>
Convert the ov772x binding document to json-schema and update
the MAINTAINERS file accordingly.
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
---
.../devicetree/bindings/media/i2c/ov772x.txt | 40 ---------
.../devicetree/bindings/media/i2c/ov772x.yaml | 89 +++++++++++++++++++
MAINTAINERS | 2 +-
3 files changed, 90 insertions(+), 41 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/media/i2c/ov772x.txt
create mode 100644 Documentation/devicetree/bindings/media/i2c/ov772x.yaml
diff --git a/Documentation/devicetree/bindings/media/i2c/ov772x.txt b/Documentation/devicetree/bindings/media/i2c/ov772x.txt
deleted file mode 100644
index 0b3ede5b8e6a..000000000000
--- a/Documentation/devicetree/bindings/media/i2c/ov772x.txt
+++ /dev/null
@@ -1,40 +0,0 @@
-* Omnivision OV7720/OV7725 CMOS sensor
-
-The Omnivision OV7720/OV7725 sensor supports multiple resolutions output,
-such as VGA, QVGA, and any size scaling down from CIF to 40x30. It also can
-support the YUV422, RGB565/555/444, GRB422 or raw RGB output formats.
-
-Required Properties:
-- compatible: shall be one of
- "ovti,ov7720"
- "ovti,ov7725"
-- clocks: reference to the xclk input clock.
-
-Optional Properties:
-- reset-gpios: reference to the GPIO connected to the RSTB pin which is
- active low, if any.
-- powerdown-gpios: reference to the GPIO connected to the PWDN pin which is
- active high, if any.
-
-The device node shall contain one 'port' child node with one child 'endpoint'
-subnode for its digital output video port, in accordance with the video
-interface bindings defined in Documentation/devicetree/bindings/media/
-video-interfaces.txt.
-
-Example:
-
-&i2c0 {
- ov772x: camera@21 {
- compatible = "ovti,ov7725";
- reg = <0x21>;
- reset-gpios = <&axi_gpio_0 0 GPIO_ACTIVE_LOW>;
- powerdown-gpios = <&axi_gpio_0 1 GPIO_ACTIVE_LOW>;
- clocks = <&xclk>;
-
- port {
- ov772x_0: endpoint {
- remote-endpoint = <&vcap1_in0>;
- };
- };
- };
-};
diff --git a/Documentation/devicetree/bindings/media/i2c/ov772x.yaml b/Documentation/devicetree/bindings/media/i2c/ov772x.yaml
new file mode 100644
index 000000000000..cb8d68f807c4
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/ov772x.yaml
@@ -0,0 +1,89 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/ov772x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Omnivision OV7720/OV7725 CMOS sensor
+
+maintainers:
+ - Jacopo Mondi <jacopo@jmondi.org>
+
+description: -|
+ The Omnivision OV7720/OV7725 sensor supports multiple resolutions output,
+ such as VGA, QVGA, and any size scaling down from CIF to 40x30. It also can
+ support the YUV422, RGB565/555/444, GRB422 or raw RGB output formats.
+
+properties:
+ compatible:
+ oneOf:
+ - const: ovti,ov7720
+ - const: ovti,ov7725
+
+ reg:
+ description: I2C device address
+ maxItems: 1
+
+ clocks:
+ description: Reference to the xclk clock.
+ maxItems: 1
+
+ reset-gpios:
+ description: -|
+ Reference to the GPIO connected to the RSTB pin which is active low.
+ maxItems: 1
+
+ powerdown-gpios:
+ description: -|
+ Reference to the GPIO connected to the PWDN pin which is active high.
+ maxItems: 1
+
+ port:
+ type: object
+ description: |
+ The device node must contain one 'port' child node for its digital output
+ video port, in accordance with the video interface bindings defined in
+ Documentation/devicetree/bindings/media/video-interfaces.txt.
+
+ properties:
+ endpoint:
+ type: object
+ properties:
+ remote-endpoint:
+ description: A phandle to the bus receiver's endpoint node.
+
+ required:
+ - remote-endpoint
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - reset-gpios
+ - powerdown-gpios
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ i2c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ov772x: camera@21 {
+ compatible = "ovti,ov7725";
+ reg = <0x21>;
+ reset-gpios = <&axi_gpio_0 0 GPIO_ACTIVE_LOW>;
+ powerdown-gpios = <&axi_gpio_0 1 GPIO_ACTIVE_LOW>;
+ clocks = <&xclk>;
+
+ port {
+ ov772x_0: endpoint {
+ remote-endpoint = <&vcap1_in0>;
+ };
+ };
+ };
+ };
+
+...
diff --git a/MAINTAINERS b/MAINTAINERS
index efd9cc9c44c9..b4670904b014 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -12659,7 +12659,7 @@ M: Jacopo Mondi <jacopo@jmondi.org>
L: linux-media@vger.kernel.org
S: Odd fixes
T: git git://linuxtv.org/media_tree.git
-F: Documentation/devicetree/bindings/media/i2c/ov772x.txt
+F: Documentation/devicetree/bindings/media/i2c/ov772x.yaml
F: drivers/media/i2c/ov772x.c
F: include/media/i2c/ov772x.h
--
2.27.0
next prev parent reply other threads:[~2020-07-15 14:06 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-15 14:09 [PATCH 0/8] dt-bindings: media: i2c: Convert to json-schema Jacopo Mondi
2020-07-15 14:09 ` [PATCH 1/8] dt-bindings: media: ov5640: " Jacopo Mondi
2020-07-15 17:04 ` Steve Longerbeam
2020-07-16 7:06 ` Jacopo Mondi
2020-07-16 1:53 ` Laurent Pinchart
2020-07-16 7:04 ` Jacopo Mondi
2020-07-16 13:08 ` Laurent Pinchart
2020-07-16 7:52 ` Geert Uytterhoeven
2020-07-16 14:51 ` Rob Herring
2020-07-15 14:09 ` [PATCH 2/8] dt-bindings: media: ov5645: " Jacopo Mondi
2020-07-15 15:31 ` Manivannan Sadhasivam
2020-07-15 14:09 ` [PATCH 3/8] dt-bindings: media: mt9v111: " Jacopo Mondi
2020-07-15 14:09 ` [PATCH 4/8] dt-bindings: media: imx290: " Jacopo Mondi
2020-07-15 14:09 ` [PATCH 5/8] dt-bindings: media: imx274: " Jacopo Mondi
2020-07-15 14:09 ` [PATCH 6/8] dt-bindings: media: imx214: " Jacopo Mondi
2020-07-15 14:09 ` Jacopo Mondi [this message]
2020-07-15 14:09 ` [PATCH 8/8] dt-bindings: media: i2c: Add prefix to yaml bindings Jacopo Mondi
2020-08-17 15:12 ` [PATCH 0/8] dt-bindings: media: i2c: Convert to json-schema Jacopo Mondi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200715140951.90753-8-jacopo+renesas@jmondi.org \
--to=jacopo+renesas@jmondi.org \
--cc=devicetree@vger.kernel.org \
--cc=hverkuil-cisco@xs4all.nl \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-media@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=robh+dt@kernel.org \
--cc=sakari.ailus@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).