Re: [PATCH 04/13] dt-bindings: media: ti,cal: Remove sensor from example

[Laurent Pinchart <laurent.pinchart@ideasonboard.com>]

Hi Jacopo,

Thank you for the patch.

On Fri, Jul 17, 2020 at 03:28:50PM +0200, Jacopo Mondi wrote:
> The newly introduced dt-schema bindings for the ov5640 image
> sensor triggered a warning in the ti,cal.yaml bindings file, which
> has a camera sensor node marked compatible with the sensor.
> 
> As in the example is enough to report a node for the device that
> the bindings is about, and maintaining the sensor node up-to-date
> is a non-necessary burden, remove the image sensor node from the
> ti,cal bindings file.

The sensor node in the example gives a bit more clarity, but it's also
not super important. I'll let Tomi decide if he wants to keep it (and
thus get it fixed), or if he's fine dropping it.

Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

> Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
> ---
>  .../devicetree/bindings/media/ti,cal.yaml     | 22 -------------------
>  1 file changed, 22 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/media/ti,cal.yaml b/Documentation/devicetree/bindings/media/ti,cal.yaml
> index 5e066629287d..fe5c74dd246e 100644
> --- a/Documentation/devicetree/bindings/media/ti,cal.yaml
> +++ b/Documentation/devicetree/bindings/media/ti,cal.yaml
> @@ -177,26 +177,4 @@ examples:
>          };
>      };
> 
> -    i2c {
> -        clock-frequency = <400000>;
> -        #address-cells = <1>;
> -        #size-cells = <0>;
> -
> -        camera-sensor@3c {
> -               compatible = "ovti,ov5640";
> -               reg = <0x3c>;
> -
> -               clocks = <&clk_ov5640_fixed>;
> -               clock-names = "xclk";
> -
> -               port {
> -                    csi2_cam0: endpoint {
> -                            remote-endpoint = <&csi2_phy0>;
> -                            clock-lanes = <0>;
> -                            data-lanes = <1 2>;
> -                    };
> -               };
> -        };
> -    };
> -
>  ...

-- 
Regards,

Laurent Pinchart