devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Kurt Kanzenbach <kurt@linutronix.de>
To: Andrew Lunn <andrew@lunn.ch>,
	Vivien Didelot <vivien.didelot@gmail.com>,
	Florian Fainelli <f.fainelli@gmail.com>,
	Vladimir Oltean <olteanv@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>,
	Jakub Kicinski <kuba@kernel.org>,
	netdev@vger.kernel.org, Rob Herring <robh+dt@kernel.org>,
	devicetree@vger.kernel.org,
	Sebastian Andrzej Siewior <bigeasy@linutronix.de>,
	Richard Cochran <richardcochran@gmail.com>,
	Kamil Alkhouri <kamil.alkhouri@hs-offenburg.de>,
	ilias.apalodimas@linaro.org, Kurt Kanzenbach <kurt@linutronix.de>
Subject: [PATCH net-next v6 0/7] Hirschmann Hellcreek DSA driver
Date: Sun,  4 Oct 2020 13:29:04 +0200	[thread overview]
Message-ID: <20201004112911.25085-1-kurt@linutronix.de> (raw)

Hi,

this series adds a DSA driver for the Hirschmann Hellcreek TSN switch
IP. Characteristics of that IP:

 * Full duplex Ethernet interface at 100/1000 Mbps on three ports
 * IEEE 802.1Q-compliant Ethernet Switch
 * IEEE 802.1Qbv Time-Aware scheduling support
 * IEEE 1588 and IEEE 802.1AS support

That IP is used e.g. in

 https://www.arrow.com/en/campaigns/arrow-kairos

Due to the hardware setup the switch driver is implemented using DSA. A special
tagging protocol is leveraged. Furthermore, this driver supports PTP and
hardware timestamping.

This version implements the DSA configure_vlan_while_not_filtering behavior by
caching any VLAN requests when vlan_filtering is not set and restoring it as
soon as it is. Due to the lack of a port forwarding matrix in hardware, VLANs
are used to reflect the initial DSA/switchdev port separation. Patch two is the
only one which changed and has to be re-reviewed. Thanks!

This work is part of the AccessTSN project: https://www.accesstsn.com/

The previous versions can be found here:

 * https://lkml.kernel.org/netdev/20200618064029.32168-1-kurt@linutronix.de/
 * https://lkml.kernel.org/netdev/20200710113611.3398-1-kurt@linutronix.de/
 * https://lkml.kernel.org/netdev/20200723081714.16005-1-kurt@linutronix.de/
 * https://lkml.kernel.org/netdev/20200820081118.10105-1-kurt@linutronix.de/
 * https://lkml.kernel.org/netdev/20200901125014.17801-1-kurt@linutronix.de/
 * https://lkml.kernel.org/netdev/20200904062739.3540-1-kurt@linutronix.de/

Changes since v5:

 * Implement configure_vlan_while_not_filtering behavior (Vladimir Oltean)
 * Minor cleanups

Changes since v4:

 * Fix W=1 compiler warnings (kernel test robot)
 * Add tags

Changes since v3:

 * Drop TAPRIO support (David Miller)
   => Switch to mutexes due to the lack of hrtimers
 * Use more specific compatible strings and add platform data (Andrew Lunn)
 * Fix Kconfig ordering (Andrew Lunn)

Changes since v2:

 * Make it compile by getting all requirements merged first (Jakub Kicinski, David Miller)
 * Use "tsn" for TSN register set (Rob Herring)
 * Fix DT binding issues (Rob Herring)

Changes since v1:

 * Code simplifications (Florian Fainelli, Vladimir Oltean)
 * Fix issues with hellcreek.yaml bindings (Florian Fainelli)
 * Clear reserved field in ptp v2 event messages (Richard Cochran)
 * Make use of generic ptp parsing function (Richard Cochran, Vladimir Oltean)
 * Fix Kconfig (Florian Fainelli)
 * Add tags (Florian Fainelli, Rob Herring, Richard Cochran) 

Changes since RFC ordered by reviewers:

 * Andrew Lunn
   * Use dev_dbg for debug messages
   * Get rid of __ function names where possible
   * Use reverse xmas tree variable ordering
   * Remove redundant/useless checks
   * Improve comments e.g. for PTP
   * Fix Kconfig ordering
   * Make LED handling more generic and provide info via DT
   * Setup advertisement of PHYs according to hardware
   * Drop debugfs patch
 * Jakub Kicinski
   * Fix compiler warnings
 * Florian Fainelli
   * Switch to YAML DT bindings
 * Richard Cochran
   * Fix typo
   * Add missing NULL checks

Kamil Alkhouri (2):
  net: dsa: hellcreek: Add PTP clock support
  net: dsa: hellcreek: Add support for hardware timestamping

Kurt Kanzenbach (5):
  net: dsa: Add tag handling for Hirschmann Hellcreek switches
  net: dsa: Add DSA driver for Hirschmann Hellcreek switches
  net: dsa: hellcreek: Add PTP status LEDs
  dt-bindings: Add vendor prefix for Hirschmann
  dt-bindings: net: dsa: Add documentation for Hellcreek switches

 .../bindings/net/dsa/hellcreek.yaml           |  127 ++
 .../devicetree/bindings/vendor-prefixes.yaml  |    2 +
 drivers/net/dsa/Kconfig                       |    2 +
 drivers/net/dsa/Makefile                      |    1 +
 drivers/net/dsa/hirschmann/Kconfig            |    9 +
 drivers/net/dsa/hirschmann/Makefile           |    5 +
 drivers/net/dsa/hirschmann/hellcreek.c        | 1371 +++++++++++++++++
 drivers/net/dsa/hirschmann/hellcreek.h        |  292 ++++
 .../net/dsa/hirschmann/hellcreek_hwtstamp.c   |  479 ++++++
 .../net/dsa/hirschmann/hellcreek_hwtstamp.h   |   58 +
 drivers/net/dsa/hirschmann/hellcreek_ptp.c    |  452 ++++++
 drivers/net/dsa/hirschmann/hellcreek_ptp.h    |   76 +
 .../platform_data/hirschmann-hellcreek.h      |   23 +
 include/net/dsa.h                             |    2 +
 net/dsa/Kconfig                               |    6 +
 net/dsa/Makefile                              |    1 +
 net/dsa/tag_hellcreek.c                       |  101 ++
 17 files changed, 3007 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/net/dsa/hellcreek.yaml
 create mode 100644 drivers/net/dsa/hirschmann/Kconfig
 create mode 100644 drivers/net/dsa/hirschmann/Makefile
 create mode 100644 drivers/net/dsa/hirschmann/hellcreek.c
 create mode 100644 drivers/net/dsa/hirschmann/hellcreek.h
 create mode 100644 drivers/net/dsa/hirschmann/hellcreek_hwtstamp.c
 create mode 100644 drivers/net/dsa/hirschmann/hellcreek_hwtstamp.h
 create mode 100644 drivers/net/dsa/hirschmann/hellcreek_ptp.c
 create mode 100644 drivers/net/dsa/hirschmann/hellcreek_ptp.h
 create mode 100644 include/linux/platform_data/hirschmann-hellcreek.h
 create mode 100644 net/dsa/tag_hellcreek.c

-- 
2.20.1


             reply	other threads:[~2020-10-04 11:30 UTC|newest]

Thread overview: 51+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-10-04 11:29 Kurt Kanzenbach [this message]
2020-10-04 11:29 ` [PATCH net-next v6 1/7] net: dsa: Add tag handling for Hirschmann Hellcreek switches Kurt Kanzenbach
2020-10-04 11:56   ` Vladimir Oltean
2020-10-05  6:14     ` Kurt Kanzenbach
2020-10-04 11:29 ` [PATCH net-next v6 2/7] net: dsa: Add DSA driver " Kurt Kanzenbach
2020-10-04 12:56   ` Vladimir Oltean
2020-10-06  6:09     ` Kurt Kanzenbach
2020-10-06  9:20       ` Vladimir Oltean
2020-10-06 10:13         ` Kurt Kanzenbach
2020-10-06 11:32           ` Vladimir Oltean
2020-10-06 12:37             ` Vladimir Oltean
2020-10-06 13:23             ` Kurt Kanzenbach
2020-10-06 13:42               ` Vladimir Oltean
2020-10-06 14:05                 ` Kurt Kanzenbach
2020-10-06 14:10                   ` Vladimir Oltean
2020-10-06 13:56               ` Vladimir Oltean
2020-10-06 14:13                 ` Kurt Kanzenbach
2020-10-11 12:29                 ` Kurt Kanzenbach
2020-10-11 15:30                   ` Vladimir Oltean
2020-10-12  5:37                     ` Kurt Kanzenbach
2020-10-16 12:11                       ` Kurt Kanzenbach
2020-10-16 15:43                         ` Vladimir Oltean
2020-10-16 16:56                           ` Florian Fainelli
2020-10-17 10:06                             ` Kurt Kanzenbach
2020-10-17 15:57                             ` Vladimir Oltean
2020-10-08 11:49           ` Vladimir Oltean
2020-10-09  5:58             ` Kurt Kanzenbach
2020-10-04 11:29 ` [PATCH net-next v6 3/7] net: dsa: hellcreek: Add PTP clock support Kurt Kanzenbach
2020-10-04 11:29 ` [PATCH net-next v6 4/7] net: dsa: hellcreek: Add support for hardware timestamping Kurt Kanzenbach
2020-10-04 14:30   ` Vladimir Oltean
2020-10-06  6:27     ` Kurt Kanzenbach
2020-10-06  7:28       ` Vladimir Oltean
2020-10-06 13:30         ` Kurt Kanzenbach
2020-10-06 13:32           ` Vladimir Oltean
2020-10-06 13:56             ` Kurt Kanzenbach
2020-10-06 14:01               ` Vladimir Oltean
2020-10-07 10:39                 ` Kurt Kanzenbach
2020-10-07 10:54                   ` Vladimir Oltean
2020-10-08  8:34                     ` Kurt Kanzenbach
2020-10-08  9:44                       ` Vladimir Oltean
2020-10-08 10:01                         ` Kurt Kanzenbach
2020-10-08 12:55                           ` Kamil Alkhouri
2020-10-08 15:09                             ` Vladimir Oltean
2020-10-12 12:53                               ` Kamil Alkhouri
2020-10-12 21:42                                 ` Richard Cochran
2020-10-14  9:57                                   ` Vladimir Oltean
2020-10-14 11:01                                     ` Richard Cochran
2020-10-14 11:37                                       ` Kurt Kanzenbach
2020-10-04 11:29 ` [PATCH net-next v6 5/7] net: dsa: hellcreek: Add PTP status LEDs Kurt Kanzenbach
2020-10-04 11:29 ` [PATCH net-next v6 6/7] dt-bindings: Add vendor prefix for Hirschmann Kurt Kanzenbach
2020-10-04 11:29 ` [PATCH net-next v6 7/7] dt-bindings: net: dsa: Add documentation for Hellcreek switches Kurt Kanzenbach

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201004112911.25085-1-kurt@linutronix.de \
    --to=kurt@linutronix.de \
    --cc=andrew@lunn.ch \
    --cc=bigeasy@linutronix.de \
    --cc=davem@davemloft.net \
    --cc=devicetree@vger.kernel.org \
    --cc=f.fainelli@gmail.com \
    --cc=ilias.apalodimas@linaro.org \
    --cc=kamil.alkhouri@hs-offenburg.de \
    --cc=kuba@kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=olteanv@gmail.com \
    --cc=richardcochran@gmail.com \
    --cc=robh+dt@kernel.org \
    --cc=vivien.didelot@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).