devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Maxime Ripard <maxime@cerno.tech>
To: Samuel Holland <samuel@sholland.org>
Cc: "Clément Péron" <peron.clem@gmail.com>,
	"Chen-Yu Tsai" <wens@csie.org>,
	"Rob Herring" <robh+dt@kernel.org>,
	"Mark Brown" <broonie@kernel.org>,
	"Liam Girdwood" <lgirdwood@gmail.com>,
	"Jaroslav Kysela" <perex@perex.cz>,
	"Takashi Iwai" <tiwai@suse.com>,
	"Marcus Cooper" <codekipper@gmail.com>,
	"Jernej Skrabec" <jernej.skrabec@siol.net>,
	Linux-ALSA <alsa-devel@alsa-project.org>,
	devicetree <devicetree@vger.kernel.org>,
	linux-arm-kernel <linux-arm-kernel@lists.infradead.org>,
	linux-kernel <linux-kernel@vger.kernel.org>,
	linux-sunxi <linux-sunxi@googlegroups.com>
Subject: Re: [PATCH v6 02/14] ASoC: sun4i-i2s: Change set_chan_cfg() params
Date: Mon, 19 Oct 2020 12:24:43 +0200	[thread overview]
Message-ID: <20201019102443.uk3t2jcqc7x7rxdi@gilmour.lan> (raw)
In-Reply-To: <0d6f0693-5ca9-9b48-4d33-a969bd5b1b1b@sholland.org>

[-- Attachment #1: Type: text/plain, Size: 7447 bytes --]

Hi Samuel,

On Mon, Oct 12, 2020 at 08:15:30PM -0500, Samuel Holland wrote:
> On 10/12/20 7:15 AM, Maxime Ripard wrote:
> > Hi,
> > 
> > On Mon, Oct 05, 2020 at 03:23:12PM +0200, Clément Péron wrote:
> >> On Mon, 5 Oct 2020 at 14:13, Maxime Ripard <maxime@cerno.tech> wrote:
> >>>
> >>> On Sat, Oct 03, 2020 at 04:19:38PM +0200, Clément Péron wrote:
> >>>> As slots and slot_width can be set manually using set_tdm().
> >>>> These values are then kept in sun4i_i2s struct.
> >>>> So we need to check if these values are setted or not
> >>>> in the struct.
> >>>>
> >>>> Avoid to check for this logic in set_chan_cfg(). This will
> >>>> duplicate the same check instead pass the required values
> >>>> as params to set_chan_cfg().
> >>>>
> >>>> This will also avoid a bug when we will enable 20/24bits support,
> >>>> i2s->slot_width is not actually used in the lrck_period computation.
> >>>>
> >>>> Suggested-by: Samuel Holland <samuel@sholland.org>
> >>>> Signed-off-by: Clément Péron <peron.clem@gmail.com>
> >>>> ---
> >>>>  sound/soc/sunxi/sun4i-i2s.c | 36 ++++++++++++++----------------------
> >>>>  1 file changed, 14 insertions(+), 22 deletions(-)
> >>>>
> >>>> diff --git a/sound/soc/sunxi/sun4i-i2s.c b/sound/soc/sunxi/sun4i-i2s.c
> >>>> index c5ccd423e6d3..1f577dbc20a6 100644
> >>>> --- a/sound/soc/sunxi/sun4i-i2s.c
> >>>> +++ b/sound/soc/sunxi/sun4i-i2s.c
> >>>> @@ -177,8 +177,9 @@ struct sun4i_i2s_quirks {
> >>>>       unsigned long (*get_bclk_parent_rate)(const struct sun4i_i2s *);
> >>>>       s8      (*get_sr)(const struct sun4i_i2s *, int);
> >>>>       s8      (*get_wss)(const struct sun4i_i2s *, int);
> >>>> -     int     (*set_chan_cfg)(const struct sun4i_i2s *,
> >>>> -                             const struct snd_pcm_hw_params *);
> >>>> +     int     (*set_chan_cfg)(const struct sun4i_i2s *i2s,
> >>>> +                             unsigned int channels,  unsigned int slots,
> >>>> +                             unsigned int slot_width);
> >>>>       int     (*set_fmt)(const struct sun4i_i2s *, unsigned int);
> >>>>  };
> >>>>
> >>>> @@ -414,10 +415,9 @@ static s8 sun8i_i2s_get_sr_wss(const struct sun4i_i2s *i2s, int width)
> >>>>  }
> >>>>
> >>>>  static int sun4i_i2s_set_chan_cfg(const struct sun4i_i2s *i2s,
> >>>> -                               const struct snd_pcm_hw_params *params)
> >>>> +                               unsigned int channels, unsigned int slots,
> >>>> +                               unsigned int slot_width)
> >>>>  {
> >>>> -     unsigned int channels = params_channels(params);
> >>>> -
> >>>>       /* Map the channels for playback and capture */
> >>>>       regmap_write(i2s->regmap, SUN4I_I2S_TX_CHAN_MAP_REG, 0x76543210);
> >>>>       regmap_write(i2s->regmap, SUN4I_I2S_RX_CHAN_MAP_REG, 0x00003210);
> >>>> @@ -434,15 +434,11 @@ static int sun4i_i2s_set_chan_cfg(const struct sun4i_i2s *i2s,
> >>>>  }
> >>>>
> >>>>  static int sun8i_i2s_set_chan_cfg(const struct sun4i_i2s *i2s,
> >>>> -                               const struct snd_pcm_hw_params *params)
> >>>> +                               unsigned int channels, unsigned int slots,
> >>>> +                               unsigned int slot_width)
> >>>>  {
> >>>> -     unsigned int channels = params_channels(params);
> >>>> -     unsigned int slots = channels;
> >>>>       unsigned int lrck_period;
> >>>>
> >>>> -     if (i2s->slots)
> >>>> -             slots = i2s->slots;
> >>>> -
> >>>>       /* Map the channels for playback and capture */
> >>>>       regmap_write(i2s->regmap, SUN8I_I2S_TX_CHAN_MAP_REG, 0x76543210);
> >>>>       regmap_write(i2s->regmap, SUN8I_I2S_RX_CHAN_MAP_REG, 0x76543210);
> >>>> @@ -467,11 +463,11 @@ static int sun8i_i2s_set_chan_cfg(const struct sun4i_i2s *i2s,
> >>>>       case SND_SOC_DAIFMT_DSP_B:
> >>>>       case SND_SOC_DAIFMT_LEFT_J:
> >>>>       case SND_SOC_DAIFMT_RIGHT_J:
> >>>> -             lrck_period = params_physical_width(params) * slots;
> >>>> +             lrck_period = slot_width * slots;
> >>>>               break;
> >>>>
> >>>>       case SND_SOC_DAIFMT_I2S:
> >>>> -             lrck_period = params_physical_width(params);
> >>>> +             lrck_period = slot_width;
> >>>>               break;
> >>>>
> >>>>       default:
> >>>> @@ -490,15 +486,11 @@ static int sun8i_i2s_set_chan_cfg(const struct sun4i_i2s *i2s,
> >>>>  }
> >>>>
> >>>>  static int sun50i_h6_i2s_set_chan_cfg(const struct sun4i_i2s *i2s,
> >>>> -                                   const struct snd_pcm_hw_params *params)
> >>>> +                                   unsigned int channels, unsigned int slots,
> >>>> +                                   unsigned int slot_width)
> >>>>  {
> >>>> -     unsigned int channels = params_channels(params);
> >>>> -     unsigned int slots = channels;
> >>>>       unsigned int lrck_period;
> >>>>
> >>>> -     if (i2s->slots)
> >>>> -             slots = i2s->slots;
> >>>> -
> >>>>       /* Map the channels for playback and capture */
> >>>>       regmap_write(i2s->regmap, SUN50I_H6_I2S_TX_CHAN_MAP0_REG, 0xFEDCBA98);
> >>>>       regmap_write(i2s->regmap, SUN50I_H6_I2S_TX_CHAN_MAP1_REG, 0x76543210);
> >>>> @@ -525,11 +517,11 @@ static int sun50i_h6_i2s_set_chan_cfg(const struct sun4i_i2s *i2s,
> >>>>       case SND_SOC_DAIFMT_DSP_B:
> >>>>       case SND_SOC_DAIFMT_LEFT_J:
> >>>>       case SND_SOC_DAIFMT_RIGHT_J:
> >>>> -             lrck_period = params_physical_width(params) * slots;
> >>>> +             lrck_period = slot_width * slots;
> >>>>               break;
> >>>>
> >>>>       case SND_SOC_DAIFMT_I2S:
> >>>> -             lrck_period = params_physical_width(params);
> >>>> +             lrck_period = slot_width;
> >>>>               break;
> >>>>
> >>>>       default:
> >>>> @@ -565,7 +557,7 @@ static int sun4i_i2s_hw_params(struct snd_pcm_substream *substream,
> >>>>       if (i2s->slot_width)
> >>>>               slot_width = i2s->slot_width;
> >>>>
> >>>> -     ret = i2s->variant->set_chan_cfg(i2s, params);
> >>>> +     ret = i2s->variant->set_chan_cfg(i2s, channels, slots, slot_width);
> >>>
> >>> Isn't slots and slot_width set to 0 here ?
> >>
> >> No, there is still a check before calling the set_cfg function.
> >>
> >>   unsigned int slot_width = params_physical_width(params);
> >>   unsigned int channels = params_channels(params);
> >>   unsigned int slots = channels;
> >>
> >>   if (i2s->slots)
> >>   slots = i2s->slots;
> >>
> >>   if (i2s->slot_width)
> >>   slot_width = i2s->slot_width;
> >>
> >> ret = i2s->variant->set_chan_cfg(i2s, channels, slots, slot_width);
> >>
> >> So slot_width will be equal to params_physical_width(params);
> >> like before
> > 
> > Still, it's not obvious what slots and slot_width are going to be set to
> > in a non-TDM setup where that doesn't really make much sense.
> 
> My understanding is:
> 
> "slots" is channels per frame + padding slots, regardless of format.
> "slot_width" is bits per sample + padding bits, regardless of format.
> 
> Some formats may require or prohibit certain padding, but that has no
> effect on the definitions.
> 
> That seems clear to me? At least that's what I implemented (and you
> acked) in sun8i-codec.

Yeah I guess you're right. I'd still like at least a comment on top of
the function making that clear so that no-one's confused

Maxime

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

  reply	other threads:[~2020-10-19 10:26 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-10-03 14:19 [PATCH v6 00/14] Add Allwinner H3/H5/H6/A64 HDMI audio Clément Péron
2020-10-03 14:19 ` [PATCH v6 01/14] ASoC: sun4i-i2s: Add support for H6 I2S Clément Péron
2020-10-03 14:19 ` [PATCH v6 02/14] ASoC: sun4i-i2s: Change set_chan_cfg() params Clément Péron
2020-10-05 12:13   ` Maxime Ripard
2020-10-05 13:23     ` Clément Péron
2020-10-12 12:15       ` Maxime Ripard
2020-10-13  1:15         ` Samuel Holland
2020-10-19 10:24           ` Maxime Ripard [this message]
2020-10-06  5:03     ` Samuel Holland
2020-10-12 12:20       ` Maxime Ripard
2020-10-03 14:19 ` [PATCH v6 03/14] ASoC: sun4i-i2s: Change get_sr() and get_wss() to be more explicit Clément Péron
2020-10-05 12:14   ` Maxime Ripard
2020-10-05 13:35     ` Clément Péron
2020-10-03 14:19 ` [PATCH v6 04/14] ASoC: sun4i-i2s: Set sign extend sample Clément Péron
2020-10-03 14:19 ` [PATCH v6 05/14] ASoc: sun4i-i2s: Add 20 and 24 bit support Clément Péron
2020-10-03 14:19 ` [PATCH v6 06/14] ASoC: sun4i-i2s: Fix sun8i volatile regs Clément Péron
2020-10-03 14:19 ` [PATCH v6 07/14] ASoC: sun4i-i2s: Fix setting of FIFO modes Clément Péron
2020-10-03 14:19 ` [PATCH v6 08/14] ASoC: sun4i-i2s: fix coding-style for callback definition Clément Péron
2020-10-05 12:14   ` Maxime Ripard
2020-10-03 14:19 ` [PATCH v6 09/14] dt-bindings: ASoC: sun4i-i2s: Add H6 compatible Clément Péron
2020-10-03 14:19 ` [PATCH v6 10/14] arm64: dts: allwinner: h6: Add I2S1 node Clément Péron
2020-10-03 14:19 ` [PATCH v6 11/14] arm64: dts: allwinner: a64: Add I2S2 node Clément Péron
2020-10-03 14:19 ` [PATCH v6 12/14] arm64: defconfig: Enable Allwinner i2s driver Clément Péron
2020-10-03 14:19 ` [PATCH v6 13/14] dt-bindings: sound: sun4i-i2s: Document H3 with missing RX channel possibility Clément Péron
2020-10-06 21:11   ` Rob Herring
2020-10-03 14:19 ` [PATCH v6 14/14] arm: dts: sunxi: h3/h5: Add I2S2 node Clément Péron

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201019102443.uk3t2jcqc7x7rxdi@gilmour.lan \
    --to=maxime@cerno.tech \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@kernel.org \
    --cc=codekipper@gmail.com \
    --cc=devicetree@vger.kernel.org \
    --cc=jernej.skrabec@siol.net \
    --cc=lgirdwood@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sunxi@googlegroups.com \
    --cc=perex@perex.cz \
    --cc=peron.clem@gmail.com \
    --cc=robh+dt@kernel.org \
    --cc=samuel@sholland.org \
    --cc=tiwai@suse.com \
    --cc=wens@csie.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).