From: Paul Cercueil <paul@crapouillou.net>
To: Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>
Cc: linux-clk@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-mips@vger.kernel.org,
list@opendingux.net, 周琰杰 <zhouyanjie@wanyeetech.com>,
"Paul Cercueil" <paul@crapouillou.net>
Subject: [PATCH v2 4/6] clk: ingenic: Remove pll_info.no_bypass_bit
Date: Sun, 30 May 2021 17:49:21 +0100 [thread overview]
Message-ID: <20210530164923.18134-5-paul@crapouillou.net> (raw)
In-Reply-To: <20210530164923.18134-1-paul@crapouillou.net>
We can express that a PLL has no bypass bit by simply setting the
.bypass_bit field to a negative value.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
---
drivers/clk/ingenic/cgu.c | 4 ++--
drivers/clk/ingenic/cgu.h | 7 +++----
drivers/clk/ingenic/jz4770-cgu.c | 3 +--
3 files changed, 6 insertions(+), 8 deletions(-)
diff --git a/drivers/clk/ingenic/cgu.c b/drivers/clk/ingenic/cgu.c
index 7686072aff8f..58f7ab5cf0fe 100644
--- a/drivers/clk/ingenic/cgu.c
+++ b/drivers/clk/ingenic/cgu.c
@@ -99,7 +99,7 @@ ingenic_pll_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
od_enc = ctl >> pll_info->od_shift;
od_enc &= GENMASK(pll_info->od_bits - 1, 0);
- if (!pll_info->no_bypass_bit) {
+ if (pll_info->bypass_bit >= 0) {
ctl = readl(cgu->base + pll_info->bypass_reg);
bypass = !!(ctl & BIT(pll_info->bypass_bit));
@@ -226,7 +226,7 @@ static int ingenic_pll_enable(struct clk_hw *hw)
u32 ctl;
spin_lock_irqsave(&cgu->lock, flags);
- if (!pll_info->no_bypass_bit) {
+ if (pll_info->bypass_bit >= 0) {
ctl = readl(cgu->base + pll_info->bypass_reg);
ctl &= ~BIT(pll_info->bypass_bit);
diff --git a/drivers/clk/ingenic/cgu.h b/drivers/clk/ingenic/cgu.h
index 44d97a259692..10521d1b7b12 100644
--- a/drivers/clk/ingenic/cgu.h
+++ b/drivers/clk/ingenic/cgu.h
@@ -39,10 +39,10 @@
* their encoded values in the PLL control register, or -1 for
* unsupported values
* @bypass_reg: the offset of the bypass control register within the CGU
- * @bypass_bit: the index of the bypass bit in the PLL control register
+ * @bypass_bit: the index of the bypass bit in the PLL control register, or
+ * -1 if there is no bypass bit
* @enable_bit: the index of the enable bit in the PLL control register
* @stable_bit: the index of the stable bit in the PLL control register
- * @no_bypass_bit: if set, the PLL has no bypass functionality
*/
struct ingenic_cgu_pll_info {
unsigned reg;
@@ -52,10 +52,9 @@ struct ingenic_cgu_pll_info {
u8 n_shift, n_bits, n_offset;
u8 od_shift, od_bits, od_max;
unsigned bypass_reg;
- u8 bypass_bit;
+ s8 bypass_bit;
u8 enable_bit;
u8 stable_bit;
- bool no_bypass_bit;
};
/**
diff --git a/drivers/clk/ingenic/jz4770-cgu.c b/drivers/clk/ingenic/jz4770-cgu.c
index 381a27f20b51..2321742b3471 100644
--- a/drivers/clk/ingenic/jz4770-cgu.c
+++ b/drivers/clk/ingenic/jz4770-cgu.c
@@ -139,8 +139,7 @@ static const struct ingenic_cgu_clk_info jz4770_cgu_clocks[] = {
.od_bits = 2,
.od_max = 8,
.od_encoding = pll_od_encoding,
- .bypass_reg = CGU_REG_CPPCR1,
- .no_bypass_bit = true,
+ .bypass_bit = -1,
.enable_bit = 7,
.stable_bit = 6,
},
--
2.30.2
next prev parent reply other threads:[~2021-05-30 16:50 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-30 16:49 [PATCH v2 0/6] clk: Ingenic JZ4760(B) support Paul Cercueil
2021-05-30 16:49 ` [PATCH v2 1/6] dt-bindings: clock: ingenic: Add ingenic,jz4760{,b}-cgu compatibles Paul Cercueil
2021-06-28 2:49 ` Stephen Boyd
2021-05-30 16:49 ` [PATCH v2 2/6] clk: Support bypassing dividers Paul Cercueil
2021-06-28 2:49 ` Stephen Boyd
2021-05-30 16:49 ` [PATCH v2 3/6] clk: ingenic: Read bypass register only when there is one Paul Cercueil
2021-06-01 14:08 ` Zhou Yanjie
2021-06-28 2:49 ` Stephen Boyd
2021-05-30 16:49 ` Paul Cercueil [this message]
2021-06-01 14:07 ` [PATCH v2 4/6] clk: ingenic: Remove pll_info.no_bypass_bit Zhou Yanjie
2021-06-28 2:49 ` Stephen Boyd
2021-05-30 16:49 ` [PATCH v2 5/6] clk: ingenic: Support overriding PLLs M/N/OD calc algorithm Paul Cercueil
2021-06-28 2:49 ` Stephen Boyd
2021-05-30 16:49 ` [PATCH v2 6/6] clk: ingenic: Add support for the JZ4760 Paul Cercueil
2021-06-28 2:50 ` Stephen Boyd
2021-06-30 12:18 ` Paul Cercueil
2021-06-22 14:48 ` [PATCH v2 0/6] clk: Ingenic JZ4760(B) support 周琰杰
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210530164923.18134-5-paul@crapouillou.net \
--to=paul@crapouillou.net \
--cc=devicetree@vger.kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mips@vger.kernel.org \
--cc=list@opendingux.net \
--cc=mturquette@baylibre.com \
--cc=sboyd@kernel.org \
--cc=zhouyanjie@wanyeetech.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).