From: Shenghao Ding <13916275206@139.com>
To: broonie@kernel.org, devicetree@vger.kernel.org,
krzysztof.kozlowski+dt@linaro.org, robh+dt@kernel.org,
lgirdwood@gmail.com, perex@perex.cz,
pierre-louis.bossart@linux.intel.com
Cc: kevin-lu@ti.com, shenghao-ding@ti.com,
alsa-devel@alsa-project.org, linux-kernel@vger.kernel.org,
x1077012@ti.com, peeyush@ti.com, navada@ti.com,
gentuser@gmail.com, Ryan_Chu@wistron.com, Sam_Wu@wistron.com,
tiwai@suse.de, Shenghao Ding <13916275206@139.com>
Subject: [PATCH v4 6/6] ASoC: dt-bindings: Add tas2781 amplifier
Date: Sun, 28 May 2023 06:36:32 +0800 [thread overview]
Message-ID: <20230527223632.11781-1-13916275206@139.com> (raw)
Create tas2781.yaml for tas2781 driver.
Signed-off-by: Shenghao Ding <13916275206@139.com>
---
Changes in v4:
- remove '\t' in the file
Changes to be committed:
new file: Documentation/devicetree/bindings/sound/ti,tas2781.yaml
---
.../devicetree/bindings/sound/ti,tas2781.yaml | 88 +++++++++++++++++++
1 file changed, 88 insertions(+)
create mode 100644 Documentation/devicetree/bindings/sound/ti,tas2781.yaml
diff --git a/Documentation/devicetree/bindings/sound/ti,tas2781.yaml b/Documentation/devicetree/bindings/sound/ti,tas2781.yaml
new file mode 100644
index 000000000000..b3dcd7b18f5d
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/ti,tas2781.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2022 - 2023 Texas Instruments Incorporated
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/ti,tas2781.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments TAS2781 SmartAMP
+
+maintainers:
+ - Shenghao Ding <shenghao-ding@ti.com>
+
+description:
+ The TAS2781 is a mono, digital input Class-D audio amplifier
+ optimized for efficiently driving high peak power into small
+ loudspeakers. Integrated an on-chip DSP supports Texas Instruments
+ Smart Amp speaker protection algorithm. The integrated speaker
+ voltage and current sense provides for real time
+ monitoring of loudspeaker behavior.
+
+allOf:
+ - $ref: dai-common.yaml#
+
+properties:
+ '#address-cells':
+ const: 1
+ '#size-cells':
+ const: 0
+
+ compatible:
+ enum:
+ - ti,tas2781
+
+ reg:
+ description:
+ I2C address, in multiple tas2781s case, all the i2c address
+ aggreate as one Audio Device to support multiple audio slots.
+ maxItems: 4
+ items:
+ minimum: 0x38
+ maximum: 0x3f
+
+ reset-gpios:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ ti,broadcast-addr:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Generic I2C address for all the tas2781 devices in
+ purpose of I2C broadcast during the multi-device
+ writes, useless in mono case or remove this item to
+ disable broadcast mode.
+
+ '#sound-dai-cells':
+ const: 1
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ i2c {
+ /* example with quad support, such as tablet or pad device */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ quad: codec@38 {
+ compatible = "ti,tas2781";
+ reg = < 0x38 /* Audio slot 0 */
+ 0x3a /* Audio slot 1 */
+ 0x39 /* Audio slot 2 */
+ 0x3b /* Audio slot 3 */
+ >;
+ #sound-dai-cells = <1>;
+ reset-gpios = < &gpio1 10 GPIO_ACTIVE_HIGH >;
+ interrupt-parent = <&gpio1>;
+ interrupts = <15>;
+ /* Generic I2C addr among all the tas2781s for i2c data broadcast */
+ ti,broadcast-addr = <0x40>;
+ };
+ };
+...
--
2.34.1
next reply other threads:[~2023-05-27 22:37 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-05-27 22:36 Shenghao Ding [this message]
2023-05-30 14:40 ` [PATCH v4 6/6] ASoC: dt-bindings: Add tas2781 amplifier Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230527223632.11781-1-13916275206@139.com \
--to=13916275206@139.com \
--cc=Ryan_Chu@wistron.com \
--cc=Sam_Wu@wistron.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=gentuser@gmail.com \
--cc=kevin-lu@ti.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=navada@ti.com \
--cc=peeyush@ti.com \
--cc=perex@perex.cz \
--cc=pierre-louis.bossart@linux.intel.com \
--cc=robh+dt@kernel.org \
--cc=shenghao-ding@ti.com \
--cc=tiwai@suse.de \
--cc=x1077012@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).