Re: Re: [PATCH v2 14/16] arm: dts: sun8i: h3: enable H3 sid controller

[Paul Kocialkowski <contact-W9ppeneeCTY@public.gmane.org>]

Hi,

On Wed, 2018-07-25 at 11:05 +0200, Emmanuel Vadot wrote:

[...]

>  Hello Paul,
> 
>  I've sent a serie yesterday for SID on A64/H3/H5.
>  https://patchwork.kernel.org/project/linux-arm-kernel/list/?series=761

Awesome, thanks for taking care of that :)

Cheers,

Paul

> > > On 19.04.2018 17:19, Kyle Evans wrote:
> > > > On Thu, Apr 19, 2018 at 10:13 AM, Icenowy Zheng <icenowy-h8G6r0blFSE@public.gmane.org> wrote:
> > > > > 
> > > > > 
> > > > > ? 2018?4?19? GMT+08:00 ??11:11:22, Kyle Evans <kevans-h+KGxgPPiopAfugRpC6u6w@public.gmane.org> ??:
> > > > > > On Mon, Jan 29, 2018 at 6:03 AM, Philipp Rossak <embed3d-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> > > > > > wrote:
> > > > > > > 
> > > > > > > 
> > > > > > > On 29.01.2018 10:52, Maxime Ripard wrote:
> > > > > > > > 
> > > > > > > > On Mon, Jan 29, 2018 at 12:29:17AM +0100, Philipp Rossak wrote:
> > > > > > > > > 
> > > > > > > > > This patch enables the the sid controller in the H3. It can be used
> > > > > > > > > for thermal calibration data.
> > > > > > > > > 
> > > > > > > > > Signed-off-by: Philipp Rossak <embed3d-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> > > > > > > > > ---
> > > > > > > > >    arch/arm/boot/dts/sun8i-h3.dtsi | 7 +++++++
> > > > > > > > >    1 file changed, 7 insertions(+)
> > > > > > > > > 
> > > > > > > > > diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi
> > > > > > > > > b/arch/arm/boot/dts/sun8i-h3.dtsi
> > > > > > > > > index 3f83f6a27c74..9bb5cc29fec5 100644
> > > > > > > > > --- a/arch/arm/boot/dts/sun8i-h3.dtsi
> > > > > > > > > +++ b/arch/arm/boot/dts/sun8i-h3.dtsi
> > > > > > > > > @@ -72,6 +72,13 @@
> > > > > > > > >                  };
> > > > > > > > >          };
> > > > > > > > >    +     soc {
> > > > > > > > > +               sid: eeprom@1c14000 {
> > > > > > > > > +                       compatible = "allwinner,sun8i-h3-sid";
> > > > > > > > > +                       reg = <0x01c14000 0x400>;
> > > > > > > > > +               };
> > > > > > > > > +       };
> > > > > > > > > +
> > > > > > > > 
> > > > > > > > 
> > > > > > > > Shouldn't you also use a nvmem-cells property to the THS node?
> > > > > > > > 
> > > > > > > > Maxime
> > > > > > > > 
> > > > > > > 
> > > > > > > Oh seems like I forgot that.
> > > > > > > As related to the wiki [1] this should be 64 bit wide at the address
> > > > > > 
> > > > > > 0x34. I
> > > > > > > will add that in the next version.
> > > > > > > 
> > > > > > > 
> > > > > > > [1]: http://linux-sunxi.org/SID_Register_Guide#eFUSE
> > > > > > > 
> > > > > > > Thanks,
> > > > > > > Philipp
> > > > > > > 
> > > > > > 
> > > > > > Hi,
> > > > > > 
> > > > > > Any chance this will see a v3 soon? I'm kind of interested in sid node
> > > > > > for h3. =)
> > > > > 
> > > > > This patch is independent and can be easily sent out
> > > > > by its own.
> > > > > 
> > > > 
> > > > Right- I had considered doing so, but wanted to make sure I wasn't
> > > > going to collide with this series if a v3 is imminent.
> > > > 
> > > 
> > > 
> > 
> > -- 
> > Developer of free digital technology and hardware support.
> > 
> > Website: https://www.paulk.fr/
> > Coding blog: https://code.paulk.fr/
> > Git repositories: https://git.paulk.fr/ https://git.code.paulk.fr/
> 
> 
-- 
Developer of free digital technology and hardware support.

Website: https://www.paulk.fr/
Coding blog: https://code.paulk.fr/
Git repositories: https://git.paulk.fr/ https://git.code.paulk.fr/