From: Russell King <rmk+kernel-I+IVW8TIWO2tmTQ+vhA3Yw@public.gmane.org>
To: Fabio Estevam <fabio.estevam-3arQi8VN3Tc@public.gmane.org>,
Sascha Hauer <kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>,
Shawn Guo <shawnguo-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>,
Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Subject: [PATCH 20/20] ARM: dts: imx6qdl-hummingboard2: rename regulators to match schematic
Date: Mon, 11 Dec 2017 16:59:00 +0000 [thread overview]
Message-ID: <E1eORPw-0000JD-38@rmk-PC.armlinux.org.uk> (raw)
In-Reply-To: <20171211165631.GW10595-l+eeeJia6m9URfEZ8mYm6t73F7V6hmMc@public.gmane.org>
Make the regulators match the schematic - name the regulators after
one of their schematic supply names, and arrange them into their
heirarchy.
Signed-off-by: Russell King <rmk+kernel-I+IVW8TIWO2tmTQ+vhA3Yw@public.gmane.org>
---
arch/arm/boot/dts/imx6qdl-hummingboard2-emmc.dtsi | 4 +-
arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi | 86 ++++++++++++++---------
2 files changed, 56 insertions(+), 34 deletions(-)
diff --git a/arch/arm/boot/dts/imx6qdl-hummingboard2-emmc.dtsi b/arch/arm/boot/dts/imx6qdl-hummingboard2-emmc.dtsi
index 1aa97817e751..f400405381a7 100644
--- a/arch/arm/boot/dts/imx6qdl-hummingboard2-emmc.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-hummingboard2-emmc.dtsi
@@ -64,8 +64,8 @@
&usdhc3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hummingboard2_usdhc3>;
- vmmc-supply = <®_3p3v>;
- vqmmc-supply = <®_3p3v>;
+ vmmc-supply = <&v_3v2>;
+ vqmmc-supply = <&v_3v2>;
bus-width = <8>;
non-removable;
status = "okay";
diff --git a/arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi b/arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi
index 1089f693ebde..117c4daf31e9 100644
--- a/arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi
@@ -52,20 +52,29 @@
linux,rc-map-name = "rc-rc6-mce";
};
- reg_3p3v: regulator-3p3v {
+ v_3v2: regulator-v-3v2 {
compatible = "regulator-fixed";
- regulator-name = "VCC_3V2";
- regulator-min-microvolt = <3300000>;
+ regulator-always-on;
regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-name = "v_3v2";
+ };
+
+ v_5v0: regulator-v-5v0 {
+ compatible = "regulator-fixed";
regulator-always-on;
+ regulator-max-microvolt = <5000000>;
+ regulator-min-microvolt = <5000000>;
+ regulator-name = "v_5v0";
};
- reg_1p8v: regulator-1p8v {
+ vcc_1p8: regulator-vcc-1p8 {
compatible = "regulator-fixed";
- regulator-name = "VCC_1V8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
regulator-always-on;
+ regulator-max-microvolt = <1800000>;
+ regulator-min-microvolt = <1800000>;
+ regulator-name = "vcc_1p8";
+ vin-supply = <&v_3v2>;
};
v_sd: regulator-v-sd {
@@ -78,53 +87,62 @@
regulator-min-microvolt = <3300000>;
regulator-name = "v_sd";
startup-delay-us = <1000>;
+ vin-supply = <&v_3v2>;
};
- reg_usbh2_vbus: regulator-usb-h1-vbus {
+ v_usb1: regulator-v-usb1 {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_hummingboard2_usbh1_vbus>;
- regulator-name = "V_USB2";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
+ pinctrl-0 = <&pinctrl_hummingboard2_usbotg_vbus>;
regulator-always-on;
+ regulator-max-microvolt = <5000000>;
+ regulator-min-microvolt = <5000000>;
+ regulator-name = "v_usb1";
+ vin-supply = <&v_5v0>;
};
- reg_usbotg_vbus: regulator-usb-otg-vbus {
+ v_usb2: regulator-v-usb2 {
+ /* USB hub port 1 */
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_hummingboard2_usbotg_vbus>;
- regulator-name = "V_USB1";
- regulator-min-microvolt = <5000000>;
+ pinctrl-0 = <&pinctrl_hummingboard2_usbh1_vbus>;
+ regulator-always-on;
regulator-max-microvolt = <5000000>;
+ regulator-min-microvolt = <5000000>;
+ regulator-name = "v_usb2";
+ vin-supply = <&v_5v0>;
};
- reg_usbh3_vbus: regulator-usb-h2-vbus {
+ v_usb3: regulator-v-usb3 {
+ /* USB hub port 3 */
compatible = "regulator-fixed";
enable-active-high;
- enable-gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hummingboard2_usbh2_vbus>;
- regulator-name = "V_USB3";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
regulator-always-on;
+ regulator-max-microvolt = <5000000>;
+ regulator-min-microvolt = <5000000>;
+ regulator-name = "v_usb3";
+ vin-supply = <&v_5v0>;
};
- reg_usbh4_vbus: regulator-usb-h3-vbus {
+ v_usb4: regulator-v-usb4 {
+ /* USB hub port 4 */
compatible = "regulator-fixed";
enable-active-high;
- enable-gpio = <&gpio7 10 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio7 10 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hummingboard2_usbh3_vbus>;
- regulator-name = "V_USB4";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
regulator-always-on;
+ regulator-max-microvolt = <5000000>;
+ regulator-min-microvolt = <5000000>;
+ regulator-name = "v_usb4";
+ vin-supply = <&v_5v0>;
};
sound-sgtl5000 {
@@ -176,9 +194,9 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hummingboard2_sgtl5000>;
reg = <0x0a>;
- VDDA-supply = <®_3p3v>;
- VDDIO-supply = <®_3p3v>;
- VDDD-supply = <®_1p8v>;
+ VDDA-supply = <&v_3v2>;
+ VDDD-supply = <&vcc_1p8>;
+ VDDIO-supply = <&v_3v2>;
};
};
@@ -488,7 +506,7 @@
disable-over-current;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hummingboard2_usbotg_id>;
- vbus-supply = <®_usbotg_vbus>;
+ vbus-supply = <&v_usb1>;
status = "okay";
};
@@ -516,3 +534,7 @@
pinctrl-0 = <&pinctrl_hummingboard2_uart3>;
status = "okay";
};
+
+&vcc_3v3 {
+ vin-supply = <&v_3v2>;
+};
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2017-12-11 16:59 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-11 16:56 [PATCH 00/20] Add Hummingboard 2 support Russell King - ARM Linux
[not found] ` <20171211165631.GW10595-l+eeeJia6m9URfEZ8mYm6t73F7V6hmMc@public.gmane.org>
2017-12-11 16:57 ` [PATCH 01/20] ARM: dts: imx6qdl: add HummingBoard2 boards Russell King
2017-12-11 16:57 ` [PATCH 02/20] ARM: dts: imx6*-hummingboard2: remove ar8035 include Russell King
2017-12-11 16:57 ` [PATCH 03/20] ARM: dts: imx6qdl-hummingboard2: rename microsom include Russell King
2017-12-11 16:57 ` [PATCH 04/20] ARM: dts: imx6*-hummingboard2: move microsom includes into .dts Russell King
2017-12-11 16:57 ` [PATCH 05/20] ARM: dts: imx6*-hummingboard2: add Broadcom Wi-Fi include Russell King
2017-12-11 16:57 ` [PATCH 06/20] ARM: dts: imx6*-hummingboard2: fix SD card detect Russell King
2017-12-11 16:57 ` [PATCH 07/20] ARM: dts: imx6*-hummingboard2: use proper gpio flags definitions Russell King
2017-12-11 16:57 ` [PATCH 08/20] ARM: dts: imx6*-hummingboard2: convert to more conventional vmmc-supply Russell King
2017-12-11 16:58 ` [PATCH 09/20] ARM: dts: imx6*-hummingboard2: fix formatting Russell King
2017-12-11 16:58 ` [PATCH 10/20] ARM: dts: imx6*-hummingboard2: add SGTL5000 VDDD supply Russell King
2017-12-11 16:58 ` [PATCH 11/20] ARM: dts: imx6*-hummingboard2: remove LDB node Russell King
2017-12-11 16:58 ` [PATCH 12/20] ARM: dts: imx6*-hummingboard2: fix PCIe reset polarity Russell King
2017-12-11 16:58 ` [PATCH 13/20] ARM: dts: imx6*-hummingboard2: remove non-mainline property from RTC Russell King
2017-12-11 16:58 ` [PATCH 14/20] ARM: dts: imx6*-hummingboard2: remove redundant PWM disables Russell King
2017-12-11 16:58 ` [PATCH 15/20] ARM: dts: imx6*-hummingboard2: rework regulators Russell King
2017-12-11 16:58 ` [PATCH 16/20] ARM: dts: imx6*-hummingboard2: split out eMMC support Russell King
2017-12-11 16:58 ` [PATCH 17/20] ARM: dts: imx6qdl-hummingboard2: add PWM3 support Russell King
2017-12-11 16:58 ` [PATCH 18/20] ARM: dts: imx6qdl-hummingboard2: add v1.5 som without eMMC Russell King
2017-12-11 16:58 ` [PATCH 19/20] ARM: dts: imx6qdl-hummingboard2: add v1.5 som with eMMC Russell King
2017-12-11 16:59 ` Russell King [this message]
2017-12-16 13:58 ` [PATCH 00/20] Add Hummingboard 2 support Fabio Estevam
2017-12-26 4:05 ` Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=E1eORPw-0000JD-38@rmk-PC.armlinux.org.uk \
--to=rmk+kernel-i+ivw8tiwo2tmtq+vha3yw@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=fabio.estevam-3arQi8VN3Tc@public.gmane.org \
--cc=kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=shawnguo-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).