From: "Johnson CH Chen (陳昭勳)" <JohnsonCH.Chen@moxa.com>
To: "Benoît Cousson" <bcousson@baylibre.com>,
"tony@atomide.com" <tony@atomide.com>,
"Rob Herring" <robh+dt@kernel.org>,
"linux-omap@vger.kernel.org" <linux-omap@vger.kernel.org>,
"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Subject: [PATCH 2/2] ARM: dts: am335x: add support for Moxa UC-8100A-ME open platform
Date: Tue, 7 Jul 2020 10:23:36 +0000 [thread overview]
Message-ID: <HK2PR01MB328129CEA1A9294A8715CE28FA660@HK2PR01MB3281.apcprd01.prod.exchangelabs.com> (raw)
UC-8100A-ME is advanced of UC-8100-ME-T, and UC-8100-ME-T is deprecated.
UC-8100A-ME provides larger RAM and eMMC, better input current than
UC-8100-ME-T's, and it supports selectable LTE module for US/EU/APAC.
UC-8100A-ME computing platform is designed for embedded data acquisition
industrial applications. Features of UC-8100A-ME series are:
* eMMC
* SPI flash
* SD slot
* 2x LAN
* 2 RS-232/422/485 ports, software-selectable
* Mini PCIe form factor with USB signal
* USB host
* EEPROM
* TPM
* Watchdog
* RTC
* User gpio-keys
* User LEDs
* User button
Signed-off-by: Johnson Chen <johnsonch.chen@moxa.com>
Signed-off-by: Wes Huang <wes.huang@moxa.com>
Signed-off-by: Fero JD Zhou <FeroJD.Zhou@moxa.com>
---
arch/arm/boot/dts/Makefile | 2 +-
...c-8100-me-t.dts => am335x-moxa-uc-8100a-me.dts} | 56 ++++++++++------------
2 files changed, 27 insertions(+), 31 deletions(-)
rename arch/arm/boot/dts/{am335x-moxa-uc-8100-me-t.dts => am335x-moxa-uc-8100a-me.dts} (93%)
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index e6a1cac0bfc7..f6ec58f1dd7e 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -793,7 +793,7 @@ dtb-$(CONFIG_SOC_AM33XX) += \
am335x-icev2.dtb \
am335x-lxm.dtb \
am335x-moxa-uc-2101.dtb \
- am335x-moxa-uc-8100-me-t.dtb \
+ am335x-moxa-uc-8100a-me.dtb \
am335x-nano.dtb \
am335x-netcan-plus-1xx.dtb \
am335x-netcom-plus-2xx.dtb \
diff --git a/arch/arm/boot/dts/am335x-moxa-uc-8100-me-t.dts b/arch/arm/boot/dts/am335x-moxa-uc-8100a-me.dts
similarity index 93%
rename from arch/arm/boot/dts/am335x-moxa-uc-8100-me-t.dts
rename to arch/arm/boot/dts/am335x-moxa-uc-8100a-me.dts
index f03e72cada41..536bbfeaa6e1 100644
--- a/arch/arm/boot/dts/am335x-moxa-uc-8100-me-t.dts
+++ b/arch/arm/boot/dts/am335x-moxa-uc-8100a-me.dts
@@ -1,8 +1,6 @@
-// SPDX-License-Identifier: GPL-2.0-only
+// SPDX-License-Identifier: GPL-2.0
/*
- * Copyright (C) 2017 MOXA Inc. - https://www.moxa.com/
- *
- * Author: SZ Lin (林上智) <sz.lin@moxa.com>
+ * Copyright (C) 2020 MOXA Inc. - https://www.moxa.com/
*/
/dts-v1/;
@@ -10,8 +8,8 @@
#include "am33xx.dtsi"
/ {
- model = "Moxa UC-8100-ME-T";
- compatible = "moxa,uc-8100-me-t", "ti,am33xx";
+ model = "Moxa UC-8100A-ME";
+ compatible = "moxa,uc-8100a-me", "ti,am33xx";
cpus {
cpu@0 {
@@ -19,11 +17,6 @@
};
};
- memory {
- device_type = "memory";
- reg = <0x80000000 0x20000000>; /* 512 MB */
- };
-
vbat: vbat-regulator {
compatible = "regulator-fixed";
};
@@ -40,51 +33,51 @@
leds {
compatible = "gpio-leds";
led1 {
- label = "uc8100me:CEL1";
+ label = "UC-8100A-ME:RED:SGN1";
gpios = <&gpio_xten 8 0>;
default-state = "off";
};
led2 {
- label = "uc8100me:CEL2";
+ label = "UC-8100A-ME:YELLOW:SGN2";
gpios = <&gpio_xten 9 0>;
default-state = "off";
};
led3 {
- label = "uc8100me:CEL3";
+ label = "UC-8100A-ME:GREEN:SGN3";
gpios = <&gpio_xten 10 0>;
default-state = "off";
};
led4 {
- label = "uc8100me:DIA1";
+ label = "UC-8100A-ME:RED:DIA1";
gpios = <&gpio_xten 11 0>;
default-state = "off";
};
led5 {
- label = "uc8100me:DIA2";
+ label = "UC-8100A-ME:YELLOW:DIA2";
gpios = <&gpio_xten 12 0>;
default-state = "off";
};
led6 {
- label = "uc8100me:DIA3";
+ label = "UC-8100A-ME:GREEN:DIA3";
gpios = <&gpio_xten 13 0>;
default-state = "off";
};
led7 {
- label = "uc8100me:SD";
+ label = "UC-8100A-ME:GREEN:SD";
gpios = <&gpio_xten 14 0>;
default-state = "off";
};
led8 {
- label = "uc8100me:USB";
+ label = "UC-8100A-ME:GREEN:USB";
gpios = <&gpio_xten 15 0>;
default-state = "off";
};
led9 {
- label = "uc8100me:USER";
- gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
+ label = "UC-8100A-ME:GREEN:USER";
+ gpios = <&gpio0 20 0>;
default-state = "off";
};
};
@@ -219,6 +212,7 @@
pinctrl-single,pins = <
AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT_PULLUP, MUX_MODE0)
AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT_PULLUP, MUX_MODE0)
AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_INPUT_PULLUP, MUX_MODE0)
AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT_PULLUP, MUX_MODE0)
>;
@@ -254,11 +248,6 @@
status = "okay";
clock-frequency = <400000>;
- tpm: tpm@20 {
- compatible = "infineon,slb9645tt";
- reg = <0x20>;
- };
-
tps: tps@2d {
compatible = "ti,tps65910";
reg = <0x2d>;
@@ -322,8 +311,8 @@
vdd1_reg: regulator@2 {
/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
regulator-name = "vdd_mpu";
- regulator-min-microvolt = <912500>;
- regulator-max-microvolt = <1378000>;
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <1500000>;
regulator-boot-on;
regulator-always-on;
};
@@ -331,8 +320,8 @@
vdd2_reg: regulator@3 {
/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
regulator-name = "vdd_core";
- regulator-min-microvolt = <912500>;
- regulator-max-microvolt = <1150000>;
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <1500000>;
regulator-boot-on;
regulator-always-on;
};
@@ -481,6 +470,7 @@
reg = <0>;
spi-cpol;
spi-cpha;
+
#address-cells = <1>;
#size-cells = <1>;
@@ -500,4 +490,10 @@
reg = <0x180000 0x20000>;
};
};
+
+ tpm_spi_tis@1{
+ compatible = "tcg,tpm_tis-spi";
+ reg = <1>;
+ spi-max-frequency = <500000>;
+ };
};
--
2.11.0
next reply other threads:[~2020-07-07 10:23 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-07 10:23 Johnson CH Chen (陳昭勳) [this message]
2020-07-07 17:56 ` [PATCH 2/2] ARM: dts: am335x: add support for Moxa UC-8100A-ME open platform Tony Lindgren
2020-07-08 9:45 ` Johnson CH Chen (陳昭勳)
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=HK2PR01MB328129CEA1A9294A8715CE28FA660@HK2PR01MB3281.apcprd01.prod.exchangelabs.com \
--to=johnsonch.chen@moxa.com \
--cc=bcousson@baylibre.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).