From: Guenter Roeck <linux@roeck-us.net>
To: Beniamin Bia <beniamin.bia@analog.com>, linux-hwmon@vger.kernel.org
Cc: Michael.Hennerich@analog.com, linux-kernel@vger.kernel.org,
jdelvare@suse.com, mark.rutland@arm.com, lgirdwood@gmail.com,
broonie@kernel.org, devicetree@vger.kernel.org,
biabeniamin@outlook.com
Subject: Re: [PATCH 2/3] dt-binding: iio: Add documentation for ADM1177
Date: Tue, 3 Dec 2019 07:06:54 -0800 [thread overview]
Message-ID: <b7402a4f-1918-1922-a779-c9914be27f1b@roeck-us.net> (raw)
In-Reply-To: <20191203135711.13972-2-beniamin.bia@analog.com>
On 12/3/19 5:57 AM, Beniamin Bia wrote:
> Documentation for ADM1177 was added.
>
Subject still points to iio.
> Signed-off-by: Beniamin Bia <beniamin.bia@analog.com>
> ---
> .../bindings/hwmon/adi,adm1177.yaml | 65 +++++++++++++++++++
> 1 file changed, 65 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/hwmon/adi,adm1177.yaml
>
> diff --git a/Documentation/devicetree/bindings/hwmon/adi,adm1177.yaml b/Documentation/devicetree/bindings/hwmon/adi,adm1177.yaml
> new file mode 100644
> index 000000000000..abd9354217ba
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/hwmon/adi,adm1177.yaml
> @@ -0,0 +1,65 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/hwmon/adi,adm1177.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Analog Devices ADM1177 Hot Swap Controller and Digital Power Monitor
> +
> +maintainers:
> + - Michael Hennerich <michael.hennerich@analog.com>
> + - Beniamin Bia <beniamin.bia@analog.com>
> +
> +description: |
> + Analog Devices ADM1177 Hot Swap Controller and Digital Power Monitor
> + https://www.analog.com/media/en/technical-documentation/data-sheets/ADM1177.pdf
> +
> +properties:
> + compatible:
> + enum:
> + - adi,adm1177
> +
> + reg:
> + maxItems: 1
> +
> + avcc-supply:
> + description:
> + Phandle to the Avcc power supply
> +
> + adi,r-sense-micro-ohms:
> + description:
> + The value of curent sense resistor in microohms.
There is a standard property for that (shunt-resistor-micro-ohms).
> +
> + adi,shutdown-threshold-microamp:
> + description:
> + Specifies the current level at which an over current alert occurs.
> +
> + adi,vrange-high-enable:
> + description:
> + Specifies which internal voltage divider to be used. A 1 selects
> + a 7:2 voltage divider while a 0 selects a 14:1 voltage divider.
> + type: boolean
> +
> +required:
> + - compatible
> + - reg
> + - adi,r-sense-micro-ohms
> + - adi,shutdown-threshold-microamp
> +
> +examples:
> + - |
> + #include <dt-bindings/gpio/gpio.h>
> + #include <dt-bindings/interrupt-controller/irq.h>
> + i2c0 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + pwmon@5a {
> + compatible = "adi,adm1177";
> + reg = <0x5a>;
> + adi,r-sense-micro-ohms = <50000>; /* 50 mOhm */
> + adi,shutdown-threshold-microamp = <1059000>; /* 1.059 A */
> + adi,vrange-high-enable;
> + };
> + };
> +...
>
next prev parent reply other threads:[~2019-12-03 15:07 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-03 13:57 [PATCH 1/3] hwmon: adm1177: Add ADM1177 Hot Swap Controller and Digital Power Monitor driver Beniamin Bia
2019-12-03 13:57 ` [PATCH 2/3] dt-binding: iio: Add documentation for ADM1177 Beniamin Bia
2019-12-03 15:06 ` Guenter Roeck [this message]
2019-12-03 13:57 ` [PATCH 3/3] MAINTAINERS: add entry for ADM1177 driver Beniamin Bia
2019-12-03 19:28 ` [PATCH 1/3] hwmon: adm1177: Add ADM1177 Hot Swap Controller and Digital Power Monitor driver Guenter Roeck
-- strict thread matches above, loose matches on Subject: below --
2019-11-12 15:35 [PATCH 1/3] iio: " Beniamin Bia
2019-11-12 15:35 ` [PATCH 2/3] dt-binding: iio: Add documentation for ADM1177 Beniamin Bia
2019-11-18 17:49 ` Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=b7402a4f-1918-1922-a779-c9914be27f1b@roeck-us.net \
--to=linux@roeck-us.net \
--cc=Michael.Hennerich@analog.com \
--cc=beniamin.bia@analog.com \
--cc=biabeniamin@outlook.com \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=jdelvare@suse.com \
--cc=lgirdwood@gmail.com \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).