From: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
To: Linux Doc Mailing List <linux-doc@vger.kernel.org>
Cc: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>,
linux-kernel@vger.kernel.org, Jonathan Corbet <corbet@lwn.net>,
GOTO Masanori <gotom@debian.or.jp>,
YOKOTA Hiroshi <yokota@netlab.is.tsukuba.ac.jp>,
"James E.J. Bottomley" <jejb@linux.ibm.com>,
"Martin K. Petersen" <martin.petersen@oracle.com>,
linux-scsi@vger.kernel.org
Subject: [PATCH 24/42] docs: scsi: convert NinjaSCSI.txt to ReST
Date: Mon, 2 Mar 2020 09:15:57 +0100 [thread overview]
Message-ID: <6385a411d000dad005b78647629e43700580ecf0.1583136624.git.mchehab+huawei@kernel.org> (raw)
In-Reply-To: <cover.1583136624.git.mchehab+huawei@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
.../scsi/{NinjaSCSI.txt => NinjaSCSI.rst} | 198 +++++++++++-------
Documentation/scsi/index.rst | 1 +
MAINTAINERS | 4 +-
drivers/scsi/pcmcia/Kconfig | 2 +-
4 files changed, 121 insertions(+), 84 deletions(-)
rename Documentation/scsi/{NinjaSCSI.txt => NinjaSCSI.rst} (28%)
diff --git a/Documentation/scsi/NinjaSCSI.txt b/Documentation/scsi/NinjaSCSI.rst
similarity index 28%
rename from Documentation/scsi/NinjaSCSI.txt
rename to Documentation/scsi/NinjaSCSI.rst
index ac8db8ceec77..999a6ed5bf7e 100644
--- a/Documentation/scsi/NinjaSCSI.txt
+++ b/Documentation/scsi/NinjaSCSI.rst
@@ -1,127 +1,163 @@
+.. SPDX-License-Identifier: GPL-2.0
- WorkBiT NinjaSCSI-3/32Bi driver for Linux
+=========================================
+WorkBiT NinjaSCSI-3/32Bi driver for Linux
+=========================================
1. Comment
- This is Workbit corp.'s(http://www.workbit.co.jp/) NinjaSCSI-3
+==========
+
+This is Workbit corp.'s(http://www.workbit.co.jp/) NinjaSCSI-3
for Linux.
2. My Linux environment
-Linux kernel: 2.4.7 / 2.2.19
-pcmcia-cs: 3.1.27
-gcc: gcc-2.95.4
-PC card: I-O data PCSC-F (NinjaSCSI-3)
- I-O data CBSC-II in 16 bit mode (NinjaSCSI-32Bi)
-SCSI device: I-O data CDPS-PX24 (CD-ROM drive)
- Media Intelligent MMO-640GT (Optical disk drive)
+=======================
+
+:Linux kernel: 2.4.7 / 2.2.19
+:pcmcia-cs: 3.1.27
+:gcc: gcc-2.95.4
+:PC card: I-O data PCSC-F (NinjaSCSI-3),
+ I-O data CBSC-II in 16 bit mode (NinjaSCSI-32Bi)
+:SCSI device: I-O data CDPS-PX24 (CD-ROM drive),
+ Media Intelligent MMO-640GT (Optical disk drive)
3. Install
-[1] Check your PC card is true "NinjaSCSI-3" card.
+==========
+
+(a) Check your PC card is true "NinjaSCSI-3" card.
+
If you installed pcmcia-cs already, pcmcia reports your card as UNKNOWN
card, and write ["WBT", "NinjaSCSI-3", "R1.0"] or some other string to
your console or log file.
+
You can also use "cardctl" program (this program is in pcmcia-cs source
code) to get more info.
-# cat /var/log/messages
-...
-Jan 2 03:45:06 lindberg cardmgr[78]: unsupported card in socket 1
-Jan 2 03:45:06 lindberg cardmgr[78]: product info: "WBT", "NinjaSCSI-3", "R1.0"
-...
-# cardctl ident
-Socket 0:
- no product info available
-Socket 1:
- product info: "IO DATA", "CBSC16 ", "1"
+ ::
+ # cat /var/log/messages
+ ...
+ Jan 2 03:45:06 lindberg cardmgr[78]: unsupported card in socket 1
+ Jan 2 03:45:06 lindberg cardmgr[78]: product info: "WBT", "NinjaSCSI-3", "R1.0"
+ ...
+ # cardctl ident
+ Socket 0:
+ no product info available
+ Socket 1:
+ product info: "IO DATA", "CBSC16 ", "1"
-[2] Get the Linux kernel source, and extract it to /usr/src.
+
+(b) Get the Linux kernel source, and extract it to /usr/src.
Because the NinjaSCSI driver requires some SCSI header files in Linux
kernel source, I recommend rebuilding your kernel; this eliminates
some versioning problems.
-$ cd /usr/src
-$ tar -zxvf linux-x.x.x.tar.gz
-$ cd linux
-$ make config
-...
-[3] If you use this driver with Kernel 2.2, unpack pcmcia-cs in some directory
+ ::
+
+ $ cd /usr/src
+ $ tar -zxvf linux-x.x.x.tar.gz
+ $ cd linux
+ $ make config
+ ...
+
+(c) If you use this driver with Kernel 2.2, unpack pcmcia-cs in some directory
and make & install. This driver requires the pcmcia-cs header file.
-$ cd /usr/src
-$ tar zxvf cs-pcmcia-cs-3.x.x.tar.gz
-...
-[4] Extract this driver's archive somewhere, and edit Makefile, then do make.
-$ tar -zxvf nsp_cs-x.x.tar.gz
-$ cd nsp_cs-x.x
-$ emacs Makefile
-...
-$ make
+ ::
-[5] Copy nsp_cs.ko to suitable place, like /lib/modules/<Kernel version>/pcmcia/ .
+ $ cd /usr/src
+ $ tar zxvf cs-pcmcia-cs-3.x.x.tar.gz
+ ...
+
+(d) Extract this driver's archive somewhere, and edit Makefile, then do make::
+
+ $ tar -zxvf nsp_cs-x.x.tar.gz
+ $ cd nsp_cs-x.x
+ $ emacs Makefile
+ ...
+ $ make
+
+(e) Copy nsp_cs.ko to suitable place, like /lib/modules/<Kernel version>/pcmcia/ .
+
+(f) Add these lines to /etc/pcmcia/config .
-[6] Add these lines to /etc/pcmcia/config .
If you use pcmcia-cs-3.1.8 or later, we can use "nsp_cs.conf" file.
So, you don't need to edit file. Just copy to /etc/pcmcia/ .
--------------------------------------
-device "nsp_cs"
- class "scsi" module "nsp_cs"
-
-card "WorkBit NinjaSCSI-3"
- version "WBT", "NinjaSCSI-3", "R1.0"
- bind "nsp_cs"
-
-card "WorkBit NinjaSCSI-32Bi (16bit)"
- version "WORKBIT", "UltraNinja-16", "1"
- bind "nsp_cs"
-
-# OEM
-card "WorkBit NinjaSCSI-32Bi (16bit) / IO-DATA"
- version "IO DATA", "CBSC16 ", "1"
- bind "nsp_cs"
-
-# OEM
-card "WorkBit NinjaSCSI-32Bi (16bit) / KME-1"
- version "KME ", "SCSI-CARD-001", "1"
- bind "nsp_cs"
-card "WorkBit NinjaSCSI-32Bi (16bit) / KME-2"
- version "KME ", "SCSI-CARD-002", "1"
- bind "nsp_cs"
-card "WorkBit NinjaSCSI-32Bi (16bit) / KME-3"
- version "KME ", "SCSI-CARD-003", "1"
- bind "nsp_cs"
-card "WorkBit NinjaSCSI-32Bi (16bit) / KME-4"
- version "KME ", "SCSI-CARD-004", "1"
- bind "nsp_cs"
--------------------------------------
-
-[7] Start (or restart) pcmcia-cs.
-# /etc/rc.d/rc.pcmcia start (BSD style)
-or
-# /etc/init.d/pcmcia start (SYSV style)
+ ::
+
+ device "nsp_cs"
+ class "scsi" module "nsp_cs"
+
+ card "WorkBit NinjaSCSI-3"
+ version "WBT", "NinjaSCSI-3", "R1.0"
+ bind "nsp_cs"
+
+ card "WorkBit NinjaSCSI-32Bi (16bit)"
+ version "WORKBIT", "UltraNinja-16", "1"
+ bind "nsp_cs"
+
+ # OEM
+ card "WorkBit NinjaSCSI-32Bi (16bit) / IO-DATA"
+ version "IO DATA", "CBSC16 ", "1"
+ bind "nsp_cs"
+
+ # OEM
+ card "WorkBit NinjaSCSI-32Bi (16bit) / KME-1"
+ version "KME ", "SCSI-CARD-001", "1"
+ bind "nsp_cs"
+ card "WorkBit NinjaSCSI-32Bi (16bit) / KME-2"
+ version "KME ", "SCSI-CARD-002", "1"
+ bind "nsp_cs"
+ card "WorkBit NinjaSCSI-32Bi (16bit) / KME-3"
+ version "KME ", "SCSI-CARD-003", "1"
+ bind "nsp_cs"
+ card "WorkBit NinjaSCSI-32Bi (16bit) / KME-4"
+ version "KME ", "SCSI-CARD-004", "1"
+ bind "nsp_cs"
+
+(f) Start (or restart) pcmcia-cs::
+
+ # /etc/rc.d/rc.pcmcia start (BSD style)
+
+ or::
+
+ # /etc/init.d/pcmcia start (SYSV style)
4. History
+==========
+
See README.nin_cs .
5. Caution
- If you eject card when doing some operation for your SCSI device or suspend
+==========
+
+If you eject card when doing some operation for your SCSI device or suspend
your computer, you encount some *BAD* error like disk crash.
- It works good when I using this driver right way. But I'm not guarantee
+
+It works good when I using this driver right way. But I'm not guarantee
your data. Please backup your data when you use this driver.
6. Known Bugs
- In 2.4 kernel, you can't use 640MB Optical disk. This error comes from
+=============
+
+In 2.4 kernel, you can't use 640MB Optical disk. This error comes from
high level SCSI driver.
7. Testing
- Please send me some reports(bug reports etc..) of this software.
+==========
+
+Please send me some reports(bug reports etc..) of this software.
When you send report, please tell me these or more.
- card name
- kernel version
- your SCSI device name(hard drive, CD-ROM, etc...)
+
+ - card name
+ - kernel version
+ - your SCSI device name(hard drive, CD-ROM, etc...)
8. Copyright
+============
+
See GPL.
diff --git a/Documentation/scsi/index.rst b/Documentation/scsi/index.rst
index a2545efbb407..eb2df0e0dcb7 100644
--- a/Documentation/scsi/index.rst
+++ b/Documentation/scsi/index.rst
@@ -28,5 +28,6 @@ Linux SCSI Subsystem
lpfc
megaraid
ncr53c8xx
+ NinjaSCSI
scsi_transport_srp/figures
diff --git a/MAINTAINERS b/MAINTAINERS
index 6d28bfc72259..2f441cf59b4b 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -11861,7 +11861,7 @@ NINJA SCSI-3 / NINJA SCSI-32Bi (16bit/CardBus) PCMCIA SCSI HOST ADAPTER DRIVER
M: YOKOTA Hiroshi <yokota@netlab.is.tsukuba.ac.jp>
W: http://www.netlab.is.tsukuba.ac.jp/~yokota/izumi/ninja/
S: Maintained
-F: Documentation/scsi/NinjaSCSI.txt
+F: Documentation/scsi/NinjaSCSI.rst
F: drivers/scsi/pcmcia/nsp_*
NINJA SCSI-32Bi/UDE PCI/CARDBUS SCSI HOST ADAPTER DRIVER
@@ -11869,7 +11869,7 @@ M: GOTO Masanori <gotom@debian.or.jp>
M: YOKOTA Hiroshi <yokota@netlab.is.tsukuba.ac.jp>
W: http://www.netlab.is.tsukuba.ac.jp/~yokota/izumi/ninja/
S: Maintained
-F: Documentation/scsi/NinjaSCSI.txt
+F: Documentation/scsi/NinjaSCSI.rst
F: drivers/scsi/nsp32*
NIOS2 ARCHITECTURE
diff --git a/drivers/scsi/pcmcia/Kconfig b/drivers/scsi/pcmcia/Kconfig
index dc9b74c9348a..9696b6b5591f 100644
--- a/drivers/scsi/pcmcia/Kconfig
+++ b/drivers/scsi/pcmcia/Kconfig
@@ -36,7 +36,7 @@ config PCMCIA_NINJA_SCSI
help
If you intend to attach this type of PCMCIA SCSI host adapter to
your computer, say Y here and read
- <file:Documentation/scsi/NinjaSCSI.txt>.
+ <file:Documentation/scsi/NinjaSCSI.rst>.
Supported cards:
--
2.21.1
next prev parent reply other threads:[~2020-03-02 8:17 UTC|newest]
Thread overview: 55+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-02 8:15 [PATCH 00/42] Manually convert SCSI documentation to ReST format Mauro Carvalho Chehab
2020-03-02 8:15 ` [PATCH 01/42] Add an empty index file for SCSI documents Mauro Carvalho Chehab
2020-03-02 8:15 ` [PATCH 02/42] docs: scsi: include SCSI Transport SRP diagram at the doc body Mauro Carvalho Chehab
2020-03-02 8:15 ` [PATCH 03/42] docs: scsi: convert 53c700.txt to ReST Mauro Carvalho Chehab
2020-03-02 8:15 ` [PATCH 04/42] docs: scsi: convert aacraid.txt " Mauro Carvalho Chehab
2020-03-02 8:15 ` [PATCH 05/42] docs: scsi: convert advansys.txt " Mauro Carvalho Chehab
2020-03-02 8:15 ` [PATCH 06/42] docs: scsi: convert aha152x.txt " Mauro Carvalho Chehab
2020-03-02 8:15 ` [PATCH 07/42] docs: scsi: convert aic79xx.txt " Mauro Carvalho Chehab
2020-03-17 13:41 ` Christoph Hellwig
2020-03-02 8:15 ` [PATCH 08/42] docs: scsi: convert aic7xxx.txt " Mauro Carvalho Chehab
2020-03-02 8:15 ` [PATCH 09/42] docs: scsi: convert bfa.txt " Mauro Carvalho Chehab
2020-03-02 8:15 ` [PATCH 10/42] docs: scsi: convert bnx2fc.txt " Mauro Carvalho Chehab
2020-03-02 8:15 ` [PATCH 11/42] docs: scsi: convert BusLogic.txt " Mauro Carvalho Chehab
2020-03-04 18:58 ` Khalid Aziz
2020-03-02 8:15 ` [PATCH 12/42] docs: scsi: convert cxgb3i.txt " Mauro Carvalho Chehab
2020-03-02 8:15 ` [PATCH 13/42] docs: scsi: convert dc395x.txt " Mauro Carvalho Chehab
2020-03-02 8:15 ` [PATCH 14/42] docs: scsi: convert dpti.txt " Mauro Carvalho Chehab
2020-03-02 8:15 ` [PATCH 15/42] docs: scsi: convert FlashPoint.txt " Mauro Carvalho Chehab
2020-03-02 8:15 ` [PATCH 16/42] docs: scsi: convert g_NCR5380.txt " Mauro Carvalho Chehab
2020-03-03 0:21 ` Finn Thain
2020-03-02 8:15 ` [PATCH 17/42] docs: scsi: convert hpsa.txt " Mauro Carvalho Chehab
2020-03-02 8:15 ` [PATCH 18/42] docs: scsi: convert hptiop.txt " Mauro Carvalho Chehab
2020-03-02 8:15 ` [PATCH 19/42] docs: scsi: convert libsas.txt " Mauro Carvalho Chehab
2020-03-02 8:15 ` [PATCH 20/42] docs: scsi: convert link_power_management_policy.txt " Mauro Carvalho Chehab
2020-03-02 8:15 ` [PATCH 21/42] docs: scsi: convert lpfc.txt " Mauro Carvalho Chehab
2020-03-02 8:15 ` [PATCH 22/42] docs: scsi: convert megaraid.txt " Mauro Carvalho Chehab
2020-03-02 8:15 ` Mauro Carvalho Chehab [this message]
2020-03-11 13:06 ` [PATCH 24/42] docs: scsi: convert NinjaSCSI.txt " Masanori Goto
2020-03-02 8:15 ` [PATCH 25/42] docs: scsi: convert ppa.txt " Mauro Carvalho Chehab
2020-03-02 8:15 ` [PATCH 26/42] docs: scsi: convert qlogicfas.txt " Mauro Carvalho Chehab
2020-03-02 8:16 ` [PATCH 27/42] docs: scsi: convert scsi-changer.txt " Mauro Carvalho Chehab
2020-03-02 8:16 ` [PATCH 28/42] docs: scsi: convert scsi_eh.txt " Mauro Carvalho Chehab
2020-03-02 8:16 ` [PATCH 29/42] docs: scsi: convert scsi_fc_transport.txt " Mauro Carvalho Chehab
2020-03-02 8:16 ` [PATCH 30/42] docs: scsi: convert scsi-generic.txt " Mauro Carvalho Chehab
2020-03-02 8:16 ` [PATCH 31/42] docs: scsi: convert scsi_mid_low_api.txt " Mauro Carvalho Chehab
2020-03-03 0:20 ` Finn Thain
2020-03-17 13:44 ` Christoph Hellwig
2020-03-02 8:16 ` [PATCH 32/42] docs: scsi: convert scsi-parameters.txt " Mauro Carvalho Chehab
2020-03-02 8:16 ` [PATCH 33/42] docs: scsi: convert scsi.txt " Mauro Carvalho Chehab
2020-03-02 8:16 ` [PATCH 34/42] docs: scsi: convert sd-parameters.txt " Mauro Carvalho Chehab
2020-03-02 8:16 ` [PATCH 35/42] docs: scsi: convert smartpqi.txt " Mauro Carvalho Chehab
2020-03-02 8:16 ` [PATCH 36/42] docs: scsi: convert st.txt " Mauro Carvalho Chehab
2020-03-02 8:16 ` [PATCH 37/42] docs: scsi: convert sym53c500_cs.txt " Mauro Carvalho Chehab
2020-03-02 8:16 ` [PATCH 38/42] docs: scsi: convert sym53c8xx_2.txt " Mauro Carvalho Chehab
2020-03-02 8:16 ` [PATCH 39/42] docs: scsi: convert tcm_qla2xxx.txt " Mauro Carvalho Chehab
2020-03-02 8:16 ` [PATCH 40/42] docs: scsi: convert ufs.txt " Mauro Carvalho Chehab
2020-03-03 7:22 ` Avri Altman
2020-03-02 8:16 ` [PATCH 41/42] docs: scsi: convert wd719x.txt " Mauro Carvalho Chehab
2020-03-02 8:16 ` [PATCH 42/42] docs: scsi: convert arcmsr_spec.txt " Mauro Carvalho Chehab
2020-03-10 17:43 ` [PATCH 00/42] Manually convert SCSI documentation to ReST format Jonathan Corbet
2020-03-10 17:50 ` Martin K. Petersen
2020-03-10 17:58 ` Jonathan Corbet
2020-03-10 23:40 ` Martin K. Petersen
2020-03-11 11:50 ` Mauro Carvalho Chehab
2020-03-12 3:05 ` Martin K. Petersen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=6385a411d000dad005b78647629e43700580ecf0.1583136624.git.mchehab+huawei@kernel.org \
--to=mchehab+huawei@kernel.org \
--cc=corbet@lwn.net \
--cc=gotom@debian.or.jp \
--cc=jejb@linux.ibm.com \
--cc=linux-doc@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
--cc=yokota@netlab.is.tsukuba.ac.jp \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).