From: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
To: matti.vaittinen@fi.rohmeurope.com, mazziesaccount@gmail.com
Cc: Lee Jones <lee.jones@linaro.org>,
Jacek Anaszewski <jacek.anaszewski@gmail.com>,
Pavel Machek <pavel@ucw.cz>, Dan Murphy <dmurphy@ti.com>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>, Jonathan Corbet <corbet@lwn.net>,
Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>,
Linus Walleij <linus.walleij@linaro.org>,
Bartosz Golaszewski <bgolaszewski@baylibre.com>,
Alessandro Zummo <a.zummo@towertech.it>,
Alexandre Belloni <alexandre.belloni@bootlin.com>,
Mauro Carvalho Chehab <mchehab+samsung@kernel.org>,
Jeff Kirsher <jeffrey.t.kirsher@intel.com>,
Wolfram Sang <wsa+renesas@sang-engineering.com>,
Marek Szyprowski <m.szyprowski@samsung.com>,
Heiner Kallweit <hkallweit1@gmail.com>,
Nicholas Mc Guire <hofrat@osadl.org>,
Phil Edworthy <phil.edworthy@renesas.com>,
linux-leds@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-doc@vger.kernel.org,
linux-clk@vger.kernel.org, linux-gpio@vger.kernel.org,
linux-rtc@vger.kernel.org
Subject: [PATCH v5 07/16] clk: bd718x7: Support ROHM BD71828 clk block
Date: Mon, 18 Nov 2019 08:56:51 +0200 [thread overview]
Message-ID: <a26e1996361a3f67474303369565f4ddc2ff77b3.1574059625.git.matti.vaittinen@fi.rohmeurope.com> (raw)
In-Reply-To: <cover.1574059625.git.matti.vaittinen@fi.rohmeurope.com>
BD71828GW is a single-chip power management IC for battery-powered portable
devices. Add support for controlling BD71828 clk using bd718x7 driver.
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
---
No changes from v4
drivers/clk/Kconfig | 6 ++---
drivers/clk/clk-bd718x7.c | 38 +++++++++++++++++++++++---------
include/linux/mfd/rohm-bd70528.h | 6 -----
include/linux/mfd/rohm-bd71828.h | 4 ----
include/linux/mfd/rohm-bd718x7.h | 6 -----
5 files changed, 31 insertions(+), 29 deletions(-)
diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index c44247d0b83e..71c5dfdc78f4 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -293,10 +293,10 @@ config COMMON_CLK_STM32H7
Support for stm32h7 SoC family clocks
config COMMON_CLK_BD718XX
- tristate "Clock driver for ROHM BD718x7 PMIC"
- depends on MFD_ROHM_BD718XX || MFD_ROHM_BD70528
+ tristate "Clock driver for 32K clk gates on ROHM PMICs"
+ depends on MFD_ROHM_BD718XX || MFD_ROHM_BD70528 || MFD_ROHM_BD71828
help
- This driver supports ROHM BD71837, ROHM BD71847 and
+ This driver supports ROHM BD71837, ROHM BD71847, ROHM BD71828 and
ROHM BD70528 PMICs clock gates.
config COMMON_CLK_FIXED_MMIO
diff --git a/drivers/clk/clk-bd718x7.c b/drivers/clk/clk-bd718x7.c
index 1c1764f74d0a..853f484b758a 100644
--- a/drivers/clk/clk-bd718x7.c
+++ b/drivers/clk/clk-bd718x7.c
@@ -7,12 +7,25 @@
#include <linux/err.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
-#include <linux/mfd/rohm-bd718x7.h>
-#include <linux/mfd/rohm-bd70528.h>
+#include <linux/mfd/rohm-generic.h>
#include <linux/clk-provider.h>
#include <linux/clkdev.h>
#include <linux/regmap.h>
+/* clk control registers */
+/* BD70528 */
+#define BD70528_REG_OUT32K 0x2c
+/* BD71828 */
+#define BD71828_REG_OUT32K 0x4B
+/* BD71837 and BD71847 */
+#define BD718XX_REG_OUT32K 0x2E
+
+/*
+ * BD71837, BD71847, BD70528 and BD71828 all use bit [0] to clk output control
+ */
+#define CLK_OUT_EN_MASK BIT(0)
+
+
struct bd718xx_clk {
struct clk_hw hw;
u8 reg;
@@ -21,10 +34,8 @@ struct bd718xx_clk {
struct rohm_regmap_dev *mfd;
};
-static int bd71837_clk_set(struct clk_hw *hw, int status)
+static int bd71837_clk_set(struct bd718xx_clk *c, unsigned int status)
{
- struct bd718xx_clk *c = container_of(hw, struct bd718xx_clk, hw);
-
return regmap_update_bits(c->mfd->regmap, c->reg, c->mask, status);
}
@@ -33,14 +44,16 @@ static void bd71837_clk_disable(struct clk_hw *hw)
int rv;
struct bd718xx_clk *c = container_of(hw, struct bd718xx_clk, hw);
- rv = bd71837_clk_set(hw, 0);
+ rv = bd71837_clk_set(c, 0);
if (rv)
dev_dbg(&c->pdev->dev, "Failed to disable 32K clk (%d)\n", rv);
}
static int bd71837_clk_enable(struct clk_hw *hw)
{
- return bd71837_clk_set(hw, 1);
+ struct bd718xx_clk *c = container_of(hw, struct bd718xx_clk, hw);
+
+ return bd71837_clk_set(c, 0xffffffff);
}
static int bd71837_clk_is_enabled(struct clk_hw *hw)
@@ -92,11 +105,15 @@ static int bd71837_clk_probe(struct platform_device *pdev)
case ROHM_CHIP_TYPE_BD71837:
case ROHM_CHIP_TYPE_BD71847:
c->reg = BD718XX_REG_OUT32K;
- c->mask = BD718XX_OUT32K_EN;
+ c->mask = CLK_OUT_EN_MASK;
+ break;
+ case ROHM_CHIP_TYPE_BD71828:
+ c->reg = BD71828_REG_OUT32K;
+ c->mask = CLK_OUT_EN_MASK;
break;
case ROHM_CHIP_TYPE_BD70528:
- c->reg = BD70528_REG_CLK_OUT;
- c->mask = BD70528_CLK_OUT_EN_MASK;
+ c->reg = BD70528_REG_OUT32K;
+ c->mask = CLK_OUT_EN_MASK;
break;
default:
dev_err(&pdev->dev, "Unknown clk chip\n");
@@ -126,6 +143,7 @@ static const struct platform_device_id bd718x7_clk_id[] = {
{ "bd71837-clk", ROHM_CHIP_TYPE_BD71837 },
{ "bd71847-clk", ROHM_CHIP_TYPE_BD71847 },
{ "bd70528-clk", ROHM_CHIP_TYPE_BD70528 },
+ { "bd71828-clk", ROHM_CHIP_TYPE_BD71828 },
{ },
};
MODULE_DEVICE_TABLE(platform, bd718x7_clk_id);
diff --git a/include/linux/mfd/rohm-bd70528.h b/include/linux/mfd/rohm-bd70528.h
index 1013e60c5b25..2ad2320d0a96 100644
--- a/include/linux/mfd/rohm-bd70528.h
+++ b/include/linux/mfd/rohm-bd70528.h
@@ -89,10 +89,6 @@ struct bd70528_data {
#define BD70528_REG_GPIO3_OUT 0x52
#define BD70528_REG_GPIO4_OUT 0x54
-/* clk control */
-
-#define BD70528_REG_CLK_OUT 0x2c
-
/* RTC */
#define BD70528_REG_RTC_COUNT_H 0x2d
@@ -309,8 +305,6 @@ enum {
#define BD70528_GPIO_IN_STATE_BASE 1
-#define BD70528_CLK_OUT_EN_MASK 0x1
-
/* RTC masks to mask out reserved bits */
#define BD70528_MASK_RTC_SEC 0x7f
diff --git a/include/linux/mfd/rohm-bd71828.h b/include/linux/mfd/rohm-bd71828.h
index eb0557eb5314..d013e03f742d 100644
--- a/include/linux/mfd/rohm-bd71828.h
+++ b/include/linux/mfd/rohm-bd71828.h
@@ -183,9 +183,6 @@ enum {
#define BD71828_REG_CHG_STATE 0x65
#define BD71828_REG_CHG_FULL 0xd2
-/* CLK */
-#define BD71828_REG_OUT32K 0x4B
-
/* LEDs */
#define BD71828_REG_LED_CTRL 0x4A
#define BD71828_MASK_LED_AMBER 0x80
@@ -417,7 +414,6 @@ enum {
#define BD71828_INT_RTC1_MASK 0x2
#define BD71828_INT_RTC2_MASK 0x4
-#define BD71828_OUT32K_EN 0x1
#define BD71828_OUT_TYPE_MASK 0x2
#define BD71828_OUT_TYPE_OPEN_DRAIN 0x0
#define BD71828_OUT_TYPE_CMOS 0x2
diff --git a/include/linux/mfd/rohm-bd718x7.h b/include/linux/mfd/rohm-bd718x7.h
index 7f2dbde402a1..bee2474a8f9f 100644
--- a/include/linux/mfd/rohm-bd718x7.h
+++ b/include/linux/mfd/rohm-bd718x7.h
@@ -191,12 +191,6 @@ enum {
#define IRQ_ON_REQ 0x02
#define IRQ_STBY_REQ 0x01
-/* BD718XX_REG_OUT32K bits */
-#define BD718XX_OUT32K_EN 0x01
-
-/* BD7183XX gated clock rate */
-#define BD718XX_CLK_RATE 32768
-
/* ROHM BD718XX irqs */
enum {
BD718XX_INT_STBY_REQ,
--
2.21.0
--
Matti Vaittinen, Linux device drivers
ROHM Semiconductors, Finland SWDC
Kiviharjunlenkki 1E
90220 OULU
FINLAND
~~~ "I don't think so," said Rene Descartes. Just then he vanished ~~~
Simon says - in Latin please.
~~~ "non cogito me" dixit Rene Descarte, deinde evanescavit ~~~
Thanks to Simon Glass for the translation =]
next prev parent reply other threads:[~2019-11-18 6:57 UTC|newest]
Thread overview: 51+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-11-18 6:53 [PATCH v5 00/16] Support ROHM BD71828 PMIC Matti Vaittinen
2019-11-18 6:53 ` [PATCH v5 01/16] dt-bindings: regulator: Document ROHM BD71282 regulator bindings Matti Vaittinen
2019-11-18 16:25 ` Mark Brown
2019-11-18 18:03 ` Vaittinen, Matti
2019-11-19 18:13 ` Mark Brown
2019-11-19 18:51 ` Vaittinen, Matti
2019-11-19 19:36 ` Mark Brown
2019-11-29 7:48 ` Vaittinen, Matti
2019-11-29 12:09 ` Mark Brown
2019-12-02 7:57 ` Vaittinen, Matti
2019-12-02 13:11 ` Mark Brown
2019-12-02 14:02 ` Vaittinen, Matti
2019-12-04 12:47 ` Mark Brown
2019-12-04 13:13 ` Vaittinen, Matti
2019-12-04 14:14 ` Mark Brown
2019-12-10 10:39 ` Vaittinen, Matti
2019-12-10 11:14 ` Vaittinen, Matti
2019-12-10 12:11 ` Mark Brown
2019-12-10 12:41 ` Vaittinen, Matti
2019-12-10 12:45 ` Mark Brown
2019-12-10 13:07 ` Vaittinen, Matti
2019-11-22 22:48 ` Rob Herring
2019-11-18 6:54 ` [PATCH v5 02/16] dt-bindings: leds: ROHM BD71282 PMIC LED driver Matti Vaittinen
2019-11-22 23:00 ` Rob Herring
2019-11-18 6:54 ` [PATCH v5 03/16] dt-bindings: mfd: Document ROHM BD71828 bindings Matti Vaittinen
2019-11-22 23:05 ` Rob Herring
2019-11-18 6:55 ` [PATCH v5 04/16] mfd: rohm PMICs - use platform_device_id to match MFD sub-devices Matti Vaittinen
2019-11-18 6:55 ` [PATCH v5 05/16] mfd: bd71828: Support ROHM BD71828 PMIC - core Matti Vaittinen
2019-11-18 6:56 ` [PATCH v5 06/16] mfd: input: bd71828: Add power-key support Matti Vaittinen
2019-11-18 6:56 ` Matti Vaittinen [this message]
2019-11-18 6:57 ` [PATCH v5 08/16] regulator: bd718x7: Split driver to common and bd718x7 specific parts Matti Vaittinen
2019-11-18 6:57 ` [PATCH v5 09/16] regulator: bd71828: Basic support for ROHM bd71828 PMIC regulators Matti Vaittinen
2019-11-18 16:20 ` Mark Brown
2019-11-19 9:12 ` Vaittinen, Matti
2019-11-18 6:58 ` [PATCH v5 10/16] gpio: devres: Add devm_gpiod_get_parent_array Matti Vaittinen
2019-11-19 14:43 ` Linus Walleij
2019-11-19 17:54 ` Vaittinen, Matti
2019-11-21 14:13 ` Linus Walleij
2019-11-18 6:59 ` [PATCH v5 11/16] docs: driver-model: Add missing managed GPIO array get functions Matti Vaittinen
2019-11-18 6:59 ` [PATCH v5 12/16] regulator: bd71828: Add GPIO based run-level control for regulators Matti Vaittinen
2019-11-18 7:00 ` [PATCH v5 13/16] rtc: bd70528 add BD71828 support Matti Vaittinen
2019-12-10 13:24 ` Alexandre Belloni
2019-11-18 7:01 ` [PATCH v5 14/16] gpio: bd71828: Initial support for ROHM BD71828 PMIC GPIOs Matti Vaittinen
2019-11-18 9:22 ` Bartosz Golaszewski
2019-11-18 7:03 ` [PATCH v5 15/16] leds: Add common LED binding parsing support to LED class/core Matti Vaittinen
2019-11-18 21:55 ` Jacek Anaszewski
2019-11-19 7:21 ` Vaittinen, Matti
2019-11-19 19:30 ` Jacek Anaszewski
2019-11-20 7:31 ` Vaittinen, Matti
2019-11-19 14:23 ` Vaittinen, Matti
2019-11-18 7:03 ` [PATCH v5 16/16] led: bd71828: Support LED outputs on ROHM BD71828 PMIC Matti Vaittinen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=a26e1996361a3f67474303369565f4ddc2ff77b3.1574059625.git.matti.vaittinen@fi.rohmeurope.com \
--to=matti.vaittinen@fi.rohmeurope.com \
--cc=a.zummo@towertech.it \
--cc=alexandre.belloni@bootlin.com \
--cc=bgolaszewski@baylibre.com \
--cc=broonie@kernel.org \
--cc=corbet@lwn.net \
--cc=devicetree@vger.kernel.org \
--cc=dmurphy@ti.com \
--cc=hkallweit1@gmail.com \
--cc=hofrat@osadl.org \
--cc=jacek.anaszewski@gmail.com \
--cc=jeffrey.t.kirsher@intel.com \
--cc=lee.jones@linaro.org \
--cc=lgirdwood@gmail.com \
--cc=linus.walleij@linaro.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-leds@vger.kernel.org \
--cc=linux-rtc@vger.kernel.org \
--cc=m.szyprowski@samsung.com \
--cc=mark.rutland@arm.com \
--cc=mazziesaccount@gmail.com \
--cc=mchehab+samsung@kernel.org \
--cc=mturquette@baylibre.com \
--cc=pavel@ucw.cz \
--cc=phil.edworthy@renesas.com \
--cc=robh+dt@kernel.org \
--cc=sboyd@kernel.org \
--cc=wsa+renesas@sang-engineering.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).