[RFC PATCH 11/11] dt-bindings: Remove Calxeda platforms bindings

[Rob Herring <robh@kernel.org>]

Cc: devicetree@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
---
 .../devicetree/bindings/arm/calxeda.yaml      | 22 ----------
 .../devicetree/bindings/arm/calxeda/l2ecc.txt | 15 -------
 .../devicetree/bindings/ata/sata_highbank.txt | 44 -------------------
 .../devicetree/bindings/clock/calxeda.txt     | 17 -------
 .../memory-controllers/calxeda-ddr-ctrlr.txt  | 16 -------
 .../devicetree/bindings/net/calxeda-xgmac.txt | 18 --------
 .../bindings/phy/calxeda-combophy.txt         | 17 -------
 7 files changed, 149 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/arm/calxeda.yaml
 delete mode 100644 Documentation/devicetree/bindings/arm/calxeda/l2ecc.txt
 delete mode 100644 Documentation/devicetree/bindings/ata/sata_highbank.txt
 delete mode 100644 Documentation/devicetree/bindings/clock/calxeda.txt
 delete mode 100644 Documentation/devicetree/bindings/memory-controllers/calxeda-ddr-ctrlr.txt
 delete mode 100644 Documentation/devicetree/bindings/net/calxeda-xgmac.txt
 delete mode 100644 Documentation/devicetree/bindings/phy/calxeda-combophy.txt

diff --git a/Documentation/devicetree/bindings/arm/calxeda.yaml b/Documentation/devicetree/bindings/arm/calxeda.yaml
deleted file mode 100644
index aa5571d23c39..000000000000
--- a/Documentation/devicetree/bindings/arm/calxeda.yaml
+++ /dev/null
@@ -1,22 +0,0 @@
-# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/arm/calxeda.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Calxeda Platforms Device Tree Bindings
-
-maintainers:
-  - Rob Herring <robh@kernel.org>
-description: |+
-  Bindings for boards with Calxeda Cortex-A9 based ECX-1000 (Highbank) SOC
-  or Cortex-A15 based ECX-2000 SOCs
-
-properties:
-  $nodename:
-    const: '/'
-  compatible:
-    items:
-      - enum:
-          - calxeda,highbank
-          - calxeda,ecx-2000
diff --git a/Documentation/devicetree/bindings/arm/calxeda/l2ecc.txt b/Documentation/devicetree/bindings/arm/calxeda/l2ecc.txt
deleted file mode 100644
index 94e642a33db0..000000000000
--- a/Documentation/devicetree/bindings/arm/calxeda/l2ecc.txt
+++ /dev/null
@@ -1,15 +0,0 @@
-Calxeda Highbank L2 cache ECC
-
-Properties:
-- compatible : Should be "calxeda,hb-sregs-l2-ecc"
-- reg : Address and size for ECC error interrupt clear registers.
-- interrupts : Should be single bit error interrupt, then double bit error
-	interrupt.
-
-Example:
-
-	sregs@fff3c200 {
-		compatible = "calxeda,hb-sregs-l2-ecc";
-		reg = <0xfff3c200 0x100>;
-		interrupts = <0 71 4  0 72 4>;
-	};
diff --git a/Documentation/devicetree/bindings/ata/sata_highbank.txt b/Documentation/devicetree/bindings/ata/sata_highbank.txt
deleted file mode 100644
index aa83407cb7a4..000000000000
--- a/Documentation/devicetree/bindings/ata/sata_highbank.txt
+++ /dev/null
@@ -1,44 +0,0 @@
-* Calxeda AHCI SATA Controller
-
-SATA nodes are defined to describe on-chip Serial ATA controllers.
-The Calxeda SATA controller mostly conforms to the AHCI interface
-with some special extensions to add functionality.
-Each SATA controller should have its own node.
-
-Required properties:
-- compatible        : compatible list, contains "calxeda,hb-ahci"
-- interrupts        : <interrupt mapping for SATA IRQ>
-- reg               : <registers mapping>
-
-Optional properties:
-- dma-coherent      : Present if dma operations are coherent
-- calxeda,port-phys : phandle-combophy and lane assignment, which maps each
-			SATA port to a combophy and a lane within that
-			combophy
-- calxeda,sgpio-gpio: phandle-gpio bank, bit offset, and default on or off,
-			which indicates that the driver supports SGPIO
-			indicator lights using the indicated GPIOs
-- calxeda,led-order : a u32 array that map port numbers to offsets within the
-			SGPIO bitstream.
-- calxeda,tx-atten  : a u32 array that contains TX attenuation override
-			codes, one per port. The upper 3 bytes are always
-			0 and thus ignored.
-- calxeda,pre-clocks : a u32 that indicates the number of additional clock
-			cycles to transmit before sending an SGPIO pattern
-- calxeda,post-clocks: a u32 that indicates the number of additional clock
-			cycles to transmit after sending an SGPIO pattern
-
-Example:
-        sata@ffe08000 {
-		compatible = "calxeda,hb-ahci";
-		reg = <0xffe08000 0x1000>;
-		interrupts = <115>;
-		dma-coherent;
-		calxeda,port-phys = <&combophy5 0 &combophy0 0 &combophy0 1
-					&combophy0 2 &combophy0 3>;
-		calxeda,sgpio-gpio =<&gpioh 5 1 &gpioh 6 1 &gpioh 7 1>;
-		calxeda,led-order = <4 0 1 2 3>;
-		calxeda,tx-atten = <0xff 22 0xff 0xff 23>;
-		calxeda,pre-clocks = <10>;
-		calxeda,post-clocks = <0>;
-        };
diff --git a/Documentation/devicetree/bindings/clock/calxeda.txt b/Documentation/devicetree/bindings/clock/calxeda.txt
deleted file mode 100644
index 0a6ac1bdcda1..000000000000
--- a/Documentation/devicetree/bindings/clock/calxeda.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-Device Tree Clock bindings for Calxeda highbank platform
-
-This binding uses the common clock binding[1].
-
-[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-Required properties:
-- compatible : shall be one of the following:
-	"calxeda,hb-pll-clock" - for a PLL clock
-	"calxeda,hb-a9periph-clock" - The A9 peripheral clock divided from the
-		A9 clock.
-	"calxeda,hb-a9bus-clock" - The A9 bus clock divided from the A9 clock.
-	"calxeda,hb-emmc-clock" - Divided clock for MMC/SD controller.
-- reg : shall be the control register offset from SYSREGs base for the clock.
-- clocks : shall be the input parent clock phandle for the clock. This is
-	either an oscillator or a pll output.
-- #clock-cells : from common clock binding; shall be set to 0.
diff --git a/Documentation/devicetree/bindings/memory-controllers/calxeda-ddr-ctrlr.txt b/Documentation/devicetree/bindings/memory-controllers/calxeda-ddr-ctrlr.txt
deleted file mode 100644
index 049675944b78..000000000000
--- a/Documentation/devicetree/bindings/memory-controllers/calxeda-ddr-ctrlr.txt
+++ /dev/null
@@ -1,16 +0,0 @@
-Calxeda DDR memory controller
-
-Properties:
-- compatible : Should be:
-  - "calxeda,hb-ddr-ctrl" for ECX-1000
-  - "calxeda,ecx-2000-ddr-ctrl" for ECX-2000
-- reg : Address and size for DDR controller registers.
-- interrupts : Interrupt for DDR controller.
-
-Example:
-
-	memory-controller@fff00000 {
-		compatible = "calxeda,hb-ddr-ctrl";
-		reg = <0xfff00000 0x1000>;
-		interrupts = <0 91 4>;
-	};
diff --git a/Documentation/devicetree/bindings/net/calxeda-xgmac.txt b/Documentation/devicetree/bindings/net/calxeda-xgmac.txt
deleted file mode 100644
index c8ae996bd8f2..000000000000
--- a/Documentation/devicetree/bindings/net/calxeda-xgmac.txt
+++ /dev/null
@@ -1,18 +0,0 @@
-* Calxeda Highbank 10Gb XGMAC Ethernet
-
-Required properties:
-- compatible : Should be "calxeda,hb-xgmac"
-- reg : Address and length of the register set for the device
-- interrupts : Should contain 3 xgmac interrupts. The 1st is main interrupt.
-  The 2nd is pwr mgt interrupt. The 3rd is low power state interrupt.
-
-Optional properties:
-- dma-coherent      : Present if dma operations are coherent
-
-Example:
-
-ethernet@fff50000 {
-        compatible = "calxeda,hb-xgmac";
-        reg = <0xfff50000 0x1000>;
-        interrupts = <0 77 4  0 78 4  0 79 4>;
-};
diff --git a/Documentation/devicetree/bindings/phy/calxeda-combophy.txt b/Documentation/devicetree/bindings/phy/calxeda-combophy.txt
deleted file mode 100644
index 6622bdb2e8bc..000000000000
--- a/Documentation/devicetree/bindings/phy/calxeda-combophy.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-Calxeda Highbank Combination Phys for SATA
-
-Properties:
-- compatible : Should be "calxeda,hb-combophy"
-- #phy-cells: Should be 1.
-- reg : Address and size for Combination Phy registers.
-- phydev: device ID for programming the combophy.
-
-Example:
-
-	combophy5: combo-phy@fff5d000 {
-		compatible = "calxeda,hb-combophy";
-		#phy-cells = <1>;
-		reg = <0xfff5d000 0x1000>;
-		phydev = <31>;
-	};
-
-- 
2.20.1