From: Yazen Ghannam <yazen.ghannam@amd.com>
To: linux-edac@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, bp@alien8.de, mchehab@kernel.org,
tony.luck@intel.com, Smita.KoralahalliChannabasappa@amd.com,
Yazen Ghannam <yazen.ghannam@amd.com>,
x86@kernel.org
Subject: [PATCH v2 01/31] x86/MCE/AMD, EDAC/amd64: Move address translation to AMD64 EDAC
Date: Wed, 23 Jun 2021 19:19:32 +0000 [thread overview]
Message-ID: <20210623192002.3671647-2-yazen.ghannam@amd.com> (raw)
In-Reply-To: <20210623192002.3671647-1-yazen.ghannam@amd.com>
The address translation code used for current AMD systems is
non-architectural. So move it to EDAC.
Cc: <x86@kernel.org>
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
---
Link:
https://lkml.kernel.org/r/YKJoICQzD/o7ZPBp@zn.tnic
v1->v2:
* New in v2.
arch/x86/include/asm/mce.h | 3 -
arch/x86/kernel/cpu/mce/amd.c | 200 ----------------------------------
drivers/edac/amd64_edac.c | 199 +++++++++++++++++++++++++++++++++
3 files changed, 199 insertions(+), 203 deletions(-)
diff --git a/arch/x86/include/asm/mce.h b/arch/x86/include/asm/mce.h
index 2ac265e832de..a547ab5b0532 100644
--- a/arch/x86/include/asm/mce.h
+++ b/arch/x86/include/asm/mce.h
@@ -357,7 +357,6 @@ extern int mce_threshold_create_device(unsigned int cpu);
extern int mce_threshold_remove_device(unsigned int cpu);
void mce_amd_feature_init(struct cpuinfo_x86 *c);
-int umc_normaddr_to_sysaddr(u64 norm_addr, u16 nid, u8 umc, u64 *sys_addr);
#else
@@ -365,8 +364,6 @@ static inline int mce_threshold_create_device(unsigned int cpu) { return 0; };
static inline int mce_threshold_remove_device(unsigned int cpu) { return 0; };
static inline bool amd_mce_is_memory_error(struct mce *m) { return false; };
static inline void mce_amd_feature_init(struct cpuinfo_x86 *c) { }
-static inline int
-umc_normaddr_to_sysaddr(u64 norm_addr, u16 nid, u8 umc, u64 *sys_addr) { return -EINVAL; };
#endif
static inline void mce_hygon_feature_init(struct cpuinfo_x86 *c) { return mce_amd_feature_init(c); }
diff --git a/arch/x86/kernel/cpu/mce/amd.c b/arch/x86/kernel/cpu/mce/amd.c
index 1a2a90bd29e7..ce881f32ca41 100644
--- a/arch/x86/kernel/cpu/mce/amd.c
+++ b/arch/x86/kernel/cpu/mce/amd.c
@@ -689,206 +689,6 @@ void mce_amd_feature_init(struct cpuinfo_x86 *c)
deferred_error_interrupt_enable(c);
}
-int umc_normaddr_to_sysaddr(u64 norm_addr, u16 nid, u8 umc, u64 *sys_addr)
-{
- u64 dram_base_addr, dram_limit_addr, dram_hole_base;
- /* We start from the normalized address */
- u64 ret_addr = norm_addr;
-
- u32 tmp;
-
- u8 die_id_shift, die_id_mask, socket_id_shift, socket_id_mask;
- u8 intlv_num_dies, intlv_num_chan, intlv_num_sockets;
- u8 intlv_addr_sel, intlv_addr_bit;
- u8 num_intlv_bits, hashed_bit;
- u8 lgcy_mmio_hole_en, base = 0;
- u8 cs_mask, cs_id = 0;
- bool hash_enabled = false;
-
- /* Read D18F0x1B4 (DramOffset), check if base 1 is used. */
- if (amd_df_indirect_read(nid, 0, 0x1B4, umc, &tmp))
- goto out_err;
-
- /* Remove HiAddrOffset from normalized address, if enabled: */
- if (tmp & BIT(0)) {
- u64 hi_addr_offset = (tmp & GENMASK_ULL(31, 20)) << 8;
-
- if (norm_addr >= hi_addr_offset) {
- ret_addr -= hi_addr_offset;
- base = 1;
- }
- }
-
- /* Read D18F0x110 (DramBaseAddress). */
- if (amd_df_indirect_read(nid, 0, 0x110 + (8 * base), umc, &tmp))
- goto out_err;
-
- /* Check if address range is valid. */
- if (!(tmp & BIT(0))) {
- pr_err("%s: Invalid DramBaseAddress range: 0x%x.\n",
- __func__, tmp);
- goto out_err;
- }
-
- lgcy_mmio_hole_en = tmp & BIT(1);
- intlv_num_chan = (tmp >> 4) & 0xF;
- intlv_addr_sel = (tmp >> 8) & 0x7;
- dram_base_addr = (tmp & GENMASK_ULL(31, 12)) << 16;
-
- /* {0, 1, 2, 3} map to address bits {8, 9, 10, 11} respectively */
- if (intlv_addr_sel > 3) {
- pr_err("%s: Invalid interleave address select %d.\n",
- __func__, intlv_addr_sel);
- goto out_err;
- }
-
- /* Read D18F0x114 (DramLimitAddress). */
- if (amd_df_indirect_read(nid, 0, 0x114 + (8 * base), umc, &tmp))
- goto out_err;
-
- intlv_num_sockets = (tmp >> 8) & 0x1;
- intlv_num_dies = (tmp >> 10) & 0x3;
- dram_limit_addr = ((tmp & GENMASK_ULL(31, 12)) << 16) | GENMASK_ULL(27, 0);
-
- intlv_addr_bit = intlv_addr_sel + 8;
-
- /* Re-use intlv_num_chan by setting it equal to log2(#channels) */
- switch (intlv_num_chan) {
- case 0: intlv_num_chan = 0; break;
- case 1: intlv_num_chan = 1; break;
- case 3: intlv_num_chan = 2; break;
- case 5: intlv_num_chan = 3; break;
- case 7: intlv_num_chan = 4; break;
-
- case 8: intlv_num_chan = 1;
- hash_enabled = true;
- break;
- default:
- pr_err("%s: Invalid number of interleaved channels %d.\n",
- __func__, intlv_num_chan);
- goto out_err;
- }
-
- num_intlv_bits = intlv_num_chan;
-
- if (intlv_num_dies > 2) {
- pr_err("%s: Invalid number of interleaved nodes/dies %d.\n",
- __func__, intlv_num_dies);
- goto out_err;
- }
-
- num_intlv_bits += intlv_num_dies;
-
- /* Add a bit if sockets are interleaved. */
- num_intlv_bits += intlv_num_sockets;
-
- /* Assert num_intlv_bits <= 4 */
- if (num_intlv_bits > 4) {
- pr_err("%s: Invalid interleave bits %d.\n",
- __func__, num_intlv_bits);
- goto out_err;
- }
-
- if (num_intlv_bits > 0) {
- u64 temp_addr_x, temp_addr_i, temp_addr_y;
- u8 die_id_bit, sock_id_bit, cs_fabric_id;
-
- /*
- * Read FabricBlockInstanceInformation3_CS[BlockFabricID].
- * This is the fabric id for this coherent slave. Use
- * umc/channel# as instance id of the coherent slave
- * for FICAA.
- */
- if (amd_df_indirect_read(nid, 0, 0x50, umc, &tmp))
- goto out_err;
-
- cs_fabric_id = (tmp >> 8) & 0xFF;
- die_id_bit = 0;
-
- /* If interleaved over more than 1 channel: */
- if (intlv_num_chan) {
- die_id_bit = intlv_num_chan;
- cs_mask = (1 << die_id_bit) - 1;
- cs_id = cs_fabric_id & cs_mask;
- }
-
- sock_id_bit = die_id_bit;
-
- /* Read D18F1x208 (SystemFabricIdMask). */
- if (intlv_num_dies || intlv_num_sockets)
- if (amd_df_indirect_read(nid, 1, 0x208, umc, &tmp))
- goto out_err;
-
- /* If interleaved over more than 1 die. */
- if (intlv_num_dies) {
- sock_id_bit = die_id_bit + intlv_num_dies;
- die_id_shift = (tmp >> 24) & 0xF;
- die_id_mask = (tmp >> 8) & 0xFF;
-
- cs_id |= ((cs_fabric_id & die_id_mask) >> die_id_shift) << die_id_bit;
- }
-
- /* If interleaved over more than 1 socket. */
- if (intlv_num_sockets) {
- socket_id_shift = (tmp >> 28) & 0xF;
- socket_id_mask = (tmp >> 16) & 0xFF;
-
- cs_id |= ((cs_fabric_id & socket_id_mask) >> socket_id_shift) << sock_id_bit;
- }
-
- /*
- * The pre-interleaved address consists of XXXXXXIIIYYYYY
- * where III is the ID for this CS, and XXXXXXYYYYY are the
- * address bits from the post-interleaved address.
- * "num_intlv_bits" has been calculated to tell us how many "I"
- * bits there are. "intlv_addr_bit" tells us how many "Y" bits
- * there are (where "I" starts).
- */
- temp_addr_y = ret_addr & GENMASK_ULL(intlv_addr_bit-1, 0);
- temp_addr_i = (cs_id << intlv_addr_bit);
- temp_addr_x = (ret_addr & GENMASK_ULL(63, intlv_addr_bit)) << num_intlv_bits;
- ret_addr = temp_addr_x | temp_addr_i | temp_addr_y;
- }
-
- /* Add dram base address */
- ret_addr += dram_base_addr;
-
- /* If legacy MMIO hole enabled */
- if (lgcy_mmio_hole_en) {
- if (amd_df_indirect_read(nid, 0, 0x104, umc, &tmp))
- goto out_err;
-
- dram_hole_base = tmp & GENMASK(31, 24);
- if (ret_addr >= dram_hole_base)
- ret_addr += (BIT_ULL(32) - dram_hole_base);
- }
-
- if (hash_enabled) {
- /* Save some parentheses and grab ls-bit at the end. */
- hashed_bit = (ret_addr >> 12) ^
- (ret_addr >> 18) ^
- (ret_addr >> 21) ^
- (ret_addr >> 30) ^
- cs_id;
-
- hashed_bit &= BIT(0);
-
- if (hashed_bit != ((ret_addr >> intlv_addr_bit) & BIT(0)))
- ret_addr ^= BIT(intlv_addr_bit);
- }
-
- /* Is calculated system address is above DRAM limit address? */
- if (ret_addr > dram_limit_addr)
- goto out_err;
-
- *sys_addr = ret_addr;
- return 0;
-
-out_err:
- return -EINVAL;
-}
-EXPORT_SYMBOL_GPL(umc_normaddr_to_sysaddr);
-
bool amd_mce_is_memory_error(struct mce *m)
{
/* ErrCodeExt[20:16] */
diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c
index f0d8f60acee1..046b98fcc4fe 100644
--- a/drivers/edac/amd64_edac.c
+++ b/drivers/edac/amd64_edac.c
@@ -993,6 +993,205 @@ static int sys_addr_to_csrow(struct mem_ctl_info *mci, u64 sys_addr)
return csrow;
}
+static int umc_normaddr_to_sysaddr(u64 norm_addr, u16 nid, u8 umc, u64 *sys_addr)
+{
+ u64 dram_base_addr, dram_limit_addr, dram_hole_base;
+ /* We start from the normalized address */
+ u64 ret_addr = norm_addr;
+
+ u32 tmp;
+
+ u8 die_id_shift, die_id_mask, socket_id_shift, socket_id_mask;
+ u8 intlv_num_dies, intlv_num_chan, intlv_num_sockets;
+ u8 intlv_addr_sel, intlv_addr_bit;
+ u8 num_intlv_bits, hashed_bit;
+ u8 lgcy_mmio_hole_en, base = 0;
+ u8 cs_mask, cs_id = 0;
+ bool hash_enabled = false;
+
+ /* Read D18F0x1B4 (DramOffset), check if base 1 is used. */
+ if (amd_df_indirect_read(nid, 0, 0x1B4, umc, &tmp))
+ goto out_err;
+
+ /* Remove HiAddrOffset from normalized address, if enabled: */
+ if (tmp & BIT(0)) {
+ u64 hi_addr_offset = (tmp & GENMASK_ULL(31, 20)) << 8;
+
+ if (norm_addr >= hi_addr_offset) {
+ ret_addr -= hi_addr_offset;
+ base = 1;
+ }
+ }
+
+ /* Read D18F0x110 (DramBaseAddress). */
+ if (amd_df_indirect_read(nid, 0, 0x110 + (8 * base), umc, &tmp))
+ goto out_err;
+
+ /* Check if address range is valid. */
+ if (!(tmp & BIT(0))) {
+ pr_err("%s: Invalid DramBaseAddress range: 0x%x.\n",
+ __func__, tmp);
+ goto out_err;
+ }
+
+ lgcy_mmio_hole_en = tmp & BIT(1);
+ intlv_num_chan = (tmp >> 4) & 0xF;
+ intlv_addr_sel = (tmp >> 8) & 0x7;
+ dram_base_addr = (tmp & GENMASK_ULL(31, 12)) << 16;
+
+ /* {0, 1, 2, 3} map to address bits {8, 9, 10, 11} respectively */
+ if (intlv_addr_sel > 3) {
+ pr_err("%s: Invalid interleave address select %d.\n",
+ __func__, intlv_addr_sel);
+ goto out_err;
+ }
+
+ /* Read D18F0x114 (DramLimitAddress). */
+ if (amd_df_indirect_read(nid, 0, 0x114 + (8 * base), umc, &tmp))
+ goto out_err;
+
+ intlv_num_sockets = (tmp >> 8) & 0x1;
+ intlv_num_dies = (tmp >> 10) & 0x3;
+ dram_limit_addr = ((tmp & GENMASK_ULL(31, 12)) << 16) | GENMASK_ULL(27, 0);
+
+ intlv_addr_bit = intlv_addr_sel + 8;
+
+ /* Re-use intlv_num_chan by setting it equal to log2(#channels) */
+ switch (intlv_num_chan) {
+ case 0: intlv_num_chan = 0; break;
+ case 1: intlv_num_chan = 1; break;
+ case 3: intlv_num_chan = 2; break;
+ case 5: intlv_num_chan = 3; break;
+ case 7: intlv_num_chan = 4; break;
+
+ case 8: intlv_num_chan = 1;
+ hash_enabled = true;
+ break;
+ default:
+ pr_err("%s: Invalid number of interleaved channels %d.\n",
+ __func__, intlv_num_chan);
+ goto out_err;
+ }
+
+ num_intlv_bits = intlv_num_chan;
+
+ if (intlv_num_dies > 2) {
+ pr_err("%s: Invalid number of interleaved nodes/dies %d.\n",
+ __func__, intlv_num_dies);
+ goto out_err;
+ }
+
+ num_intlv_bits += intlv_num_dies;
+
+ /* Add a bit if sockets are interleaved. */
+ num_intlv_bits += intlv_num_sockets;
+
+ /* Assert num_intlv_bits <= 4 */
+ if (num_intlv_bits > 4) {
+ pr_err("%s: Invalid interleave bits %d.\n",
+ __func__, num_intlv_bits);
+ goto out_err;
+ }
+
+ if (num_intlv_bits > 0) {
+ u64 temp_addr_x, temp_addr_i, temp_addr_y;
+ u8 die_id_bit, sock_id_bit, cs_fabric_id;
+
+ /*
+ * Read FabricBlockInstanceInformation3_CS[BlockFabricID].
+ * This is the fabric id for this coherent slave. Use
+ * umc/channel# as instance id of the coherent slave
+ * for FICAA.
+ */
+ if (amd_df_indirect_read(nid, 0, 0x50, umc, &tmp))
+ goto out_err;
+
+ cs_fabric_id = (tmp >> 8) & 0xFF;
+ die_id_bit = 0;
+
+ /* If interleaved over more than 1 channel: */
+ if (intlv_num_chan) {
+ die_id_bit = intlv_num_chan;
+ cs_mask = (1 << die_id_bit) - 1;
+ cs_id = cs_fabric_id & cs_mask;
+ }
+
+ sock_id_bit = die_id_bit;
+
+ /* Read D18F1x208 (SystemFabricIdMask). */
+ if (intlv_num_dies || intlv_num_sockets)
+ if (amd_df_indirect_read(nid, 1, 0x208, umc, &tmp))
+ goto out_err;
+
+ /* If interleaved over more than 1 die. */
+ if (intlv_num_dies) {
+ sock_id_bit = die_id_bit + intlv_num_dies;
+ die_id_shift = (tmp >> 24) & 0xF;
+ die_id_mask = (tmp >> 8) & 0xFF;
+
+ cs_id |= ((cs_fabric_id & die_id_mask) >> die_id_shift) << die_id_bit;
+ }
+
+ /* If interleaved over more than 1 socket. */
+ if (intlv_num_sockets) {
+ socket_id_shift = (tmp >> 28) & 0xF;
+ socket_id_mask = (tmp >> 16) & 0xFF;
+
+ cs_id |= ((cs_fabric_id & socket_id_mask) >> socket_id_shift) << sock_id_bit;
+ }
+
+ /*
+ * The pre-interleaved address consists of XXXXXXIIIYYYYY
+ * where III is the ID for this CS, and XXXXXXYYYYY are the
+ * address bits from the post-interleaved address.
+ * "num_intlv_bits" has been calculated to tell us how many "I"
+ * bits there are. "intlv_addr_bit" tells us how many "Y" bits
+ * there are (where "I" starts).
+ */
+ temp_addr_y = ret_addr & GENMASK_ULL(intlv_addr_bit-1, 0);
+ temp_addr_i = (cs_id << intlv_addr_bit);
+ temp_addr_x = (ret_addr & GENMASK_ULL(63, intlv_addr_bit)) << num_intlv_bits;
+ ret_addr = temp_addr_x | temp_addr_i | temp_addr_y;
+ }
+
+ /* Add dram base address */
+ ret_addr += dram_base_addr;
+
+ /* If legacy MMIO hole enabled */
+ if (lgcy_mmio_hole_en) {
+ if (amd_df_indirect_read(nid, 0, 0x104, umc, &tmp))
+ goto out_err;
+
+ dram_hole_base = tmp & GENMASK(31, 24);
+ if (ret_addr >= dram_hole_base)
+ ret_addr += (BIT_ULL(32) - dram_hole_base);
+ }
+
+ if (hash_enabled) {
+ /* Save some parentheses and grab ls-bit at the end. */
+ hashed_bit = (ret_addr >> 12) ^
+ (ret_addr >> 18) ^
+ (ret_addr >> 21) ^
+ (ret_addr >> 30) ^
+ cs_id;
+
+ hashed_bit &= BIT(0);
+
+ if (hashed_bit != ((ret_addr >> intlv_addr_bit) & BIT(0)))
+ ret_addr ^= BIT(intlv_addr_bit);
+ }
+
+ /* Is calculated system address is above DRAM limit address? */
+ if (ret_addr > dram_limit_addr)
+ goto out_err;
+
+ *sys_addr = ret_addr;
+ return 0;
+
+out_err:
+ return -EINVAL;
+}
+
static int get_channel_from_ecc_syndrome(struct mem_ctl_info *, u16);
/*
--
2.25.1
next prev parent reply other threads:[~2021-06-23 19:20 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-23 19:19 [PATCH v2 00/31] AMD MCA Address Translation Updates Yazen Ghannam
2021-06-23 19:19 ` Yazen Ghannam [this message]
2021-06-23 19:19 ` [PATCH v2 02/31] x86/amd_nb, EDAC/amd64: Move DF Indirect Read to AMD64 EDAC Yazen Ghannam
2021-06-23 19:19 ` [PATCH v2 03/31] EDAC/amd64: Don't use naked values for DF registers Yazen Ghannam
2021-06-25 15:21 ` Borislav Petkov
2021-07-08 19:35 ` Yazen Ghannam
2021-06-23 19:19 ` [PATCH v2 04/31] EDAC/amd64: Allow for DF Indirect Broadcast reads Yazen Ghannam
2021-06-30 16:22 ` Borislav Petkov
2021-07-08 19:44 ` Yazen Ghannam
2021-06-23 19:19 ` [PATCH v2 05/31] EDAC/amd64: Add context struct Yazen Ghannam
2021-06-30 17:17 ` Borislav Petkov
2021-07-08 19:53 ` Yazen Ghannam
2021-06-23 19:19 ` [PATCH v2 06/31] EDAC/amd64: Define Data Fabric operations Yazen Ghannam
2021-06-30 17:19 ` Borislav Petkov
2021-07-08 19:55 ` Yazen Ghannam
2021-06-23 19:19 ` [PATCH v2 07/31] EDAC/amd64: Define functions for DramOffset Yazen Ghannam
2021-06-30 17:27 ` Borislav Petkov
2021-07-08 20:08 ` Yazen Ghannam
2021-06-23 19:19 ` [PATCH v2 08/31] EDAC/amd64: Define function to read DRAM address map registers Yazen Ghannam
2021-06-30 17:29 ` Borislav Petkov
2021-06-23 19:19 ` [PATCH v2 09/31] EDAC/amd64: Define function to find interleaving mode Yazen Ghannam
2021-06-30 17:33 ` Borislav Petkov
2021-07-08 20:09 ` Yazen Ghannam
2021-06-23 19:19 ` [PATCH v2 10/31] EDAC/amd64: Define function to denormalize address Yazen Ghannam
2021-06-23 19:19 ` [PATCH v2 11/31] EDAC/amd64: Define function to add DRAM base and hole Yazen Ghannam
2021-06-23 19:19 ` [PATCH v2 12/31] EDAC/amd64: Define function to dehash address Yazen Ghannam
2021-06-23 19:19 ` [PATCH v2 13/31] EDAC/amd64: Define function to check DRAM limit address Yazen Ghannam
2021-06-23 19:19 ` [PATCH v2 14/31] EDAC/amd64: Remove goto statements Yazen Ghannam
2021-06-23 19:19 ` [PATCH v2 15/31] EDAC/amd64: Simplify function parameters Yazen Ghannam
2021-06-23 19:19 ` [PATCH v2 16/31] EDAC/amd64: Define function to get Interleave Address Bit Yazen Ghannam
2021-06-23 19:19 ` [PATCH v2 17/31] EDAC/amd64: Skip denormalization if no interleaving Yazen Ghannam
2021-06-23 19:19 ` [PATCH v2 18/31] EDAC/amd64: Define function to get number of interleaved channels Yazen Ghannam
2021-06-23 19:19 ` [PATCH v2 19/31] EDAC/amd64: Define function to get number of interleaved dies Yazen Ghannam
2021-06-23 19:19 ` [PATCH v2 20/31] EDAC/amd64: Define function to get number of interleaved sockets Yazen Ghannam
2021-06-23 19:19 ` [PATCH v2 21/31] EDAC/amd64: Remove unnecessary assert Yazen Ghannam
2021-06-23 19:19 ` [PATCH v2 22/31] EDAC/amd64: Define function to make space for CS ID Yazen Ghannam
2021-06-23 19:19 ` [PATCH v2 23/31] EDAC/amd64: Define function to calculate " Yazen Ghannam
2021-06-23 19:19 ` [PATCH v2 24/31] EDAC/amd64: Define function to insert CS ID into address Yazen Ghannam
2021-06-23 19:19 ` [PATCH v2 25/31] EDAC/amd64: Define function to get CS Fabric ID Yazen Ghannam
2021-06-23 19:19 ` [PATCH v2 26/31] EDAC/amd64: Define function to find shift and mask values Yazen Ghannam
2021-06-23 19:19 ` [PATCH v2 27/31] EDAC/amd64: Update CS ID calculation to match reference code Yazen Ghannam
2021-06-23 19:19 ` [PATCH v2 28/31] EDAC/amd64: Match hash function to " Yazen Ghannam
2021-06-23 19:20 ` [PATCH v2 29/31] EDAC/amd64: Define helper function to get interleave address select bit Yazen Ghannam
2021-06-23 19:20 ` [PATCH v2 30/31] EDAC/amd64: Add support for address translation on DF3 systems Yazen Ghannam
2021-06-23 19:20 ` [PATCH v2 31/31] EDAC/amd64: Add glossary of acronyms for address translation Yazen Ghannam
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210623192002.3671647-2-yazen.ghannam@amd.com \
--to=yazen.ghannam@amd.com \
--cc=Smita.KoralahalliChannabasappa@amd.com \
--cc=bp@alien8.de \
--cc=linux-edac@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=tony.luck@intel.com \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).