[PATCH v5 11/20] EDAC/synopsys: Shorten out struct ecc_error_info.bankgrpnr field name

[Serge Semin <fancer.lancer@gmail.com>]

None of the ecc_error_info structure fields have "nr" suffix even though
each of them do represent some number (row number, column number, bank
number). Drop the suffix from the bankgrpnr field name for the sake of
unification then. Similarly drop the word "Number" from the CE/UE error
messages too since it doesn't give any helpful info there.

Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
---
 drivers/edac/synopsys_edac.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/edac/synopsys_edac.c b/drivers/edac/synopsys_edac.c
index 6ca119459bd3..b0ff831287f5 100644
--- a/drivers/edac/synopsys_edac.c
+++ b/drivers/edac/synopsys_edac.c
@@ -268,17 +268,17 @@
  * @row:	Row number.
  * @col:	Column number.
  * @bank:	Bank number.
+ * @bankgrp:	Bank group number.
  * @bitpos:	Bit position.
  * @data:	Data causing the error.
- * @bankgrpnr:	Bank group number.
  */
 struct ecc_error_info {
 	u32 row;
 	u32 col;
 	u32 bank;
+	u32 bankgrp;
 	u32 bitpos;
 	u32 data;
-	u32 bankgrpnr;
 };
 
 /**
@@ -429,7 +429,7 @@ static int zynqmp_get_error_info(struct synps_edac_priv *priv)
 	regval = readl(base + ECC_CEADDR1_OFST);
 	p->ceinfo.bank = (regval & ECC_CEADDR1_BNKNR_MASK) >>
 					ECC_CEADDR1_BNKNR_SHIFT;
-	p->ceinfo.bankgrpnr = (regval &	ECC_CEADDR1_BNKGRP_MASK) >>
+	p->ceinfo.bankgrp = (regval & ECC_CEADDR1_BNKGRP_MASK) >>
 					ECC_CEADDR1_BNKGRP_SHIFT;
 	p->ceinfo.col = (regval & ECC_CEADDR1_COL_MASK);
 	p->ceinfo.data = readl(base + ECC_CSYND0_OFST);
@@ -443,7 +443,7 @@ static int zynqmp_get_error_info(struct synps_edac_priv *priv)
 	regval = readl(base + ECC_UEADDR0_OFST);
 	p->ueinfo.row = (regval & ECC_CEADDR0_RW_MASK);
 	regval = readl(base + ECC_UEADDR1_OFST);
-	p->ueinfo.bankgrpnr = (regval & ECC_CEADDR1_BNKGRP_MASK) >>
+	p->ueinfo.bankgrp = (regval & ECC_CEADDR1_BNKGRP_MASK) >>
 					ECC_CEADDR1_BNKGRP_SHIFT;
 	p->ueinfo.bank = (regval & ECC_CEADDR1_BNKNR_MASK) >>
 					ECC_CEADDR1_BNKNR_SHIFT;
@@ -478,9 +478,9 @@ static void handle_error(struct mem_ctl_info *mci, struct synps_ecc_status *p)
 		pinf = &p->ceinfo;
 		if (priv->p_data->quirks & DDR_ECC_INTR_SUPPORT) {
 			snprintf(priv->message, SYNPS_EDAC_MSG_SIZE,
-				 "DDR ECC error type:%s Row %d Col %d Bank %d BankGroup Number %d Bit Position: %d Data: 0x%08x",
+				 "DDR ECC error type:%s Row %d Col %d Bank %d Bank Group %d Bit Position: %d Data: 0x%08x",
 				 "CE", pinf->row, pinf->col, pinf->bank,
-				 pinf->bankgrpnr, pinf->bitpos, pinf->data);
+				 pinf->bankgrp, pinf->bitpos, pinf->data);
 		} else {
 			snprintf(priv->message, SYNPS_EDAC_MSG_SIZE,
 				 "DDR ECC error type:%s Row %d Bank %d Col %d Bit Position: %d Data: 0x%08x",
@@ -497,9 +497,9 @@ static void handle_error(struct mem_ctl_info *mci, struct synps_ecc_status *p)
 		pinf = &p->ueinfo;
 		if (priv->p_data->quirks & DDR_ECC_INTR_SUPPORT) {
 			snprintf(priv->message, SYNPS_EDAC_MSG_SIZE,
-				 "DDR ECC error type :%s Row %d Col %d Bank %d BankGroup Number %d",
+				 "DDR ECC error type :%s Row %d Col %d Bank %d Bank Group %d",
 				 "UE", pinf->row, pinf->col, pinf->bank,
-				 pinf->bankgrpnr);
+				 pinf->bankgrp);
 		} else {
 			snprintf(priv->message, SYNPS_EDAC_MSG_SIZE,
 				 "DDR ECC error type :%s Row %d Bank %d Col %d ",
-- 
2.43.0