From: Arvind Sankar <nivedita@alum.mit.edu>
To: Ard Biesheuvel <ardb@kernel.org>
Cc: linux-efi@vger.kernel.org, x86@kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v2 07/11] efi/libstub: Upgrade ignored dtb= argument message to error
Date: Thu, 30 Apr 2020 14:28:39 -0400 [thread overview]
Message-ID: <20200430182843.2510180-8-nivedita@alum.mit.edu> (raw)
In-Reply-To: <20200430182843.2510180-1-nivedita@alum.mit.edu>
Use efi_err if we ignore a command-line dtb= argument, so that it shows
up even on a quiet boot.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
---
drivers/firmware/efi/libstub/efi-stub.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/firmware/efi/libstub/efi-stub.c b/drivers/firmware/efi/libstub/efi-stub.c
index 72ffd2670f99..cb02e8bb6b44 100644
--- a/drivers/firmware/efi/libstub/efi-stub.c
+++ b/drivers/firmware/efi/libstub/efi-stub.c
@@ -241,7 +241,7 @@ efi_status_t efi_entry(efi_handle_t handle, efi_system_table_t *sys_table_arg)
if (!IS_ENABLED(CONFIG_EFI_ARMSTUB_DTB_LOADER) ||
secure_boot != efi_secureboot_mode_disabled) {
if (strstr(cmdline_ptr, "dtb="))
- efi_info("Ignoring DTB from command line.\n");
+ efi_err("Ignoring DTB from command line.\n");
} else {
status = efi_load_dtb(image, &fdt_addr, &fdt_size);
--
2.26.2
next prev parent reply other threads:[~2020-04-30 18:28 UTC|newest]
Thread overview: 57+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-04-29 17:41 [PATCH 00/10] efi: some cleanups/refactoring for efi/next Arvind Sankar
2020-04-29 17:41 ` [PATCH 01/10] efi/x86: Use correct size for boot_params Arvind Sankar
2020-04-29 17:41 ` [PATCH 02/10] efi: Add a helper function to split 64-bit values Arvind Sankar
2020-04-29 23:51 ` kbuild test robot
2020-04-29 17:41 ` [PATCH 02/10] efi/libstub: " Arvind Sankar
2020-04-29 17:41 ` [PATCH 03/10] efi/x86: Use pr_efi_err for error messages Arvind Sankar
2020-04-29 18:47 ` Joe Perches
2020-04-29 18:49 ` Ard Biesheuvel
2020-04-29 18:57 ` Joe Perches
2020-04-29 18:59 ` Ard Biesheuvel
2020-04-29 19:47 ` Joe Perches
2020-04-29 19:48 ` Ard Biesheuvel
2020-04-29 21:43 ` Arvind Sankar
2020-04-29 21:45 ` Ard Biesheuvel
2020-04-29 21:51 ` Arvind Sankar
2020-04-29 21:53 ` Joe Perches
2020-04-29 21:55 ` Ard Biesheuvel
2020-04-29 22:20 ` Arvind Sankar
2020-04-30 15:14 ` Ard Biesheuvel
2020-04-29 17:41 ` [PATCH 04/10] efi/gop: " Arvind Sankar
2020-04-29 17:41 ` [PATCH 05/10] efi/tpm: " Arvind Sankar
2020-04-29 17:41 ` [PATCH 06/10] efi/x86: Move command-line initrd loading to efi_main Arvind Sankar
2020-04-29 17:41 ` [PATCH 07/10] efi/libstub: Unify initrd loading across architectures Arvind Sankar
2020-04-29 17:41 ` [PATCH 08/10] efi/x86: Drop soft_limit for x86 initrd loading Arvind Sankar
2020-04-29 19:05 ` Ard Biesheuvel
2020-04-29 21:33 ` Arvind Sankar
2020-04-29 17:41 ` [PATCH 09/10] efi/x86: Support builtin command line Arvind Sankar
2020-04-29 19:07 ` Ard Biesheuvel
2020-04-29 21:39 ` Arvind Sankar
2020-04-29 21:40 ` Ard Biesheuvel
2020-04-29 21:48 ` Arvind Sankar
2020-04-29 21:51 ` Ard Biesheuvel
2020-04-29 17:41 ` [PATCH 10/10] efi/libstub: Check return value of efi_parse_options Arvind Sankar
2020-04-30 4:31 ` kbuild test robot
2020-04-30 18:28 ` [PATCH v2 00/11] efi: some cleanups/refactoring for efi/next Arvind Sankar
2020-04-30 18:28 ` [PATCH v2 01/11] efi/x86: Use correct size for boot_params Arvind Sankar
2020-04-30 18:28 ` [PATCH v2 02/11] efi/libstub: Add a helper function to split 64-bit values Arvind Sankar
2020-04-30 18:28 ` [PATCH v2 03/11] efi/libstub: Move pr_efi/pr_efi_err into efi namespace Arvind Sankar
2020-04-30 18:28 ` [PATCH v2 04/11] efi/x86: Use efi_err for error messages Arvind Sankar
2020-04-30 18:28 ` [PATCH v2 05/11] efi/gop: " Arvind Sankar
2020-04-30 18:28 ` [PATCH v2 06/11] efi/tpm: " Arvind Sankar
2020-04-30 18:28 ` Arvind Sankar [this message]
2020-04-30 18:28 ` [PATCH v2 08/11] efi/x86: Move command-line initrd loading to efi_main Arvind Sankar
2020-04-30 18:28 ` [PATCH v2 09/11] efi/libstub: Unify initrd loading across architectures Arvind Sankar
2020-04-30 18:28 ` [PATCH v2 10/11] efi/x86: Support builtin command line Arvind Sankar
2020-04-30 18:28 ` [PATCH v2 11/11] efi/libstub: Check return value of efi_parse_options Arvind Sankar
2020-04-30 19:12 ` [PATCH 1/2] efi/libstub: efi_info/efi_err message neatening Joe Perches
2020-04-30 19:12 ` [PATCH 2/2] efi/libstub: Correct comment typos Joe Perches
2020-04-30 19:30 ` Ard Biesheuvel
2020-05-04 18:29 ` [trivial PATCH] efi/libstub: Reduce efi_printk object size Joe Perches
2020-05-05 7:50 ` Ard Biesheuvel
2020-05-05 8:01 ` Joe Perches
2020-04-30 19:29 ` [PATCH 1/2] efi/libstub: efi_info/efi_err message neatening Ard Biesheuvel
2020-04-30 19:38 ` Joe Perches
2020-04-30 20:40 ` Arvind Sankar
2020-04-30 20:42 ` Ard Biesheuvel
2020-05-04 8:17 ` [PATCH v2 00/11] efi: some cleanups/refactoring for efi/next Ard Biesheuvel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200430182843.2510180-8-nivedita@alum.mit.edu \
--to=nivedita@alum.mit.edu \
--cc=ardb@kernel.org \
--cc=linux-efi@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).