From: Ilias Apalodimas <ilias.apalodimas@linaro.org>
To: linux-efi@vger.kernel.org, ardb@kernel.org,
James.Bottomley@hansenpartnership.com
Cc: pjones@redhat.com, nivedita@alum.mit.edu, mjg59@google.com,
daniel.kiper@oracle.com, leif@nuviainc.com,
Ilias Apalodimas <ilias.apalodimas@linaro.org>
Subject: [PATCH 3/4 v2] efi/libstub: consolidate initrd handling across architectures
Date: Thu, 2 Sep 2021 11:04:15 +0300 [thread overview]
Message-ID: <20210902080416.5461-4-ilias.apalodimas@linaro.org> (raw)
In-Reply-To: <20210902080416.5461-1-ilias.apalodimas@linaro.org>
From: Ard Biesheuvel <ardb@kernel.org>
Before adding TPM measurement of the initrd contents, refactor the
initrd handling slightly to be more self-contained and consistent.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
---
.../firmware/efi/libstub/efi-stub-helper.c | 13 +++++++---
drivers/firmware/efi/libstub/efi-stub.c | 10 ++-----
drivers/firmware/efi/libstub/efistub.h | 1 -
drivers/firmware/efi/libstub/x86-stub.c | 26 +++++++------------
4 files changed, 21 insertions(+), 29 deletions(-)
diff --git a/drivers/firmware/efi/libstub/efi-stub-helper.c b/drivers/firmware/efi/libstub/efi-stub-helper.c
index aa8da0a49829..72a7e7c4d403 100644
--- a/drivers/firmware/efi/libstub/efi-stub-helper.c
+++ b/drivers/firmware/efi/libstub/efi-stub-helper.c
@@ -20,10 +20,10 @@
bool efi_nochunk;
bool efi_nokaslr = !IS_ENABLED(CONFIG_RANDOMIZE_BASE);
-bool efi_noinitrd;
int efi_loglevel = CONSOLE_LOGLEVEL_DEFAULT;
bool efi_novamap;
+static bool efi_noinitrd;
static bool efi_nosoftreserve;
static bool efi_disable_pci_dma = IS_ENABLED(CONFIG_EFI_DISABLE_PCI_DMA);
@@ -643,8 +643,10 @@ efi_status_t efi_load_initrd(efi_loaded_image_t *image,
{
efi_status_t status;
- if (!load_addr || !load_size)
- return EFI_INVALID_PARAMETER;
+ if (efi_noinitrd) {
+ *load_addr = *load_size = 0;
+ return EFI_SUCCESS;
+ }
status = efi_load_initrd_dev_path(load_addr, load_size, hard_limit);
if (status == EFI_SUCCESS) {
@@ -655,7 +657,10 @@ efi_status_t efi_load_initrd(efi_loaded_image_t *image,
if (status == EFI_SUCCESS && *load_size > 0)
efi_info("Loaded initrd from command line option\n");
}
-
+ if (status != EFI_SUCCESS) {
+ efi_err("Failed to load initrd: 0x%lx\n", status);
+ *load_addr = *load_size = 0;
+ }
return status;
}
diff --git a/drivers/firmware/efi/libstub/efi-stub.c b/drivers/firmware/efi/libstub/efi-stub.c
index 26e69788f27a..e87e7f1b1a33 100644
--- a/drivers/firmware/efi/libstub/efi-stub.c
+++ b/drivers/firmware/efi/libstub/efi-stub.c
@@ -134,7 +134,6 @@ efi_status_t __efiapi efi_pe_entry(efi_handle_t handle,
enum efi_secureboot_mode secure_boot;
struct screen_info *si;
efi_properties_table_t *prop_tbl;
- unsigned long max_addr;
efi_system_table = sys_table_arg;
@@ -240,13 +239,8 @@ efi_status_t __efiapi efi_pe_entry(efi_handle_t handle,
if (!fdt_addr)
efi_info("Generating empty DTB\n");
- if (!efi_noinitrd) {
- max_addr = efi_get_max_initrd_addr(image_addr);
- status = efi_load_initrd(image, &initrd_addr, &initrd_size,
- ULONG_MAX, max_addr);
- if (status != EFI_SUCCESS)
- efi_err("Failed to load initrd!\n");
- }
+ efi_load_initrd(image, &initrd_addr, &initrd_size, ULONG_MAX,
+ efi_get_max_initrd_addr(image_addr));
efi_random_get_seed();
diff --git a/drivers/firmware/efi/libstub/efistub.h b/drivers/firmware/efi/libstub/efistub.h
index a2825c435158..edb77b0621ea 100644
--- a/drivers/firmware/efi/libstub/efistub.h
+++ b/drivers/firmware/efi/libstub/efistub.h
@@ -31,7 +31,6 @@
extern bool efi_nochunk;
extern bool efi_nokaslr;
-extern bool efi_noinitrd;
extern int efi_loglevel;
extern bool efi_novamap;
diff --git a/drivers/firmware/efi/libstub/x86-stub.c b/drivers/firmware/efi/libstub/x86-stub.c
index f14c4ff5839f..01ddd4502e28 100644
--- a/drivers/firmware/efi/libstub/x86-stub.c
+++ b/drivers/firmware/efi/libstub/x86-stub.c
@@ -673,6 +673,7 @@ unsigned long efi_main(efi_handle_t handle,
unsigned long bzimage_addr = (unsigned long)startup_32;
unsigned long buffer_start, buffer_end;
struct setup_header *hdr = &boot_params->hdr;
+ unsigned long addr, size;
efi_status_t status;
efi_system_table = sys_table_arg;
@@ -761,22 +762,15 @@ unsigned long efi_main(efi_handle_t handle,
* arguments will be processed only if image is not NULL, which will be
* the case only if we were loaded via the PE entry point.
*/
- if (!efi_noinitrd) {
- unsigned long addr, size;
-
- status = efi_load_initrd(image, &addr, &size,
- hdr->initrd_addr_max, ULONG_MAX);
-
- if (status != EFI_SUCCESS) {
- efi_err("Failed to load initrd!\n");
- goto fail;
- }
- if (size > 0) {
- efi_set_u64_split(addr, &hdr->ramdisk_image,
- &boot_params->ext_ramdisk_image);
- efi_set_u64_split(size, &hdr->ramdisk_size,
- &boot_params->ext_ramdisk_size);
- }
+ status = efi_load_initrd(image, &addr, &size, hdr->initrd_addr_max,
+ ULONG_MAX);
+ if (status != EFI_SUCCESS)
+ goto fail;
+ if (size > 0) {
+ efi_set_u64_split(addr, &hdr->ramdisk_image,
+ &boot_params->ext_ramdisk_image);
+ efi_set_u64_split(size, &hdr->ramdisk_size,
+ &boot_params->ext_ramdisk_size);
}
/*
--
2.32.0.rc0
next prev parent reply other threads:[~2021-09-02 8:05 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-09-02 8:04 [PATCH 0/4 v2] efi/libstub: measure initrd data loaded by the EFI stub Ilias Apalodimas
2021-09-02 8:04 ` [PATCH 1/4 v2] efi/libstub: add prototype of efi_tcg2_protocol::hash_log_extend_event() Ilias Apalodimas
2021-09-02 8:04 ` [PATCH 2/4 v2] efi/libstub: x86/mixed: increase supported argument count Ilias Apalodimas
2021-09-02 8:27 ` Ard Biesheuvel
2021-09-02 8:37 ` Ilias Apalodimas
2021-09-02 8:39 ` Ilias Apalodimas
2021-09-02 8:04 ` Ilias Apalodimas [this message]
2021-09-02 8:04 ` [PATCH 4/4 v2] efi/libstub: measure loaded initrd info into the TPM Ilias Apalodimas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210902080416.5461-4-ilias.apalodimas@linaro.org \
--to=ilias.apalodimas@linaro.org \
--cc=James.Bottomley@hansenpartnership.com \
--cc=ardb@kernel.org \
--cc=daniel.kiper@oracle.com \
--cc=leif@nuviainc.com \
--cc=linux-efi@vger.kernel.org \
--cc=mjg59@google.com \
--cc=nivedita@alum.mit.edu \
--cc=pjones@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).