From: James Morse <james.morse@arm.com>
To: Xiaofei Tan <tanxiaofei@huawei.com>
Cc: linux-kernel@vger.kernel.org, linux-acpi@vger.kernel.org,
linux-efi@vger.kernel.org, rjw@rjwysocki.net, lenb@kernel.org,
tony.luck@intel.com, bp@alien8.de, ying.huang@intel.com,
ross.lagerwall@citrix.com, ard.biesheuvel@linaro.org,
lance.ortiz@hp.com
Subject: Re: [PATCH 1/1] efi: cper: print AER info of PCIe fatal error
Date: Thu, 25 Jul 2019 13:44:10 +0100 [thread overview]
Message-ID: <e596aec8-1239-0a46-39cf-e682fada9945@arm.com> (raw)
In-Reply-To: <1562898017-27166-1-git-send-email-tanxiaofei@huawei.com>
Hi,
On 12/07/2019 03:20, Xiaofei Tan wrote:
> AER info of PCIe fatal error is not printed in the current driver.
> Because APEI driver will panic directly for fatal error, and can't
> run to the place of printing AER info.
>
> An example log is as following:
> [ 3157.655028] {763}[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 11
> [ 3157.663610] {763}[Hardware Error]: event severity: fatal
> [ 3157.663612] {763}[Hardware Error]: Error 0, type: fatal
> [ 3157.663614] {763}[Hardware Error]: section_type: PCIe error
> [ 3157.680328] {763}[Hardware Error]: port_type: 0, PCIe end point
> [ 3157.680329] {763}[Hardware Error]: version: 4.0
> [ 3157.680332] {763}[Hardware Error]: command: 0x0000, status: 0x0010
> [ 3157.698757] {763}[Hardware Error]: device_id: 0000:82:00.0
> [ 3157.698758] {763}[Hardware Error]: slot: 0
> [ 3157.698759] {763}[Hardware Error]: secondary_bus: 0x00
> [ 3157.698760] {763}[Hardware Error]: vendor_id: 0x8086, device_id: 0x10fb
> [ 3157.698761] {763}[Hardware Error]: class_code: 000002
> [ 3157.698825] Kernel panic - not syncing: Fatal hardware error!
>
> This issue was imported by the patch, '37448adfc7ce ("aerdrv: Move
> cper_print_aer() call out of interrupt context")'. To fix this issue,
> this patch adds print of AER info in cper_print_pcie() for fatal error.
>
> Here is the example log after this patch applied:
> [ 7032.893566] {24}[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 10
> [ 7032.901965] {24}[Hardware Error]: event severity: fatal
> [ 7032.907166] {24}[Hardware Error]: Error 0, type: fatal
> [ 7032.912366] {24}[Hardware Error]: section_type: PCIe error
> [ 7032.917998] {24}[Hardware Error]: port_type: 0, PCIe end point
> [ 7032.923974] {24}[Hardware Error]: version: 4.0
> [ 7032.928569] {24}[Hardware Error]: command: 0x0546, status: 0x4010
> [ 7032.934806] {24}[Hardware Error]: device_id: 0000:01:00.0
> [ 7032.940352] {24}[Hardware Error]: slot: 0
> [ 7032.944514] {24}[Hardware Error]: secondary_bus: 0x00
> [ 7032.949714] {24}[Hardware Error]: vendor_id: 0x15b3, device_id: 0x1019
> [ 7032.956381] {24}[Hardware Error]: class_code: 000002
> [ 7032.961495] {24}[Hardware Error]: aer_uncor_status: 0x00040000, aer_uncor_mask: 0x00000000
> [ 7032.969891] {24}[Hardware Error]: aer_uncor_severity: 0x00062010
> [ 7032.976042] {24}[Hardware Error]: TLP Header: 000000c0 01010000 00000001 00000000
> [ 7032.983663] Kernel panic - not syncing: Fatal hardware error!
> Fixes: 37448adfc7ce ("aerdrv: Move cper_print_aer() call out of
> interrupt context")
(Please put this all on one line)
> diff --git a/drivers/firmware/efi/cper.c b/drivers/firmware/efi/cper.c
> index 8fa977c..bf8600d 100644
> --- a/drivers/firmware/efi/cper.c
> +++ b/drivers/firmware/efi/cper.c
> @@ -390,6 +390,19 @@ static void cper_print_pcie(const char *pfx, const struct cper_sec_pcie *pcie,
> printk(
> "%s""bridge: secondary_status: 0x%04x, control: 0x%04x\n",
> pfx, pcie->bridge.secondary_status, pcie->bridge.control);
It may be worth a comment explaining why we only do this for fatal errors. Something like:
| /* Fatal errors call __ghes_panic() before the AER handler gets to print this */
> + if (pcie->validation_bits & CPER_PCIE_VALID_AER_INFO &&
> + gdata->error_severity & CPER_SEV_FATAL) {
> + struct aer_capability_regs *aer;
> +
> + aer = (struct aer_capability_regs *)pcie->aer_info;
> + printk("%saer_uncor_status: 0x%08x, aer_uncor_mask: 0x%08x\n",
The convention in the rest of the file is for the prefix format string to be separate. i.e:
| "%s""aer_uncor_status: ..."
Could it be the same for consistency?
> + pfx, aer->uncor_status, aer->uncor_mask);
> + printk("%saer_uncor_severity: 0x%08x\n",
> + pfx, aer->uncor_severity);
> + printk("%sTLP Header: %08x %08x %08x %08x\n", pfx,
> + aer->header_log.dw0, aer->header_log.dw1,
> + aer->header_log.dw2, aer->header_log.dw3);
> + }
> }
Regardless,
Reviewed-by; James Morse <james.morse@arm.com>
Thanks,
James
next prev parent reply other threads:[~2019-07-25 12:44 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-12 2:20 [PATCH 1/1] efi: cper: print AER info of PCIe fatal error Xiaofei Tan
2019-07-25 12:44 ` James Morse [this message]
2019-07-25 13:59 ` tanxiaofei
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=e596aec8-1239-0a46-39cf-e682fada9945@arm.com \
--to=james.morse@arm.com \
--cc=ard.biesheuvel@linaro.org \
--cc=bp@alien8.de \
--cc=lance.ortiz@hp.com \
--cc=lenb@kernel.org \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-efi@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=rjw@rjwysocki.net \
--cc=ross.lagerwall@citrix.com \
--cc=tanxiaofei@huawei.com \
--cc=tony.luck@intel.com \
--cc=ying.huang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).