linux-ext4.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: harshad shirwadkar <harshadshirwadkar@gmail.com>
To: "Theodore Y. Ts'o" <tytso@mit.edu>
Cc: Ext4 Developers List <linux-ext4@vger.kernel.org>
Subject: Re: [PATCH v3 00/13] ext4: add fast commit support
Date: Fri, 4 Oct 2019 13:11:53 -0700	[thread overview]
Message-ID: <CAD+ocbyQOwH=+L6cmo14m9zfDV2YtZOGYb=Cgv_V+=oVSCfjCQ@mail.gmail.com> (raw)
In-Reply-To: <20191004191247.GA12012@mit.edu>

Thanks for that, I fixed this deadlock, I'll run all the tests that
you mentioned.

On Fri, Oct 4, 2019 at 12:12 PM Theodore Y. Ts'o <tytso@mit.edu> wrote:
>
> On Tue, Oct 01, 2019 at 12:40:49AM -0700, Harshad Shirwadkar wrote:
> >
> > Testing
> > -------
> >
> > e2fsprogs was updated to set fast commit feature flag and to ignore
> > fast commit blocks during e2fsck.
> >
> > https://github.com/harshadjs/e2fsprogs.git
> >
> > After applying all the patches in this series, following runs of
> > xfstests were performed:
> >
> > - kvm-xfstest.sh -g log -c 4k
> > - kvm-xfstests.sh smoke
> >
> > All the log tests were successful and smoke tests didn't introduce any
> > additional failures.
>
> You should probably also try running the shutdown tests, and
> eventually, run all of the auto group.  I've added a fast_commit group
> to {kvm,gce}-xfstests, although to use it a modified e2fsprogs which
> understands the fast_commit feature.  I can make kvm-xfstests and
> gce-xfstests image using an e2fsprogs package from debian/experimental
> which has fast_commit enabled.
>
> When I tried running all of the auto group tests, the following
> failure was found in generic/047 (which is a shutdown group test).
>
>                                                 - Ted
>
> BEGIN TEST fast_commit (1 test): Ext4 4k block w/fast_commit Fri Oct  4 13:44:45 EDT 2019
> DEVICE: /dev/vdd
> EXT_MKFS_OPTIONS: -I 256 -O fast_commit,64bit
> EXT_MOUNT_OPTIONS: -o block_validity
> FSTYP         -- ext4
> PLATFORM      -- Linux/x86_64 kvm-xfstests 5.3.0-rc4-xfstests-00012-gedca88337ca9 #1202 SMP Thu Oct 3 17:27:50 EDT 2019
> MKFS_OPTIONS  -- -q -I 256 -O fast_commit,64bit /dev/vdc
> MOUNT_OPTIONS -- -o acl,user_xattr -o block_validity /dev/vdc /vdc
>
> generic/047             [13:44:46][   24.671344] run fstests generic/047 at 2019-10-04 13:44:46
> [   24.951140] EXT4-fs (vdc): shut down requested (1)
> [   24.952280] Aborting journal on device vdc-8.
> [   28.012724] EXT4-fs (vdc): shut down requested (2)
> [   28.013639] Aborting journal on device vdc-8.
> [   28.014486]
> [   28.014845] ============================================
> [   28.015996] WARNING: possible recursive locking detected
> [   28.017072] 5.3.0-rc4-xfstests-00012-gedca88337ca9 #1202 Not tainted
> [   28.018374] --------------------------------------------
> [   28.019693] jbd2/vdc-8/1476 is trying to acquire lock:
> [   28.020635] 000000005ce13aef (&(&sbi->s_fc_lock)->rlock){+.+.}, at: ext4_journal_fc_cleanup_cb+0x2f/0xa0
> [   28.022387]
> [   28.022387] but task is already holding lock:
> [   28.023414] 000000005ce13aef (&(&sbi->s_fc_lock)->rlock){+.+.}, at: ext4_journal_fc_commit_cb+0x83/0xa90
> [   28.025237]
> [   28.025237] other info that might help us debug this:
> [   28.026350]  Possible unsafe locking scenario:
> [   28.026350]
> [   28.027336]        CPU0
> [   28.027758]        ----
> [   28.028240]   lock(&(&sbi->s_fc_lock)->rlock);
> [   28.029105]   lock(&(&sbi->s_fc_lock)->rlock);
> [   28.029937]
> [   28.029937]  *** DEADLOCK ***
> [   28.029937]
> [   28.031154]  May be due to missing lock nesting notation
> [   28.031154]
> [   28.032780] 1 lock held by jbd2/vdc-8/1476:
> [   28.033760]  #0: 000000005ce13aef (&(&sbi->s_fc_lock)->rlock){+.+.}, at: ext4_journal_fc_commit_cb+0x83/0xa90
> [   28.035436]
> [   28.035436] stack backtrace:
> [   28.036197] CPU: 1 PID: 1476 Comm: jbd2/vdc-8 Not tainted 5.3.0-rc4-xfstests-00012-gedca88337ca9 #1202
> [   28.037868] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
> [   28.039289] Call Trace:
> [   28.039772]  dump_stack+0x67/0x90
> [   28.040427]  validate_chain.cold+0x1be/0x21b
> [   28.041305]  __lock_acquire+0x447/0x7c0
> [   28.042069]  lock_acquire+0x9a/0x180
> [   28.042738]  ? ext4_journal_fc_cleanup_cb+0x2f/0xa0
> [   28.043663]  _raw_spin_lock+0x31/0x80
> [   28.044346]  ? ext4_journal_fc_cleanup_cb+0x2f/0xa0
> [   28.045264]  ext4_journal_fc_cleanup_cb+0x2f/0xa0
> [   28.046154]  jbd2_journal_commit_transaction+0x243/0x24bb
> [   28.047156]  ? sched_clock_cpu+0xc/0xc0
> [   28.048099]  ? lock_timer_base+0x10/0x80
> [   28.048935]  ? kvm_sched_clock_read+0x14/0x30
> [   28.050022]  ? sched_clock+0x5/0x10
> [   28.050853]  ? sched_clock_cpu+0xc/0xc0
> [   28.051793]  ? kjournald2+0x143/0x3f0
> [   28.052606]  kjournald2+0x143/0x3f0
> [   28.053311]  ? __wake_up_common_lock+0xc0/0xc0
> [   28.054935]  kthread+0x108/0x140
> [   28.055975]  ? __jbd2_debug+0x50/0x50
> [   28.057105]  ? __kthread_create_on_node+0x1a0/0x1a0
> [   28.058346]  ret_from_fork+0x3a/0x50

      reply	other threads:[~2019-10-04 20:12 UTC|newest]

Thread overview: 36+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-10-01  7:40 [PATCH v3 00/13] ext4: add fast commit support Harshad Shirwadkar
2019-10-01  7:40 ` [PATCH v3 01/13] ext4: add handling for extended mount options Harshad Shirwadkar
2019-10-16  2:14   ` Theodore Y. Ts'o
2019-10-21 20:41     ` harshad shirwadkar
2019-10-01  7:40 ` [PATCH v3 02/13] jbd2: fast commit setup and enable Harshad Shirwadkar
2019-10-16 13:03   ` Theodore Y. Ts'o
2019-10-01  7:40 ` [PATCH v3 03/13] jbd2: fast-commit commit path changes Harshad Shirwadkar
2019-10-16 16:38   ` Theodore Y. Ts'o
2019-10-01  7:40 ` [PATCH v3 04/13] jbd2: fast-commit commit path new APIs Harshad Shirwadkar
2019-10-16 17:20   ` Theodore Y. Ts'o
2019-10-01  7:40 ` [PATCH v3 05/13] jbd2: fast-commit recovery path changes Harshad Shirwadkar
2019-10-16 17:30   ` Theodore Y. Ts'o
2019-10-22  0:51     ` harshad shirwadkar
2019-10-01  7:40 ` [PATCH v3 06/13] ext4: add fields that are needed to track changed files Harshad Shirwadkar
2019-10-16 18:26   ` Theodore Y. Ts'o
2019-10-01  7:40 ` [PATCH v3 07/13] ext4: track changed files for fast commit Harshad Shirwadkar
2019-10-16 20:26   ` Theodore Y. Ts'o
2019-10-01  7:40 ` [PATCH v3 08/13] ext4: fast-commit commit range tracking Harshad Shirwadkar
2019-10-16 21:36   ` Theodore Y. Ts'o
2019-10-30  5:12     ` harshad shirwadkar
2019-10-01  7:40 ` [PATCH v3 09/13] ext4: fast-commit commit path changes Harshad Shirwadkar
2019-10-16 22:45   ` Theodore Y. Ts'o
     [not found]     ` <CAAJeciXQiE022GqcsTr35jSqjA6eH+zBS2KNvDPj5PovButdYA@mail.gmail.com>
2019-10-23 12:44       ` Theodore Y. Ts'o
2019-10-01  7:40 ` [PATCH v3 10/13] ext4: fast-commit recovery " Harshad Shirwadkar
2019-10-18  2:07   ` Theodore Y. Ts'o
2019-10-01  7:41 ` [PATCH v3 11/13] ext4: add support for asynchronous fast commits Harshad Shirwadkar
2019-10-25  6:28   ` Xiaoguang Wang
2019-10-01  7:41 ` [PATCH v3 12/13] docs: Add fast commit documentation Harshad Shirwadkar
2019-10-18  1:56   ` Theodore Y. Ts'o
2019-10-18  4:51     ` Andreas Dilger
2019-10-18 13:28       ` Theodore Y. Ts'o
2019-10-31 18:53         ` Andreas Dilger
2019-10-31  5:34     ` harshad shirwadkar
2019-10-31  6:41       ` harshad shirwadkar
2019-10-04 19:12 ` [PATCH v3 00/13] ext4: add fast commit support Theodore Y. Ts'o
2019-10-04 20:11   ` harshad shirwadkar [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='CAD+ocbyQOwH=+L6cmo14m9zfDV2YtZOGYb=Cgv_V+=oVSCfjCQ@mail.gmail.com' \
    --to=harshadshirwadkar@gmail.com \
    --cc=linux-ext4@vger.kernel.org \
    --cc=tytso@mit.edu \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).