From: Thomas Schaefer <Thomas.Schaefer@kontron.com>
To: "lukma@denx.de" <lukma@denx.de>
Cc: "sharvari.harisangam@nxp.com" <sharvari.harisangam@nxp.com>,
"ganapathi.bhat@nxp.com" <ganapathi.bhat@nxp.com>,
"linux-firmware@kernel.org" <linux-firmware@kernel.org>,
"pali@kernel.org" <pali@kernel.org>,
"marek.behun@nic.cz" <marek.behun@nic.cz>
Subject: Re: wifi: 88W8801: Newest firmware for sd8801_uapsta.bin bug
Date: Wed, 6 Jul 2022 12:35:19 +0000 [thread overview]
Message-ID: <AM0PR10MB20821250660BE6D170C20694F7809@AM0PR10MB2082.EURPRD10.PROD.OUTLOOK.COM> (raw)
Hi Lukasz,
> Dear Ganapathi and Sharvari
>
> > Dear Ganapathi and Sharvari
> >
> > > Hi Pali,
> > >
> > > > On Saturday 08 May 2021 13:29:11 Pali Rohár wrote:
> > > > > + Sharvari and Ganapathi
> > > > >
> > > > > To let you know about this mwifiex firmware issue. Could you
> > > > > look at it?
> > > > >
> > > > > On Friday 07 May 2021 15:17:02 Lukasz Majewski wrote:
> > > > > > Dear community,
> > > > > >
> > > > > > I would like to report that the version: 14.68.36.p204 of
> > > > > > sd8801_uapsta.bin binary (newest, SHA1:
> > > > > > ecdfcf8e2ca15f5682ab94fd30ba29fb869b24a7) has the issue with
> > > > > > getting channel info (HostCmd_CMD_STA_CONFIGURE command
> > > > > > execution).
> > > > > >
> > > > > > As a result the module seems to be stuck and no transmission
> > > > > > is performed.
> > > > > >
> > > > > > The issue is not present in 14.68.36.p146 verson of the
> > > > > > firmware.
> > > >
> > > > And FYI, NXP has newer version 14.76.36.p139 of this
> > > > sd8801_uapsta.bin firmware in their mwifiex-firmware github
> > > > repository:
> > > >
> > > > https://github.com/NXP/mwifiex-firmware/commit/c38b125a920a695d360b62e8b1f7fb1c4e1afd46
> > > >
> > > > I hope that Sharvari or Ganapathi brings some light in this
> > > > issue...
> > >
> > > Thanks for sharing this issue with NXP developers.
> > >
> > > >
> > > > Lukasz, meanwhile could you try to check if this new firmware
> > > > version has this issue fixed?
> > > >
> > >
> > > It looks like the issue is still there (even new errors pops up when
> > > compared to the original one):
> > >
> > > root@mx6ul:~# dmesg|grep sdio
> > > [ 29.025231] mwifiex_sdio mmc0:0001:1: info: FW download over,
> > > size 262660 bytes [ 29.310488] mwifiex_sdio mmc0:0001:1: WLAN FW
> > > is active [ 29.390778] mwifiex_sdio mmc0:0001:1: CMD_RESP: cmd
> > > 0x242 error, result=0x2 [ 29.398245] mwifiex_sdio mmc0:0001:1:
> > > mwifiex_process_cmdresp: cmd 0x242 failed during
> > > initialization [ 29.707952] mwifiex_sdio mmc0:0001:1: info:
> > > MWIFIEX VERSION: mwifiex 1.0 (14.76.36.p139) [ 29.717360]
> > > mwifiex_sdio mmc0:0001:1: driver_version = mwifiex 1.0
> > > (14.76.36.p139)
> > >
> > > root@mx6ul:~# ./tst_sdio.sh
> > > + wpa_supplicant -B -i mlan0 -c /etc/wpa_supplicant.conf
> > > Successfully initialized wpa_supplicant
> > > + sleep 3
> > > [ 251.425350] mwifiex_sdio mmc0:0001:1: CMD_RESP: cmd 0x107 error,
> > > result=0x2
> > > + udhcpc -i mlan0
> > > udhcpc: started, v1.31.1
> > > udhcpc: sending discover
> > > [ 256.476210] mwifiex_sdio mmc0:0001:1: CMD_RESP: cmd 0x107 error,
> > > result=0x2 udhcpc: sending discover
> > > udhcpc: sending discover
> > > [ 261.497057] mwifiex_sdio mmc0:0001:1: CMD_RESP: cmd 0x107 error,
> > > result=0x2 [ 261.507859] ieee80211 phy0: sched_scan start :
> > > n_ssids=1 n_match_sets=1 [ 261.515872] ieee80211 phy0:
> > > n_channels=13 interval=10 ie_len=0
> > >
> > >
> > > Please pay attention to the new "cmd 0x107 error, result=0x2" issue
> > > with this new FW version.
> >
> > Is there any update on this issue? Ganapathi and Sharvari, have you
> > managed to make the STA mode working on with the newest FW for
> > 88W8801 ?
>
> It looks like there was no update on the linux-firmware repository for
> sd8801_uapsta.bin binary in the official linux-firmware tree.
>
> I can share that I've tested: 14.68.36.p160 version with mwifiex driver
> on 5.4.y kernel and the STA mode works.
>
> The used NXP soc is imx6ull, and wi-fi is SDIO connected 88W8801.
>
> However, there is the issue with AP mode. Please find attached logs and
> reproduction procedure.
>
> Is there any schedule for releasing new FW for this wifi chip?
>
I'm facing similar problems with i.MX8MN EVK and u-blox wireless SDIO
module with 88W8801 SoC and mwifiex_sdio driver for linux 5.15.28 kernel.
I tried firmware 14.68.36.p204 and 14.68.36.p60. I'm not able to establish
a WPA protected link using wpa_supplicant.
You mentioned that you have tested with 14.68.36.p160 and 14.68.36.p146
firmware versions without having issues in STA mode. Where did you get
these firmware versions?
I was not able to find them neither in linux-firmware, mwifiex-firmware
nor imx-firmware repositories.
> >
> > Thanks in advance for sharing the knowledge.
> >
> > >
> > > > > > For reproduction one needs to execute:
> > > > > > #! /bin/sh
> > > > > > set -x
> > > > > > wpa_supplicant -B -i mlan0 -c /etc/wpa_supplicant.conf
> > > > > > sleep 3
> > > > > > dhclient mlan0
> > > > > >
> > > > > > exit 0
> > > > > >
> > > > > >
> > > > > >
> > > > > > I'm using the Azurewave AW-NM191NF module (with 88W8801 SoC).
> > > > > >
> > > > > > Best regards,
> > > > > >
> > > > > > Lukasz Majewski
> > > > > >
> > > > > > --
> > > > > >
> > > > > > DENX Software Engineering GmbH, Managing Director:
> > > > > > Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194
> > > > > > Groebenzell, Germany Phone: (+49)-8142-66989-59 Fax:
> > > > > > (+49)-8142-66989-80 Email: lukma@denx.de
> > >
> > >
> > >
> > > Best regards,
> > >
> > > Lukasz Majewski
> > >
> > > --
> > >
> > > DENX Software Engineering GmbH, Managing Director: Wolfgang
> > > Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell,
> > > Germany Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email:
> > > lukma@denx.de
> >
> >
> >
> > Best regards,
> >
> > Lukasz Majewski
> >
> > --
> >
> > DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
> > HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
> > Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email:
> > lukma@denx.de
>
>
>
>
> Best regards,
>
> Lukasz Majewski
>
> --
>
> DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
> Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma@denx.de
Best regards,
Thomas
Thomas Schäfer
SW Design Engineer
Kontron Europe GmbH
Heinrich-Barth-Straße 1-1a | 66115 Saarbrücken | Germany
thomas.schaefer@kontron.com
Kontron | Member of the S&T Group
Please find our mandatory legal statement https://www.kontron.com/en/imprint
Please find our mandatory privacy statement https://www.kontron.com/en/privacy-statement
next reply other threads:[~2022-07-06 12:35 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-07-06 12:35 Thomas Schaefer [this message]
2022-07-07 8:10 ` wifi: 88W8801: Newest firmware for sd8801_uapsta.bin bug Lukasz Majewski
2022-07-07 13:49 ` AW: " Thomas Schaefer
2022-07-07 14:30 ` Lukasz Majewski
-- strict thread matches above, loose matches on Subject: below --
2021-05-07 13:17 Lukasz Majewski
2021-05-08 11:29 ` Pali Rohár
2021-05-08 11:37 ` Pali Rohár
2021-05-10 8:54 ` Lukasz Majewski
2021-05-24 12:58 ` Lukasz Majewski
2022-02-11 11:12 ` Lukasz Majewski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=AM0PR10MB20821250660BE6D170C20694F7809@AM0PR10MB2082.EURPRD10.PROD.OUTLOOK.COM \
--to=thomas.schaefer@kontron.com \
--cc=ganapathi.bhat@nxp.com \
--cc=linux-firmware@kernel.org \
--cc=lukma@denx.de \
--cc=marek.behun@nic.cz \
--cc=pali@kernel.org \
--cc=sharvari.harisangam@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).