From: Johannes Thumshirn <jthumshirn@suse.de>
To: Naohiro Aota <naohiro.aota@wdc.com>
Cc: linux-btrfs@vger.kernel.org, David Sterba <dsterba@suse.com>,
Chris Mason <clm@fb.com>, Josef Bacik <josef@toxicpanda.com>,
Nikolay Borisov <nborisov@suse.com>,
Damien Le Moal <damien.lemoal@wdc.com>,
Hannes Reinecke <hare@suse.com>,
Anand Jain <anand.jain@oracle.com>,
linux-fsdevel@vger.kernel.org
Subject: Re: [PATCH v5 02/28] btrfs: Get zone information of zoned block devices
Date: Wed, 4 Dec 2019 16:37:32 +0100 [thread overview]
Message-ID: <20191204153732.GA2083@Johanness-MacBook-Pro.local> (raw)
In-Reply-To: <20191204081735.852438-3-naohiro.aota@wdc.com>
On Wed, Dec 04, 2019 at 05:17:09PM +0900, Naohiro Aota wrote:
[..]
> +#define LEN (sizeof(device->fs_info->sb->s_id) + sizeof("(device )") - 1)
> + char devstr[LEN];
> + const int len = LEN;
> +#undef LEN
Why not:
const int len = sizeof(device->fs_info->sb->s_id)
+ sizeof("(device )") - 1;
char devstr[len];
But that's bikeshedding territory I admit.
> +
> + if (!bdev_is_zoned(bdev))
> + return 0;
> +
> + zone_info = kzalloc(sizeof(*zone_info), GFP_KERNEL);
> + if (!zone_info)
> + return -ENOMEM;
> +
> + zone_sectors = bdev_zone_sectors(bdev);
> + ASSERT(is_power_of_2(zone_sectors));
> + zone_info->zone_size = (u64)zone_sectors << SECTOR_SHIFT;
> + zone_info->zone_size_shift = ilog2(zone_info->zone_size);
> + zone_info->nr_zones = nr_sectors >> ilog2(bdev_zone_sectors(bdev));
> + if (nr_sectors & (bdev_zone_sectors(bdev) - 1))
> + zone_info->nr_zones++;
You've already cached the return of bdev_zone_sectors(bdev) in
zone_sectors at the beginning of this block and if (x & (y-1)) is the
IS_ALIGNED() macro so the above should really be:
if (!IS_ALIGNED(nr_sectors, zone_sectors))
zone_info->nr_zones++;
> +
> + zone_info->seq_zones = kcalloc(BITS_TO_LONGS(zone_info->nr_zones),
> + sizeof(*zone_info->seq_zones),
> + GFP_KERNEL);
zone_info->seq_zones = bitmap_zalloc(zone_info->nr_zones, GFP_KERNEL);
> + if (!zone_info->seq_zones) {
> + ret = -ENOMEM;
> + goto free_zone_info;
> + }
> +
> + zone_info->empty_zones = kcalloc(BITS_TO_LONGS(zone_info->nr_zones),
> + sizeof(*zone_info->empty_zones),
> + GFP_KERNEL);
zone_info->empty_zones = bitmap_zalloc(zone_info->nr_zones, GFP_KERNEL);
> + if (!zone_info->empty_zones) {
> + ret = -ENOMEM;
> + goto free_seq_zones;
> + }
> +
> + zones = kcalloc(BTRFS_REPORT_NR_ZONES,
> + sizeof(struct blk_zone), GFP_KERNEL);
> + if (!zones) {
> + ret = -ENOMEM;
> + goto free_empty_zones;
> + }
> +
I personally would set nreported = 0 here instead in the declaration block. I
had to scroll up to see what's the initial value, so I think it makes more
sense to initialize it to 0 here.
> + /* Get zones type */
> + while (sector < nr_sectors) {
> + nr_zones = BTRFS_REPORT_NR_ZONES;
> + ret = btrfs_get_dev_zones(device, sector << SECTOR_SHIFT, zones,
> + &nr_zones);
> + if (ret)
> + goto free_zones;
> +
> + for (i = 0; i < nr_zones; i++) {
> + if (zones[i].type == BLK_ZONE_TYPE_SEQWRITE_REQ)
> + set_bit(nreported, zone_info->seq_zones);
> + if (zones[i].cond == BLK_ZONE_COND_EMPTY)
> + set_bit(nreported, zone_info->empty_zones);
> + nreported++;
> + }
> + sector = zones[nr_zones - 1].start + zones[nr_zones - 1].len;
> + }
> +
> + if (nreported != zone_info->nr_zones) {
> + btrfs_err_in_rcu(device->fs_info,
> + "inconsistent number of zones on %s (%u / %u)",
> + rcu_str_deref(device->name), nreported,
> + zone_info->nr_zones);
> + ret = -EIO;
> + goto free_zones;
> + }
> +
> + kfree(zones);
> +
> + device->zone_info = zone_info;
> +
> + devstr[0] = 0;
> + if (device->fs_info)
> + snprintf(devstr, len, " (device %s)",
> + device->fs_info->sb->s_id);
> +
> + rcu_read_lock();
> + pr_info(
> +"BTRFS info%s: host-%s zoned block device %s, %u zones of %llu sectors",
> + devstr,
> + bdev_zoned_model(bdev) == BLK_ZONED_HM ? "managed" : "aware",
> + rcu_str_deref(device->name), zone_info->nr_zones,
> + zone_info->zone_size >> SECTOR_SHIFT);
> + rcu_read_unlock();
btrfs_info_in_rcu()?
> +
> + return 0;
> +
> +free_zones:
> + kfree(zones);
> +free_empty_zones:
> + kfree(zone_info->empty_zones);
bitmap_free(zone_info->empty_zones);
> +free_seq_zones:
> + kfree(zone_info->seq_zones);
bitmap_free(zone_info->seq_zones);
> +free_zone_info:
> + kfree(zone_info);
> +
> + return ret;
> +}
> +
> +void btrfs_destroy_dev_zone_info(struct btrfs_device *device)
> +{
> + struct btrfs_zoned_device_info *zone_info = device->zone_info;
> +
> + if (!zone_info)
> + return;
> +
> + kfree(zone_info->seq_zones);
> + kfree(zone_info->empty_zones);
bitmap_free(zone_info->seq_zones);
bitmap_free(zone_info->empty_zones);
Thanks,
Johannes
next prev parent reply other threads:[~2019-12-04 15:37 UTC|newest]
Thread overview: 48+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-04 8:17 [PATCH v5 00/28] btrfs: zoned block device support Naohiro Aota
2019-12-04 8:17 ` [PATCH v5 01/28] btrfs: introduce HMZONED feature flag Naohiro Aota
2019-12-04 8:17 ` [PATCH v5 02/28] btrfs: Get zone information of zoned block devices Naohiro Aota
2019-12-04 15:37 ` Johannes Thumshirn [this message]
2019-12-04 17:22 ` David Sterba
2019-12-05 6:29 ` Naohiro Aota
2019-12-05 6:28 ` Naohiro Aota
2019-12-07 9:47 ` Anand Jain
2019-12-10 4:41 ` Naohiro Aota
2019-12-04 8:17 ` [PATCH v5 03/28] btrfs: Check and enable HMZONED mode Naohiro Aota
2019-12-04 16:07 ` Johannes Thumshirn
2019-12-05 5:17 ` Naohiro Aota
2019-12-05 15:28 ` David Sterba
2019-12-04 8:17 ` [PATCH v5 04/28] btrfs: disallow RAID5/6 in " Naohiro Aota
2019-12-04 8:17 ` [PATCH v5 05/28] btrfs: disallow space_cache " Naohiro Aota
2019-12-05 7:21 ` Johannes Thumshirn
2019-12-05 15:39 ` David Sterba
2019-12-06 5:32 ` Naohiro Aota
2019-12-06 15:12 ` David Sterba
2019-12-04 8:17 ` [PATCH v5 06/28] btrfs: disallow NODATACOW " Naohiro Aota
2019-12-05 7:58 ` Johannes Thumshirn
2019-12-05 15:31 ` David Sterba
2019-12-06 5:37 ` Naohiro Aota
2019-12-04 8:17 ` [PATCH v5 07/28] btrfs: disable fallocate " Naohiro Aota
2019-12-05 8:00 ` Johannes Thumshirn
2019-12-04 8:17 ` [PATCH v5 08/28] btrfs: implement log-structured superblock for " Naohiro Aota
2019-12-04 8:17 ` [PATCH v5 09/28] btrfs: align device extent allocation to zone boundary Naohiro Aota
2019-12-05 8:56 ` Johannes Thumshirn
2019-12-06 5:45 ` Naohiro Aota
2019-12-04 8:17 ` [PATCH v5 10/28] btrfs: do sequential extent allocation in HMZONED mode Naohiro Aota
2019-12-04 8:17 ` [PATCH v5 11/28] btrfs: make unmirroed BGs readonly only if we have at least one writable BG Naohiro Aota
2019-12-04 8:17 ` [PATCH v5 12/28] btrfs: ensure metadata space available on/after degraded mount in HMZONED Naohiro Aota
2019-12-04 8:17 ` [PATCH v5 13/28] btrfs: reset zones of unused block groups Naohiro Aota
2019-12-04 8:17 ` [PATCH v5 14/28] btrfs: redirty released extent buffers in HMZONED mode Naohiro Aota
2019-12-04 8:17 ` [PATCH v5 15/28] btrfs: serialize data allocation and submit IOs Naohiro Aota
2019-12-04 8:17 ` [PATCH v5 16/28] btrfs: implement atomic compressed IO submission Naohiro Aota
2019-12-04 8:17 ` [PATCH v5 17/28] btrfs: support direct write IO in HMZONED Naohiro Aota
2019-12-04 8:17 ` [PATCH v5 18/28] btrfs: serialize meta IOs on HMZONED mode Naohiro Aota
2019-12-04 8:17 ` [PATCH v5 19/28] btrfs: wait existing extents before truncating Naohiro Aota
2019-12-04 8:17 ` [PATCH v5 20/28] btrfs: avoid async checksum on HMZONED mode Naohiro Aota
2019-12-04 8:17 ` [PATCH v5 21/28] btrfs: disallow mixed-bg in " Naohiro Aota
2019-12-04 8:17 ` [PATCH v5 22/28] btrfs: disallow inode_cache " Naohiro Aota
2019-12-04 8:17 ` [PATCH v5 23/28] btrfs: support dev-replace " Naohiro Aota
2019-12-04 8:17 ` [PATCH v5 24/28] btrfs: enable relocation " Naohiro Aota
2019-12-04 8:17 ` [PATCH v5 25/28] btrfs: relocate block group to repair IO failure in HMZONED Naohiro Aota
2019-12-04 8:17 ` [PATCH v5 26/28] btrfs: split alloc_log_tree() Naohiro Aota
2019-12-04 8:17 ` [PATCH v5 27/28] btrfs: enable tree-log on HMZONED mode Naohiro Aota
2019-12-04 8:17 ` [PATCH v5 28/28] btrfs: enable to mount HMZONED incompat flag Naohiro Aota
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191204153732.GA2083@Johanness-MacBook-Pro.local \
--to=jthumshirn@suse.de \
--cc=anand.jain@oracle.com \
--cc=clm@fb.com \
--cc=damien.lemoal@wdc.com \
--cc=dsterba@suse.com \
--cc=hare@suse.com \
--cc=josef@toxicpanda.com \
--cc=linux-btrfs@vger.kernel.org \
--cc=linux-fsdevel@vger.kernel.org \
--cc=naohiro.aota@wdc.com \
--cc=nborisov@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).