From: John Hubbard <jhubbard@nvidia.com>
To: Tom Talpey <tom@talpey.com>, <john.hubbard@gmail.com>,
Andrew Morton <akpm@linux-foundation.org>, <linux-mm@kvack.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>,
Christian Benvenuti <benve@cisco.com>,
Christoph Hellwig <hch@infradead.org>,
Christopher Lameter <cl@linux.com>,
Dan Williams <dan.j.williams@intel.com>,
Dave Chinner <david@fromorbit.com>,
Dennis Dalessandro <dennis.dalessandro@intel.com>,
Doug Ledford <dledford@redhat.com>, Jan Kara <jack@suse.cz>,
Jason Gunthorpe <jgg@ziepe.ca>,
Jerome Glisse <jglisse@redhat.com>,
Matthew Wilcox <willy@infradead.org>,
Michal Hocko <mhocko@kernel.org>,
Mike Rapoport <rppt@linux.ibm.com>,
Mike Marciniszyn <mike.marciniszyn@intel.com>,
Ralph Campbell <rcampbell@nvidia.com>,
LKML <linux-kernel@vger.kernel.org>,
<linux-fsdevel@vger.kernel.org>
Subject: Re: [PATCH 0/6] RFC v2: mm: gup/dma tracking
Date: Tue, 5 Feb 2019 00:22:40 -0800 [thread overview]
Message-ID: <80d503f5-038b-7f0b-90d5-e5b9537ae1df@nvidia.com> (raw)
In-Reply-To: <dbca5400-b0c0-0958-c3ba-ff672f301799@talpey.com>
On 2/4/19 5:41 PM, Tom Talpey wrote:
> On 2/4/2019 12:21 AM, john.hubbard@gmail.com wrote:
>> From: John Hubbard <jhubbard@nvidia.com>
>>
>>
>> Performance: here is an fio run on an NVMe drive, using this for the fio
>> configuration file:
>>
>> [reader]
>> direct=1
>> ioengine=libaio
>> blocksize=4096
>> size=1g
>> numjobs=1
>> rw=read
>> iodepth=64
>>
>> reader: (g=0): rw=read, bs=(R) 4096B-4096B, (W) 4096B-4096B, (T)
>> 4096B-4096B, ioengine=libaio, iodepth=64
>> fio-3.3
>> Starting 1 process
>> Jobs: 1 (f=1)
>> reader: (groupid=0, jobs=1): err= 0: pid=7011: Sun Feb 3 20:36:51 2019
>> read: IOPS=190k, BW=741MiB/s (778MB/s)(1024MiB/1381msec)
>> slat (nsec): min=2716, max=57255, avg=4048.14, stdev=1084.10
>> clat (usec): min=20, max=12485, avg=332.63, stdev=191.77
>> lat (usec): min=22, max=12498, avg=336.72, stdev=192.07
>> clat percentiles (usec):
>> | 1.00th=[ 322], 5.00th=[ 322], 10.00th=[ 322], 20.00th=[
>> 326],
>> | 30.00th=[ 326], 40.00th=[ 326], 50.00th=[ 326], 60.00th=[
>> 326],
>> | 70.00th=[ 326], 80.00th=[ 330], 90.00th=[ 330], 95.00th=[
>> 330],
>> | 99.00th=[ 478], 99.50th=[ 717], 99.90th=[ 1074], 99.95th=[
>> 1090],
>> | 99.99th=[12256]
>
> These latencies are concerning. The best results we saw at the end of
> November (previous approach) were MUCH flatter. These really start
> spiking at three 9's, and are sky-high at four 9's. The "stdev" values
> for clat and lat are about 10 times the previous. There's some kind
> of serious queuing contention here, that wasn't there in November.
Hi Tom,
I think this latency problem is also there in the baseline kernel, but...
>
>> bw ( KiB/s): min=730152, max=776512, per=99.22%, avg=753332.00,
>> stdev=32781.47, samples=2
>> iops : min=182538, max=194128, avg=188333.00,
>> stdev=8195.37, samples=2
>> lat (usec) : 50=0.01%, 100=0.01%, 250=0.07%, 500=99.26%, 750=0.38%
>> lat (usec) : 1000=0.02%
>> lat (msec) : 2=0.24%, 20=0.02%
>> cpu : usr=15.07%, sys=84.13%, ctx=10, majf=0, minf=74
>
> System CPU 84% is roughly double the November results of 45%. Ouch.
That's my fault. First of all, I had a few extra, supposedly minor debug
settings in the .config, which I'm removing now--I'm doing a proper run
with the original .config file from November, below. Second, I'm not
sure I controlled the run carefully enough.
>
> Did you re-run the baseline on the new unpatched base kernel and can
> we see the before/after?
Doing that now, I see:
-- No significant perf difference between before and after, but
-- Still high clat in the 99.99th
=======================================================================
Before: using commit 8834f5600cf3 ("Linux 5.0-rc5")
===================================================
reader: (g=0): rw=read, bs=(R) 4096B-4096B, (W) 4096B-4096B, (T)
4096B-4096B, ioengine=libaio, iodepth=64
fio-3.3
Starting 1 process
Jobs: 1 (f=1)
reader: (groupid=0, jobs=1): err= 0: pid=1829: Tue Feb 5 00:08:08 2019
read: IOPS=193k, BW=753MiB/s (790MB/s)(1024MiB/1359msec)
slat (nsec): min=1269, max=40309, avg=1493.66, stdev=534.83
clat (usec): min=127, max=12249, avg=329.83, stdev=184.92
lat (usec): min=129, max=12256, avg=331.35, stdev=185.06
clat percentiles (usec):
| 1.00th=[ 326], 5.00th=[ 326], 10.00th=[ 326], 20.00th=[ 326],
| 30.00th=[ 326], 40.00th=[ 326], 50.00th=[ 326], 60.00th=[ 326],
| 70.00th=[ 326], 80.00th=[ 326], 90.00th=[ 326], 95.00th=[ 326],
| 99.00th=[ 347], 99.50th=[ 519], 99.90th=[ 529], 99.95th=[ 537],
| 99.99th=[12125]
bw ( KiB/s): min=755032, max=781472, per=99.57%, avg=768252.00,
stdev=18695.90, samples=2
iops : min=188758, max=195368, avg=192063.00, stdev=4673.98,
samples=2
lat (usec) : 250=0.08%, 500=99.18%, 750=0.72%
lat (msec) : 20=0.02%
cpu : usr=12.30%, sys=46.83%, ctx=253554, majf=0, minf=74
IO depths : 1=0.1%, 2=0.1%, 4=0.1%, 8=0.1%, 16=0.1%, 32=0.1%,
>=64=100.0%
submit : 0=0.0%, 4=100.0%, 8=0.0%, 16=0.0%, 32=0.0%, 64=0.0%,
>=64=0.0%
complete : 0=0.0%, 4=100.0%, 8=0.0%, 16=0.0%, 32=0.0%, 64=0.1%,
>=64=0.0%
issued rwts: total=262144,0,0,0 short=0,0,0,0 dropped=0,0,0,0
latency : target=0, window=0, percentile=100.00%, depth=64
Run status group 0 (all jobs):
READ: bw=753MiB/s (790MB/s), 753MiB/s-753MiB/s (790MB/s-790MB/s),
io=1024MiB (1074MB), run=1359-1359msec
Disk stats (read/write):
nvme0n1: ios=221246/0, merge=0/0, ticks=71556/0, in_queue=704,
util=91.35%
=======================================================================
After:
=======================================================================
reader: (g=0): rw=read, bs=(R) 4096B-4096B, (W) 4096B-4096B, (T)
4096B-4096B, ioengine=libaio, iodepth=64
fio-3.3
Starting 1 process
Jobs: 1 (f=1)
reader: (groupid=0, jobs=1): err= 0: pid=1803: Mon Feb 4 23:58:07 2019
read: IOPS=193k, BW=753MiB/s (790MB/s)(1024MiB/1359msec)
slat (nsec): min=1276, max=41900, avg=1505.36, stdev=565.26
clat (usec): min=177, max=12186, avg=329.88, stdev=184.03
lat (usec): min=178, max=12192, avg=331.42, stdev=184.16
clat percentiles (usec):
| 1.00th=[ 326], 5.00th=[ 326], 10.00th=[ 326], 20.00th=[ 326],
| 30.00th=[ 326], 40.00th=[ 326], 50.00th=[ 326], 60.00th=[ 326],
| 70.00th=[ 326], 80.00th=[ 326], 90.00th=[ 326], 95.00th=[ 326],
| 99.00th=[ 359], 99.50th=[ 498], 99.90th=[ 537], 99.95th=[ 627],
| 99.99th=[12125]
bw ( KiB/s): min=754656, max=781504, per=99.55%, avg=768080.00,
stdev=18984.40, samples=2
iops : min=188664, max=195378, avg=192021.00, stdev=4747.51,
samples=2
lat (usec) : 250=0.12%, 500=99.40%, 750=0.46%
lat (msec) : 20=0.02%
cpu : usr=12.44%, sys=47.05%, ctx=252127, majf=0, minf=73
IO depths : 1=0.1%, 2=0.1%, 4=0.1%, 8=0.1%, 16=0.1%, 32=0.1%,
>=64=100.0%
submit : 0=0.0%, 4=100.0%, 8=0.0%, 16=0.0%, 32=0.0%, 64=0.0%,
>=64=0.0%
complete : 0=0.0%, 4=100.0%, 8=0.0%, 16=0.0%, 32=0.0%, 64=0.1%,
>=64=0.0%
issued rwts: total=262144,0,0,0 short=0,0,0,0 dropped=0,0,0,0
latency : target=0, window=0, percentile=100.00%, depth=64
Run status group 0 (all jobs):
READ: bw=753MiB/s (790MB/s), 753MiB/s-753MiB/s (790MB/s-790MB/s),
io=1024MiB (1074MB), run=1359-1359msec
Disk stats (read/write):
nvme0n1: ios=221203/0, merge=0/0, ticks=71291/0, in_queue=704,
util=91.19%
How's this look to you?
thanks,
--
John Hubbard
NVIDIA
next prev parent reply other threads:[~2019-02-05 8:22 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-02-04 5:21 [PATCH 0/6] RFC v2: mm: gup/dma tracking john.hubbard
2019-02-04 5:21 ` [PATCH 1/6] mm: introduce put_user_page*(), placeholder versions john.hubbard
2019-02-04 5:21 ` [PATCH 2/6] infiniband/mm: convert put_page() to put_user_page*() john.hubbard
2019-02-04 5:21 ` [PATCH 3/6] mm: page_cache_add_speculative(): refactoring john.hubbard
2019-02-04 5:21 ` [PATCH 4/6] mm/gup: track gup-pinned pages john.hubbard
2019-02-04 18:19 ` Matthew Wilcox
2019-02-04 19:11 ` John Hubbard
2019-02-20 19:24 ` Ira Weiny
2019-02-20 20:22 ` John Hubbard
2019-02-04 5:21 ` [PATCH 5/6] mm/gup: /proc/vmstat support for get/put user pages john.hubbard
2019-02-04 5:21 ` [PATCH 6/6] mm/gup: Documentation/vm/get_user_pages.rst, MAINTAINERS john.hubbard
2019-02-05 16:40 ` Mike Rapoport
2019-02-05 21:53 ` John Hubbard
2019-02-04 16:08 ` [PATCH 0/6] RFC v2: mm: gup/dma tracking Christopher Lameter
2019-02-04 16:12 ` Christoph Hellwig
2019-02-04 16:59 ` Christopher Lameter
2019-02-04 17:14 ` Christopher Lameter
2019-02-04 17:51 ` Jason Gunthorpe
2019-02-04 18:21 ` Christopher Lameter
2019-02-04 19:09 ` Matthew Wilcox
2019-02-04 23:35 ` Ira Weiny
2019-02-05 19:30 ` Christopher Lameter
2019-02-05 1:41 ` Tom Talpey
2019-02-05 8:22 ` John Hubbard [this message]
2019-02-05 13:38 ` Tom Talpey
2019-02-05 21:55 ` John Hubbard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=80d503f5-038b-7f0b-90d5-e5b9537ae1df@nvidia.com \
--to=jhubbard@nvidia.com \
--cc=akpm@linux-foundation.org \
--cc=benve@cisco.com \
--cc=cl@linux.com \
--cc=dan.j.williams@intel.com \
--cc=david@fromorbit.com \
--cc=dennis.dalessandro@intel.com \
--cc=dledford@redhat.com \
--cc=hch@infradead.org \
--cc=jack@suse.cz \
--cc=jgg@ziepe.ca \
--cc=jglisse@redhat.com \
--cc=john.hubbard@gmail.com \
--cc=linux-fsdevel@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=mhocko@kernel.org \
--cc=mike.marciniszyn@intel.com \
--cc=rcampbell@nvidia.com \
--cc=rppt@linux.ibm.com \
--cc=tom@talpey.com \
--cc=viro@zeniv.linux.org.uk \
--cc=willy@infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).